[Tue Feb 21 04:52:55 2012] Detection parameters:
  Position = (191.9, 527.7) = 0 42 41.61 41 21 5.5
  Extent = 0.5" x 0.5", rotation angle = 32 degrees
  Source counts = 16.9 +/- 4.1
  Background counts = 0.1
  Rate = 0.004 +/- 0.001

[Tue Feb 21 04:52:56 2012] Off-axis axis estimate = 4.50'
[Tue Feb 21 05:21:01 2012] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:21:01 2012] Initial guess for spatial extent in simple fitting = 0.99"
[Tue Feb 21 05:21:01 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Tue Feb 21 05:21:01 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 0.99"
[Tue Feb 21 05:33:54 2012] fullrun_ccd2_acisf11838_pi14-548_cl_pass0_src8.ximg exists
[Tue Feb 21 05:33:54 2012] Warning: total counts is not > 0
[Tue Feb 21 05:33:54 2012] fullrun_ccd2_acisf11838_pi14-548_cl_pass0_src8_1.ximg exists
[Tue Feb 21 05:33:54 2012] Warning: total counts is not > 0
[Tue Feb 21 05:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11838_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11838_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:33:54 2012] fullrun_ccd2_acisf11838_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Tue Feb 21 05:33:54 2012] Warning: total counts is not > 0
[Tue Feb 21 05:33:54 2012] fullrun_ccd2_acisf11838_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Feb 21 05:33:54 2012] Warning: total counts is not > 0
[Tue Feb 21 05:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11838_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11838_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:10 2012] Source 6 is offset by 3.854836 and 7.732530 pixels which is larger than
2 X fitted extent = 1.007033 x 1.007033, not incorporating fit results
[Tue Feb 21 06:13:10 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:13:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:13:10 2012] Assessing source extent using major
[Tue Feb 21 06:13:10 2012] Source does appear to be extended
[Tue Feb 21 06:13:10 2012] Computing asymmetry using major and minor axis, asym = 1.04
[Tue Feb 21 06:30:56 2012] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:30:56 2012] Initial guess for spatial extent in simple fitting = 0.99"
[Tue Feb 21 06:30:56 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Tue Feb 21 06:30:56 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.99"
[Tue Feb 21 06:41:49 2012] fullrun_ccd2_acisf11838_pi14-548_cl_pass1_src6.ximg exists
[Tue Feb 21 06:41:49 2012] Warning: total counts is not > 0
[Tue Feb 21 06:41:49 2012] fullrun_ccd2_acisf11838_pi14-548_cl_pass1_src6_1.ximg exists
[Tue Feb 21 06:41:49 2012] Warning: total counts is not > 0
[Tue Feb 21 06:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11838_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11838_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:41:49 2012] fullrun_ccd2_acisf11838_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Tue Feb 21 06:41:49 2012] Warning: total counts is not > 0
[Tue Feb 21 06:41:49 2012] fullrun_ccd2_acisf11838_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Feb 21 06:41:49 2012] Warning: total counts is not > 0
[Tue Feb 21 06:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11838_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11838_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:13:07 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.050376 pixels away
[Tue Feb 21 07:13:07 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:13:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:13:07 2012] Assessing source extent using major
[Tue Feb 21 07:13:07 2012] Source does appear to be extended
[Tue Feb 21 07:13:07 2012] Computing asymmetry using major and minor axis, asym = 1.04
[Tue Feb 21 07:17:13 2012] Writing source region out to fullrun_ccd2_acisf11838_pi14-548_pass1_cl_src6_src.reg
[Tue Feb 21 07:17:13 2012] Extracting stamp from image fullrun_ccd2_acisf11838_pi14-548_cl_sm2.00.img.gz, (168, 504) - (215, 551)
[Tue Feb 21 07:17:13 2012] Writing fullrun_ccd2_acisf11838_pi14-548_pass1_cl_src6.gif
[Tue Feb 21 07:18:23 2012] ../../acisf11838/products/events/fullrun_ccd2_acisf11838_pi14-548_pass1_cl_src6_src.evt.gz[events] does not have any counts, not extracting products.
[Tue Feb 21 07:19:11 2012] No arf file found
[Tue Feb 21 07:27:25 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:27:25 2012] Error reading totcts from fullrun_ccd2_acisf11838_pi14-548_pass1_cl_src6_src.pi
[Tue Feb 21 07:27:25 2012] No arf file for this source, not re-computing flux
[Tue Feb 21 07:27:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 07:27:36 2012] acisf11838/analysis//spectral/fullrun_ccd2_acisf11838_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete