[Tue Feb 21 04:52:53 2012] Detection parameters:
  Position = (239.8, 195.2) = 0 43 21.12 41 17 51.1
  Extent = 1.1" x 0.9", rotation angle = 13 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.003 +/- 0.0009

[Tue Feb 21 04:52:53 2012] Off-axis axis estimate = 7.10'
[Tue Feb 21 04:54:22 2012] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 04:54:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 04:54:22 2012] Initial guess for spatial extent in simple fitting = 2.24"
[Tue Feb 21 04:54:22 2012] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.980
[Tue Feb 21 04:54:22 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 2.24"
[Tue Feb 21 05:06:40 2012] fullrun_ccd0_acisf11838_pi14-548_cl_pass0_src5.ximg exists
[Tue Feb 21 05:06:40 2012] fullrun_ccd0_acisf11838_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Feb 21 05:06:40 2012] Fit fullrun_ccd0_acisf11838_pi14-548_cl_pass0_src5 appears to have run properly
[Tue Feb 21 05:06:40 2012] fullrun_ccd0_acisf11838_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Feb 21 05:06:40 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11838_pi14-548_cl_pass0_tfrozen_src5.csv
[Tue Feb 21 05:06:40 2012] fullrun_ccd0_acisf11838_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Feb 21 05:06:40 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11838_pi14-548_cl_pass0_tfrozen_src5.csv
[Tue Feb 21 05:06:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11838_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11838_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:06 2012] Source 8 is offset by -3.007236 and 1.102236 pixels which is larger than
2 X fitted extent = 0.849528 x 0.849528, not incorporating fit results
[Tue Feb 21 06:13:06 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:13:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:13:06 2012] Assessing source extent using major
[Tue Feb 21 06:13:06 2012] Source does appear to be extended
[Tue Feb 21 06:13:06 2012] Computing asymmetry using major and minor axis, asym = 1.21
[Tue Feb 21 06:13:37 2012] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:13:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 06:13:37 2012] Initial guess for spatial extent in simple fitting = 2.24"
[Tue Feb 21 06:13:37 2012] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.980
[Tue Feb 21 06:13:37 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 2.24"
[Tue Feb 21 06:21:50 2012] fullrun_ccd0_acisf11838_pi14-548_cl_pass1_src4.ximg exists
[Tue Feb 21 06:21:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11838_pi14-548_cl_pass1_src4.csv
[Tue Feb 21 06:21:50 2012] fullrun_ccd0_acisf11838_pi14-548_cl_pass1_src4_1.ximg exists
[Tue Feb 21 06:21:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11838_pi14-548_cl_pass1_src4.csv
[Tue Feb 21 06:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11838_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11838_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:21:50 2012] fullrun_ccd0_acisf11838_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Tue Feb 21 06:21:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11838_pi14-548_cl_pass1_tfrozen_src4.csv
[Tue Feb 21 06:21:50 2012] fullrun_ccd0_acisf11838_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Feb 21 06:21:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11838_pi14-548_cl_pass1_tfrozen_src4.csv
[Tue Feb 21 06:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11838_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11838_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:13:04 2012] Source 8 is offset by -3.171098 and 1.257803 pixels which is larger than
2 X fitted extent = 2.275061 x 2.275061, not incorporating fit results
[Tue Feb 21 07:13:04 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:13:04 2012] Assessing source extent using major
[Tue Feb 21 07:13:04 2012] Source does appear to be extended
[Tue Feb 21 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.21
[Tue Feb 21 07:13:29 2012] Writing source region out to fullrun_ccd0_acisf11838_pi14-548_pass1_cl_src8_src.reg
[Tue Feb 21 07:13:29 2012] Extracting stamp from image fullrun_ccd0_acisf11838_pi14-548_cl_sm2.00.img.gz, (192, 147) - (288, 244)
[Tue Feb 21 07:13:29 2012] Writing fullrun_ccd0_acisf11838_pi14-548_pass1_cl_src8.gif
[Tue Feb 21 07:13:57 2012] Size of ../../acisf11838/products/events/fullrun_ccd0_acisf11838_pi14-548_pass1_cl_src8_src.evt.gz[events] = 1 counts
[Tue Feb 21 07:13:57 2012] Mean chipx,y = (297.00, 812.00)
[Tue Feb 21 07:13:57 2012] Mean tdetx,y = (3873.00, 4835.00)
[Tue Feb 21 07:13:57 2012] chipx,y range = (297.00-297.00, 812.00-812.00)
[Tue Feb 21 07:13:57 2012] ../../acisf11838/products/events/fullrun_ccd0_acisf11838_pi14-548_pass1_cl_src8_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Tue Feb 21 07:15:02 2012] No arf file found
[Tue Feb 21 07:27:25 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:27:25 2012] Error reading totcts from fullrun_ccd0_acisf11838_pi14-548_pass1_cl_src8_src.pi
[Tue Feb 21 07:27:25 2012] No arf file for this source, not re-computing flux
[Tue Feb 21 07:27:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 07:27:34 2012] acisf11838/analysis//spectral/fullrun_ccd0_acisf11838_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete