[Sun Feb 12 07:37:45 2012] Detection parameters:
  Position = (866.0, 126.9) = 10 18 52.92 -58 53 9.8
  Extent = 0.5" x 0.5", rotation angle = 149 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.001 +/- 0.0003

[Sun Feb 12 07:37:46 2012] Off-axis axis estimate = 2.17'
[Sun Feb 12 07:40:46 2012] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 07:40:46 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Feb 12 07:40:46 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.754
[Sun Feb 12 07:40:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.45"
[Sun Feb 12 07:52:10 2012] fullrun_ccd1_acisf11831_pi14-548_cl_pass0_src5.ximg exists
[Sun Feb 12 07:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11831_pi14-548_cl_pass0_src5.csv
[Sun Feb 12 07:52:10 2012] fullrun_ccd1_acisf11831_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Feb 12 07:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11831_pi14-548_cl_pass0_src5.csv
[Sun Feb 12 07:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11831_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11831_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 07:52:10 2012] fullrun_ccd1_acisf11831_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Feb 12 07:52:10 2012] fullrun_ccd1_acisf11831_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Feb 12 07:52:10 2012] Fit fullrun_ccd1_acisf11831_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Feb 12 08:12:45 2012] Spatial fit model total counts = 19.038800, observed total counts = 21.000000
[Sun Feb 12 08:12:45 2012] Offset between fit and detection position for source 5 = 0.783604 pixels
[Sun Feb 12 08:12:45 2012] 21.316270 total counts/ 11.922500 bgd. counts: snr = 2.720547
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.783604 pixels
  Position = (866.7, 127.2) = 10 18 52.91 -58 53 9.9
  Extent = 0.3 (0.1-0.4)", rotation angle = 0
  Source counts = 9.4 +/- 4.6
  Background counts = 11.9
  Rate = 0.0009 +/- 0.0005
[Sun Feb 12 08:12:45 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 08:12:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 08:12:45 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 08:12:45 2012] Source does appear to be extended
[Sun Feb 12 08:12:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 08:14:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 08:14:16 2012] Initial guess for spatial extent in simple fitting = 0.30"
[Sun Feb 12 08:14:16 2012] Spatial fitting skipped for pass 1: source                                 has 9.4 net counts, is at off-axis angle 2.2'
[Sun Feb 12 08:53:12 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 08:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 08:53:12 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 08:53:12 2012] Source does appear to be extended
[Sun Feb 12 08:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 08:55:47 2012] Writing source region out to fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5_src.reg
[Sun Feb 12 08:55:47 2012] Extracting stamp from image fullrun_ccd1_acisf11831_pi14-548_cl_sm2.00.img.gz, (853, 113) - (881, 141)
[Sun Feb 12 08:55:47 2012] Writing fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5.gif
[Sun Feb 12 08:57:56 2012] Size of ../../acisf11831/products/events/fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5_src.evt.gz[events] = 10 counts
[Sun Feb 12 08:57:56 2012] Mean chipx,y = (103.70, 855.00)
[Sun Feb 12 08:57:56 2012] Mean tdetx,y = (4277.00, 4210.70)
[Sun Feb 12 08:57:56 2012] chipx,y range = (85.00-117.00, 845.00-877.00)
[Sun Feb 12 08:57:56 2012] Size of ../../acisf11831/products/events/fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 9 counts
[Sun Feb 12 08:57:57 2012] Not generating rmf since there are only 9 counts
[Sun Feb 12 08:57:57 2012] arf not found, will run specextract
[Sun Feb 12 08:58:22 2012] ../../acisf11831/products/spectra/fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5.warf not found
[Sun Feb 12 08:58:22 2012] ../../acisf11831/products/spectra/fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5.wrmf not found
[Sun Feb 12 08:58:22 2012] Removal of ../../acisf11831/products/spectra/fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5.soff failed
[Sun Feb 12 08:59:04 2012] Spectrum 5 has only 9 counts, deleting rmf
[Sun Feb 12 08:59:04 2012] 199.014
[Sun Feb 12 09:02:46 2012] Updating aperture counts using extracted products
[Sun Feb 12 09:02:46 2012] Error reading totcts from fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Feb 12 09:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 09:02:46 2012] Using photon index=1.80, rate=0.000946, arf fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5.arf
[Sun Feb 12 09:02:46 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 09:02:46 2012] Updating source flux to 1.5e-14
[Sun Feb 12 09:02:49 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 09:02:50 2012] acisf11831/analysis//spectral/fullrun_ccd1_acisf11831_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete