[Sun Oct 30 22:17:43 2011] Detection parameters:
  Position = (962.6, 437.9) = 23 26 14.28 26 33 59.8
  Extent = 3.3" x 2.6", rotation angle = 46 degrees
  Source counts = 458.1 +/- 23.6
  Background counts = 96.9
  Rate = 0.008 +/- 0.0004

[Sun Oct 30 22:17:43 2011] Off-axis axis estimate = 9.46'
[Sun Oct 30 23:39:48 2011] Using EEF radius (= 3.96 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 23:39:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 23:39:48 2011] Initial guess for spatial extent in simple fitting = 3.96"
[Sun Oct 30 23:39:48 2011] source mask rpix=8.0, npix_max = 292, mask sum = 289, frac = 0.989
[Sun Oct 30 23:39:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.96"
[Mon Oct 31 00:08:24 2011] fullrun_ccd6_acisf11830_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 31 00:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11830_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 00:08:24 2011] fullrun_ccd6_acisf11830_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 31 00:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11830_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 00:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11830_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11830_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 00:08:24 2011] fullrun_ccd6_acisf11830_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 00:08:24 2011] fullrun_ccd6_acisf11830_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 00:08:24 2011] Fit fullrun_ccd6_acisf11830_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 00:31:28 2011] Spatial fit model total counts = 581.001000, observed total counts = 581.000000
[Mon Oct 31 00:31:28 2011] Offset between fit and detection position for source 18 = 1.097606 pixels
[Mon Oct 31 00:31:28 2011] 581.085800 total counts/ 65.109800 bgd. counts: snr = 63.944960
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.097606 pixels
  Position = (963.4, 438.6) = 23 26 14.27 26 33 59.9
  Extent = 4.8 (4.5-5.2)", rotation angle = 0
  Source counts = 516.0 +/- 24.1
  Background counts = 65.1
  Rate = 0.009 +/- 0.0004
[Mon Oct 31 00:31:28 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 00:31:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 00:31:28 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 00:31:28 2011] Source does appear to be extended
[Mon Oct 31 00:31:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 02:13:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 02:13:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 02:13:00 2011] Initial guess for spatial extent in simple fitting = 4.82"
[Mon Oct 31 02:13:00 2011] source mask rpix=9.8, npix_max = 424, mask sum = 441, frac = 1.039
[Mon Oct 31 02:13:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.82"
[Mon Oct 31 02:39:21 2011] fullrun_ccd6_acisf11830_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 31 02:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11830_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 02:39:21 2011] fullrun_ccd6_acisf11830_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 31 02:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11830_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 02:39:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11830_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11830_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 02:39:21 2011] fullrun_ccd6_acisf11830_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 02:39:21 2011] fullrun_ccd6_acisf11830_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 02:39:21 2011] Fit fullrun_ccd6_acisf11830_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 03:04:19 2011] Spatial fit model total counts = 611.999000, observed total counts = 612.000000
[Mon Oct 31 03:04:19 2011] Offset between fit and detection position for source 18 = 0.141165 pixels
[Mon Oct 31 03:04:19 2011] 611.669400 total counts/ 96.628400 bgd. counts: snr = 52.394947
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.141165 pixels
  Position = (963.5, 438.7) = 23 26 14.27 26 33 60.0
  Extent = 4.8 (4.5-5.1)", rotation angle = 0
  Source counts = 515.0 +/- 24.7
  Background counts = 96.6
  Rate = 0.009 +/- 0.0004
[Mon Oct 31 03:04:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 03:04:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 03:04:19 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 03:04:19 2011] Source does appear to be extended
[Mon Oct 31 03:04:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 03:12:26 2011] Writing source region out to fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18_src.reg
[Mon Oct 31 03:12:26 2011] Extracting stamp from image fullrun_ccd6_acisf11830_pi14-548_cl_sm2.00.img.gz, (744, 220) - (1065, 658)
[Mon Oct 31 03:12:26 2011] Writing fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18.gif
[Mon Oct 31 03:12:28 2011] Size of ../../acisf11830/products/events/fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18_src.evt.gz[events] = 588 counts
[Mon Oct 31 03:12:28 2011] Mean chipx,y = (82.77, 413.83)
[Mon Oct 31 03:12:28 2011] Mean tdetx,y = (2957.77, 2115.83)
[Mon Oct 31 03:12:28 2011] chipx,y range = (36.00-122.00, 364.00-459.00)
[Mon Oct 31 03:12:28 2011] Size of ../../acisf11830/products/events/fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 646 counts
[Mon Oct 31 03:12:29 2011] rmf not found, will run specextract
[Mon Oct 31 03:12:29 2011] arf not found, will run specextract
[Mon Oct 31 03:12:56 2011] ../../acisf11830/products/spectra/fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18.warf not found
[Mon Oct 31 03:12:56 2011] ../../acisf11830/products/spectra/fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18.wrmf not found
[Mon Oct 31 03:12:56 2011] Removal of ../../acisf11830/products/spectra/fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18.soff failed
[Mon Oct 31 03:22:54 2011] Keeping rmf generated by specextract
[Mon Oct 31 03:22:54 2011] 167.848
[Mon Oct 31 03:31:42 2011] Updating aperture counts using extracted products
[Mon Oct 31 03:31:42 2011] Error reading totcts from fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18_src.pi.gz
[Mon Oct 31 03:31:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 03:31:42 2011] Using photon index=1.80, rate=0.00869, arf fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18.arf
[Mon Oct 31 03:31:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 03:31:42 2011] Updating source flux to 1.1e-13
[Mon Oct 31 03:32:12 2011] Reading fit data from acisf11830/analysis//spectral/fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18_pl.csv
[Mon Oct 31 03:32:12 2011] Spectral fit parameter nH value = 3.08557e+14
[Mon Oct 31 03:32:12 2011] Spectral fit parameter PhoIndex value = 1.66531
[Mon Oct 31 03:32:12 2011] Failed to get F(0.3-8.0) from acisf11830/analysis//spectral/fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18_pl.csv, possibly due to different flux energy range selected
[Mon Oct 31 03:32:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 03:32:12 2011] Using Nh = 3.1e+14, photon index=1.67, rate=0.00869, arf fullrun_ccd6_acisf11830_pi14-548_pass1_cl_src18.arf
[Mon Oct 31 03:32:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 03:32:12 2011] Updating source flux to 1.2e-13