[Mon Oct 31 13:12:32 2011] Detection parameters:
  Position = (318.2, 542.9) = 2 26 14.21 -18 54 34.6
  Extent = 0.7" x 0.5", rotation angle = 78 degrees
  Source counts = 193.6 +/- 14.0
  Background counts = 3.4
  Rate = 0.002 +/- 0.0002

[Mon Oct 31 13:12:32 2011] Off-axis axis estimate = 2.73'
[Mon Oct 31 13:13:45 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 13:13:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 13:13:45 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Mon Oct 31 13:13:45 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.906
[Mon Oct 31 13:13:45 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.53"
[Mon Oct 31 13:13:45 2011] fullrun_ccd6_acisf11829_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 31 13:13:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11829_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 13:13:45 2011] fullrun_ccd6_acisf11829_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 31 13:13:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11829_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 13:13:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11829_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11829_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 13:13:46 2011] fullrun_ccd6_acisf11829_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 13:13:46 2011] fullrun_ccd6_acisf11829_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 13:13:46 2011] Fit fullrun_ccd6_acisf11829_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 13:13:54 2011] Spatial fit model total counts = 202.000000, observed total counts = 202.000000
[Mon Oct 31 13:13:54 2011] Offset between fit and detection position for source 3 = 0.718910 pixels
[Mon Oct 31 13:13:54 2011] 201.250400 total counts/ 10.900400 bgd. counts: snr = 57.654295
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.718910 pixels
  Position = (318.7, 543.4) = 2 26 14.21 -18 54 34.5
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 190.3 +/- 14.2
  Background counts = 10.9
  Rate = 0.002 +/- 0.0002
[Mon Oct 31 13:13:54 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 13:13:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 13:13:54 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 13:13:54 2011] Source does appear to be extended
[Mon Oct 31 13:13:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 13:14:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 13:14:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 13:14:16 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Mon Oct 31 13:14:16 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.020
[Mon Oct 31 13:14:16 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.73"
[Mon Oct 31 13:14:16 2011] fullrun_ccd6_acisf11829_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 31 13:14:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11829_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 13:14:16 2011] fullrun_ccd6_acisf11829_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 31 13:14:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11829_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 13:14:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11829_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11829_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 13:14:17 2011] fullrun_ccd6_acisf11829_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 13:14:17 2011] fullrun_ccd6_acisf11829_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 13:14:17 2011] Fit fullrun_ccd6_acisf11829_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 13:14:25 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Mon Oct 31 13:14:25 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 13:14:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 13:14:25 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 13:14:25 2011] Source does appear to be extended
[Mon Oct 31 13:14:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 13:15:26 2011] Not overwriting source region fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 31 13:15:26 2011] Extracting stamp from image fullrun_ccd6_acisf11829_pi14-548_cl_sm2.00.img.gz, (285, 510) - (352, 577)
[Mon Oct 31 13:15:26 2011] Writing fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3.gif
[Mon Oct 31 13:15:27 2011] ../../acisf11829/products/events/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_src.evt and ../../acisf11829/products/events/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 31 13:15:27 2011] Size of ../../acisf11829/products/events/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_src.evt.gz[events] = 196 counts
[Mon Oct 31 13:15:27 2011] Mean chipx,y = (939.46, 645.05)
[Mon Oct 31 13:15:27 2011] Mean tdetx,y = (3814.46, 2347.05)
[Mon Oct 31 13:15:27 2011] chipx,y range = (919.00-958.00, 626.00-666.00)
[Mon Oct 31 13:15:27 2011] Size of ../../acisf11829/products/events/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 35 counts
[Mon Oct 31 13:15:27 2011] ../../acisf11829/products/images/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_src.img and ../../acisf11829/products/images/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 31 13:15:27 2011] ../../acisf11829/products/spectra/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_src.pi and ../../acisf11829/products/spectra/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 31 13:15:30 2011] ../../acisf11829/products/lightcurves/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_src.lc and ../../acisf11829/products/lightcurves/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 31 13:15:55 2011] Keeping rmf generated by specextract
[Mon Oct 31 13:15:55 2011] 206.519
[Mon Oct 31 13:17:15 2011] Updating aperture counts using extracted products
[Mon Oct 31 13:17:15 2011] Error reading totcts from fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 31 13:17:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 13:17:15 2011] Using photon index=1.80, rate=0.00238, arf fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3.arf
[Mon Oct 31 13:17:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 13:17:15 2011] Updating source flux to 2.6e-14
[Mon Oct 31 13:17:46 2011] Reading fit data from acisf11829/analysis//spectral/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_pl.csv
[Mon Oct 31 13:17:46 2011] Spectral fit parameter nH value = 1.24577e+15
[Mon Oct 31 13:17:46 2011] Spectral fit parameter PhoIndex value = 1.5183
[Mon Oct 31 13:17:46 2011] Failed to get F(0.3-8.0) from acisf11829/analysis//spectral/fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Oct 31 13:17:46 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 13:17:46 2011] Using Nh = 1.2e+15, photon index=1.52, rate=0.00238, arf fullrun_ccd6_acisf11829_pi14-548_pass1_cl_src3.arf
[Mon Oct 31 13:17:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 13:17:46 2011] Updating source flux to 2.8e-14