[Wed Sep 28 17:39:11 2011] Detection parameters:
  Position = (672.8, 1063.3) = 2 26 13.31 -18 59 13.7
  Extent = 0.6" x 0.5", rotation angle = 168 degrees
  Source counts = 17.2 +/- 4.2
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0001

[Wed Sep 28 17:39:11 2011] Off-axis axis estimate = 2.48'
[Wed Sep 28 17:39:55 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:39:55 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Wed Sep 28 17:39:55 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.009
[Wed Sep 28 17:39:55 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.49"
[Wed Sep 28 17:39:55 2011] fullrun_ccd6_acisf11828_pi14-548_cl_pass0_src5.ximg exists
[Wed Sep 28 17:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11828_pi14-548_cl_pass0_src5.csv
[Wed Sep 28 17:39:55 2011] fullrun_ccd6_acisf11828_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Sep 28 17:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11828_pi14-548_cl_pass0_src5.csv
[Wed Sep 28 17:39:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11828_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11828_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:39:56 2011] fullrun_ccd6_acisf11828_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Sep 28 17:39:56 2011] fullrun_ccd6_acisf11828_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Sep 28 17:39:56 2011] Fit fullrun_ccd6_acisf11828_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Sep 28 17:40:02 2011] Spatial fit model total counts = 18.671700, observed total counts = 18.000000
[Wed Sep 28 17:40:02 2011] Offset between fit and detection position for source 2 = 0.682336 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.682336 pixels
  Position = (673.2, 1063.9) = 2 26 13.32 -18 59 13.7
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 18.7 +/- 4.3
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 17:40:02 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:40:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:40:02 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:40:02 2011] Source does appear to be extended
[Wed Sep 28 17:40:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:40:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:40:17 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Wed Sep 28 17:40:17 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.036
[Wed Sep 28 17:40:17 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.72"
[Wed Sep 28 17:40:18 2011] fullrun_ccd6_acisf11828_pi14-548_cl_pass1_src5.ximg exists
[Wed Sep 28 17:40:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11828_pi14-548_cl_pass1_src5.csv
[Wed Sep 28 17:40:18 2011] fullrun_ccd6_acisf11828_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Sep 28 17:40:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11828_pi14-548_cl_pass1_src5.csv
[Wed Sep 28 17:40:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11828_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11828_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:40:18 2011] fullrun_ccd6_acisf11828_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Sep 28 17:40:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11828_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Sep 28 17:40:18 2011] fullrun_ccd6_acisf11828_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Sep 28 17:40:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11828_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Sep 28 17:40:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11828_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11828_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:40:24 2011] Spatial fit model total counts = 17.081600, observed total counts = 19.000000
[Wed Sep 28 17:40:24 2011] Offset between fit and detection position for source 2 = 0.142573 pixels
[Wed Sep 28 17:40:24 2011] 17.388700 total counts/ 0.000000 bgd. counts: snr = 160156056640329.000000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.142573 pixels
  Position = (673.3, 1063.8) = 2 26 13.31 -18 59 13.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 17.4 +/- 4.2
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 17:40:24 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:40:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:40:24 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:40:24 2011] Source does appear to be extended
[Wed Sep 28 17:40:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:40:53 2011] Not overwriting source region fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 17:40:53 2011] Extracting stamp from image fullrun_ccd6_acisf11828_pi14-548_cl_sm2.00.img.gz, (640, 1031) - (706, 1097)
[Wed Sep 28 17:40:53 2011] Writing fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 17:41:06 2011] ../../acisf11828/products/events/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_src.evt and ../../acisf11828/products/events/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 17:41:06 2011] Size of ../../acisf11828/products/events/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_src.evt.gz[events] = 18 counts
[Wed Sep 28 17:41:06 2011] Mean chipx,y = (986.44, 669.72)
[Wed Sep 28 17:41:06 2011] Mean tdetx,y = (3861.44, 2371.72)
[Wed Sep 28 17:41:06 2011] chipx,y range = (969.00-999.00, 650.00-685.00)
[Wed Sep 28 17:41:06 2011] Size of ../../acisf11828/products/events/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 11 counts
[Wed Sep 28 17:41:06 2011] ../../acisf11828/products/images/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_src.img and ../../acisf11828/products/images/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 17:41:06 2011] ../../acisf11828/products/spectra/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_src.pi and ../../acisf11828/products/spectra/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 28 17:41:06 2011] Not generating rmf since there are only 17 counts
[Wed Sep 28 17:41:09 2011] ../../acisf11828/products/lightcurves/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_src.lc and ../../acisf11828/products/lightcurves/fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 17:41:24 2011] 207.809
[Wed Sep 28 17:42:23 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:42:23 2011] Error reading totcts from fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 17:42:23 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:42:23 2011] Using photon index=1.80, rate=0.00046, arf fullrun_ccd6_acisf11828_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 17:42:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:42:23 2011] Updating source flux to 4.9e-15
[Wed Sep 28 17:42:32 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting