[Mon Sep 26 10:41:06 2011] Detection parameters:
  Position = (456.6, 466.3) = 11 42 59.93 50 54 44.2
  Extent = 1.0" x 0.6", rotation angle = 81 degrees
  Source counts = 20.5 +/- 4.8
  Background counts = 2.5
  Rate = 0.001 +/- 0.0002

[Mon Sep 26 10:41:07 2011] Off-axis axis estimate = 4.32'
[Mon Sep 26 10:41:51 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 10:41:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 10:41:51 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Mon Sep 26 10:41:51 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.089
[Mon Sep 26 10:41:51 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.93"
[Mon Sep 26 10:41:51 2011] fullrun_ccd7_acisf11827_pi14-548_cl_pass0_src5.ximg exists
[Mon Sep 26 10:41:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11827_pi14-548_cl_pass0_src5.csv
[Mon Sep 26 10:41:52 2011] fullrun_ccd7_acisf11827_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Sep 26 10:41:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11827_pi14-548_cl_pass0_src5.csv
[Mon Sep 26 10:41:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11827_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11827_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 10:41:52 2011] fullrun_ccd7_acisf11827_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Sep 26 10:41:52 2011] fullrun_ccd7_acisf11827_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Sep 26 10:41:52 2011] Fit fullrun_ccd7_acisf11827_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Sep 26 10:41:58 2011] Spatial fit model total counts = 25.146800, observed total counts = 26.000000
[Mon Sep 26 10:41:58 2011] Offset between fit and detection position for source 4 = 1.275540 pixels
[Mon Sep 26 10:41:58 2011] 25.190560 total counts/ 7.011260 bgd. counts: snr = 6.865610
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.275540 pixels
  Position = (457.0, 467.5) = 11 42 59.93 50 54 44.5
  Extent = 0.9 (0.6-1.6)", rotation angle = 0
  Source counts = 18.2 +/- 5.0
  Background counts = 7.0
  Rate = 0.0009 +/- 0.0003
[Mon Sep 26 10:41:58 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 10:41:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 10:41:58 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 10:41:58 2011] Source does appear to be extended
[Mon Sep 26 10:41:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 10:42:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 10:42:16 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Mon Sep 26 10:42:16 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.929
[Mon Sep 26 10:42:16 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.90"
[Mon Sep 26 10:42:16 2011] fullrun_ccd7_acisf11827_pi14-548_cl_pass1_src5.ximg exists
[Mon Sep 26 10:42:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11827_pi14-548_cl_pass1_src5.csv
[Mon Sep 26 10:42:17 2011] fullrun_ccd7_acisf11827_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Sep 26 10:42:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11827_pi14-548_cl_pass1_src5.csv
[Mon Sep 26 10:42:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11827_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11827_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 10:42:18 2011] fullrun_ccd7_acisf11827_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Sep 26 10:42:18 2011] fullrun_ccd7_acisf11827_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Sep 26 10:42:18 2011] Fit fullrun_ccd7_acisf11827_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Sep 26 10:42:24 2011] Spatial fit model total counts = 25.652100, observed total counts = 26.000000
[Mon Sep 26 10:42:24 2011] Offset between fit and detection position for source 4 = 0.073468 pixels
[Mon Sep 26 10:42:24 2011] 25.411010 total counts/ 7.021510 bgd. counts: snr = 6.939923
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.073468 pixels
  Position = (457.1, 467.6) = 11 42 59.93 50 54 44.5
  Extent = 0.9 (0.6-1.5)", rotation angle = 0
  Source counts = 18.4 +/- 5.0
  Background counts = 7.0
  Rate = 0.0009 +/- 0.0003
[Mon Sep 26 10:42:24 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 10:42:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 10:42:24 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 10:42:24 2011] Source does appear to be extended
[Mon Sep 26 10:42:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 10:43:40 2011] Not overwriting source region fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_src.reg
[Mon Sep 26 10:43:40 2011] Extracting stamp from image fullrun_ccd7_acisf11827_pi14-548_cl_sm2.00.img.gz, (416, 427) - (498, 508)
[Mon Sep 26 10:43:40 2011] Writing fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4.gif
[Mon Sep 26 10:43:52 2011] ../../acisf11827/products/events/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_src.evt and ../../acisf11827/products/events/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon Sep 26 10:43:52 2011] Size of ../../acisf11827/products/events/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_src.evt.gz[events] = 25 counts
[Mon Sep 26 10:43:52 2011] Mean chipx,y = (572.56, 867.44)
[Mon Sep 26 10:43:52 2011] Mean tdetx,y = (4489.56, 2569.44)
[Mon Sep 26 10:43:52 2011] chipx,y range = (555.00-587.00, 848.00-887.00)
[Mon Sep 26 10:43:52 2011] Size of ../../acisf11827/products/events/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 36 counts
[Mon Sep 26 10:43:52 2011] ../../acisf11827/products/images/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_src.img and ../../acisf11827/products/images/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon Sep 26 10:43:52 2011] ../../acisf11827/products/spectra/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_src.pi and ../../acisf11827/products/spectra/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon Sep 26 10:43:52 2011] Not generating rmf since there are only 18 counts
[Mon Sep 26 10:43:55 2011] ../../acisf11827/products/lightcurves/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_src.lc and ../../acisf11827/products/lightcurves/fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon Sep 26 10:44:27 2011] 218.231
[Mon Sep 26 10:44:30 2011] Updating aperture counts using extracted products
[Mon Sep 26 10:44:30 2011] Error reading totcts from fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Sep 26 10:44:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 10:44:30 2011] Using photon index=1.80, rate=0.000921, arf fullrun_ccd7_acisf11827_pi14-548_pass1_cl_src4.arf
[Mon Sep 26 10:44:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 10:44:30 2011] Updating source flux to 7.5e-15
[Mon Sep 26 10:44:44 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting