[Mon Sep 26 10:41:03 2011] Detection parameters:
  Position = (1216.0, 847.6) = 11 43 12.27 50 50 16.1
  Extent = 1.4" x 0.9", rotation angle = 44 degrees
  Source counts = 191.1 +/- 14.6
  Background counts = 21.9
  Rate = 0.01 +/- 0.0007

[Mon Sep 26 10:41:03 2011] Off-axis axis estimate = 9.13'
[Mon Sep 26 10:41:49 2011] Using EEF radius (= 3.69 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 10:41:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 10:41:49 2011] Initial guess for spatial extent in simple fitting = 3.69"
[Mon Sep 26 10:41:49 2011] source mask rpix=7.5, npix_max = 255, mask sum = 254, frac = 0.994
[Mon Sep 26 10:41:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.69"
[Mon Sep 26 10:41:49 2011] fullrun_ccd3_acisf11827_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 10:41:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11827_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 10:41:49 2011] fullrun_ccd3_acisf11827_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 10:41:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11827_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 10:41:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11827_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11827_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 10:41:49 2011] fullrun_ccd3_acisf11827_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 10:41:49 2011] fullrun_ccd3_acisf11827_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 10:41:49 2011] Fit fullrun_ccd3_acisf11827_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 10:41:55 2011] Spatial fit model total counts = 234.207000, observed total counts = 240.000000
[Mon Sep 26 10:41:55 2011] Offset between fit and detection position for source 5 = 0.951410 pixels
[Mon Sep 26 10:41:55 2011] 233.815700 total counts/ 38.148700 bgd. counts: snr = 31.679456
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.951410 pixels
  Position = (1215.1, 847.9) = 11 43 12.34 50 50 16.0
  Extent = 2.6 (2.3-3.1)", rotation angle = 0
  Source counts = 195.7 +/- 15.3
  Background counts = 38.1
  Rate = 0.01 +/- 0.0008
[Mon Sep 26 10:41:55 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 10:41:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 10:41:55 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 10:41:55 2011] Source does appear to be extended
[Mon Sep 26 10:41:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 10:42:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 10:42:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 10:42:13 2011] Initial guess for spatial extent in simple fitting = 2.62"
[Mon Sep 26 10:42:13 2011] source mask rpix=5.3, npix_max = 136, mask sum = 144, frac = 1.057
[Mon Sep 26 10:42:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.62"
[Mon Sep 26 10:42:14 2011] fullrun_ccd3_acisf11827_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 10:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11827_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 10:42:14 2011] fullrun_ccd3_acisf11827_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 10:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11827_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 10:42:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11827_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11827_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 10:42:14 2011] fullrun_ccd3_acisf11827_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 10:42:14 2011] fullrun_ccd3_acisf11827_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 10:42:14 2011] Fit fullrun_ccd3_acisf11827_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 10:42:21 2011] Spatial fit model total counts = 224.323000, observed total counts = 231.000000
[Mon Sep 26 10:42:21 2011] Offset between fit and detection position for source 5 = 0.465216 pixels
[Mon Sep 26 10:42:21 2011] 223.991000 total counts/ 51.061000 bgd. counts: snr = 24.200575
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.465216 pixels
  Position = (1215.5, 848.0) = 11 43 12.31 50 50 16.0
  Extent = 2.3 (1.9-2.7)", rotation angle = 0
  Source counts = 172.9 +/- 15.0
  Background counts = 51.1
  Rate = 0.009 +/- 0.0007
[Mon Sep 26 10:42:21 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 10:42:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 10:42:21 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 10:42:21 2011] Source does appear to be extended
[Mon Sep 26 10:42:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 10:42:49 2011] Not overwriting source region fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_src.reg
[Mon Sep 26 10:42:49 2011] Extracting stamp from image fullrun_ccd3_acisf11827_pi14-548_cl_sm2.00.img.gz, (1112, 744) - (1319, 952)
[Mon Sep 26 10:42:49 2011] Writing fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5.gif
[Mon Sep 26 10:42:50 2011] ../../acisf11827/products/events/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_src.evt and ../../acisf11827/products/events/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Sep 26 10:42:50 2011] Size of ../../acisf11827/products/events/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_src.evt.gz[events] = 216 counts
[Mon Sep 26 10:42:50 2011] Mean chipx,y = (16.55, 326.46)
[Mon Sep 26 10:42:50 2011] Mean tdetx,y = (4805.54, 3077.55)
[Mon Sep 26 10:42:50 2011] chipx,y range = (2.00-40.00, 295.00-353.00)
[Mon Sep 26 10:42:50 2011] Size of ../../acisf11827/products/events/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 53 counts
[Mon Sep 26 10:42:50 2011] ../../acisf11827/products/images/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_src.img and ../../acisf11827/products/images/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Sep 26 10:42:50 2011] ../../acisf11827/products/spectra/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_src.pi and ../../acisf11827/products/spectra/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Sep 26 10:42:53 2011] ../../acisf11827/products/lightcurves/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_src.lc and ../../acisf11827/products/lightcurves/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Sep 26 10:43:03 2011] Keeping rmf generated by specextract
[Mon Sep 26 10:43:03 2011] 118.069
[Mon Sep 26 10:44:29 2011] Updating aperture counts using extracted products
[Mon Sep 26 10:44:29 2011] Error reading totcts from fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Sep 26 10:44:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 10:44:29 2011] Using photon index=1.80, rate=0.00866, arf fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5.arf
[Mon Sep 26 10:44:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 10:44:29 2011] Updating source flux to 1.8e-13
[Mon Sep 26 10:44:37 2011] Reading fit data from acisf11827/analysis//spectral/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_pl.csv
[Mon Sep 26 10:44:37 2011] Spectral fit parameter nH value = 2.1468e+21
[Mon Sep 26 10:44:37 2011] Spectral fit parameter PhoIndex value = 2.42833
[Mon Sep 26 10:44:37 2011] Failed to get F(0.3-8.0) from acisf11827/analysis//spectral/fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 10:44:37 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 10:44:37 2011] Using Nh = 2.1e+21, photon index=2.43, rate=0.00866, arf fullrun_ccd3_acisf11827_pi14-548_pass1_cl_src5.arf
[Mon Sep 26 10:44:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 10:44:37 2011] Updating source flux to 1.4e-13