[Thu Oct  6 20:23:38 2011] Detection parameters:
  Position = (432.2, 317.3) = 16 17 25.18 -50 59 15.3
  Extent = 0.5" x 0.5", rotation angle = 152 degrees
  Source counts = 35.7 +/- 8.4
  Background counts = 34.3
  Rate = 0.0006 +/- 0.0001

[Thu Oct  6 20:23:43 2011] Off-axis axis estimate = 3.07'
[Thu Oct  6 20:30:53 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:30:53 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Thu Oct  6 20:30:53 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.771
[Thu Oct  6 20:30:53 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 0.59"
[Thu Oct  6 20:30:57 2011] fullrun_ccd3_acisf11823_pi14-548_cl_pass0_src51.ximg exists
[Thu Oct  6 20:30:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11823_pi14-548_cl_pass0_src51.csv
[Thu Oct  6 20:30:57 2011] fullrun_ccd3_acisf11823_pi14-548_cl_pass0_src51_1.ximg exists
[Thu Oct  6 20:30:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11823_pi14-548_cl_pass0_src51.csv
[Thu Oct  6 20:30:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11823_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11823_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:31:00 2011] fullrun_ccd3_acisf11823_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Thu Oct  6 20:31:00 2011] fullrun_ccd3_acisf11823_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Thu Oct  6 20:31:00 2011] Fit fullrun_ccd3_acisf11823_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Thu Oct  6 20:32:05 2011] Source 50 is offset by 1.761717 and -4.170851 pixels which is larger than
2 X fitted extent = 0.895000 x 0.895000, not incorporating fit results
[Thu Oct  6 20:32:05 2011] Spatial fit model total counts = 569.680000, observed total counts = 582.000000
[Thu Oct  6 20:32:05 2011] Offset between fit and detection position for source 50 = 0.561847 pixels
[Thu Oct  6 20:32:05 2011] Warning, changing simple spatial fit ID from 51 to 86
[Thu Oct  6 20:32:05 2011] 576.301040 total counts/ 566.608000 bgd. counts: snr = 0.407210
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.561847 pixels
  Position = (431.8, 317.7) = 16 17 25.23 -50 59 15.4
  Extent = 0.3 (0.1-0.6)", rotation angle = 0
  Source counts = 9.7 +/- 24.0
  Background counts = 566.6
  Rate = 0.0002 +/- 0.0004
  Deleting source due to low Poisson probability