[Thu Oct  6 20:23:34 2011] Detection parameters:
  Position = (1105.3, 312.2) = 16 17 43.78 -51 0 27.7
  Extent = 0.5" x 0.5", rotation angle = 125 degrees
  Source counts = 12.9 +/- 6.2
  Background counts = 25.1
  Rate = 0.0002 +/- 0.0001

[Thu Oct  6 20:23:35 2011] Off-axis axis estimate = 0.84'
[Thu Oct  6 20:30:42 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:30:42 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Oct  6 20:30:42 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.384
[Thu Oct  6 20:30:42 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 0.38"
[Thu Oct  6 20:30:50 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src47.ximg exists
[Thu Oct  6 20:30:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src47.csv
[Thu Oct  6 20:30:50 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src47_1.ximg exists
[Thu Oct  6 20:30:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src47.csv
[Thu Oct  6 20:30:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:30:51 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Thu Oct  6 20:30:51 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Thu Oct  6 20:30:51 2011] Fit fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Thu Oct  6 20:31:53 2011] Spatial fit model total counts = 219.078000, observed total counts = 222.000000
[Thu Oct  6 20:31:53 2011] Offset between fit and detection position for source 62 = 0.668093 pixels
[Thu Oct  6 20:31:53 2011] 217.615300 total counts/ 206.672000 bgd. counts: snr = 0.761215
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.668093 pixels
  Position = (1105.9, 312.0) = 16 17 43.77 -51 0 28.1
  Extent = 0.5 (0.1-1.3)", rotation angle = 0
  Source counts = 10.9 +/- 14.8
  Background counts = 206.7
  Rate = 0.0002 +/- 0.0002
  Deleting source due to low Poisson probability