[Thu Oct  6 20:23:31 2011] Detection parameters:
  Position = (593.6, 109.2) = 16 18 10.47 -51 2 7.4
  Extent = 0.9" x 0.5", rotation angle = 34 degrees
  Source counts = 10.3 +/- 3.9
  Background counts = 4.7
  Rate = 0.0002 +/- 6e-05

[Thu Oct  6 20:23:35 2011] Off-axis axis estimate = 4.80'
[Thu Oct  6 20:30:42 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:30:42 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Thu Oct  6 20:30:42 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.001
[Thu Oct  6 20:30:42 2011] Giving source the simple spatial ID 54 for pass 0, mean size = 1.10"
[Thu Oct  6 20:30:50 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src54.ximg exists
[Thu Oct  6 20:30:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src54.csv
[Thu Oct  6 20:30:50 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src54_1.ximg exists
[Thu Oct  6 20:30:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src54.csv
[Thu Oct  6 20:30:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:30:53 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src54.ximg exists
[Thu Oct  6 20:30:53 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src54_1.ximg exists
[Thu Oct  6 20:30:53 2011] Fit fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src54 appears to have run properly
[Thu Oct  6 20:31:53 2011] Spatial fit model total counts = 32.265700, observed total counts = 33.000000
[Thu Oct  6 20:31:53 2011] Offset between fit and detection position for source 35 = 2.641674 pixels
[Thu Oct  6 20:31:53 2011] 31.025520 total counts/ 1.496820 bgd. counts: snr = 24.135680
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 2.641674 pixels
  Position = (593.9, 111.9) = 16 18 10.48 -51 2 6.3
  Extent = 1.3 (0.9-1.8)", rotation angle = 0
  Source counts = 29.5 +/- 5.6
  Background counts = 1.5
  Rate = 0.0005 +/- 9e-05
[Thu Oct  6 20:31:53 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 20:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 20:31:53 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 20:31:53 2011] Source does appear to be extended
[Thu Oct  6 20:31:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 20:33:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:33:01 2011] Initial guess for spatial extent in simple fitting = 1.33"
[Thu Oct  6 20:33:01 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.876
[Thu Oct  6 20:33:01 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 1.33"
[Thu Oct  6 20:33:02 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src28.ximg exists
[Thu Oct  6 20:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src28.csv
[Thu Oct  6 20:33:02 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src28_1.ximg exists
[Thu Oct  6 20:33:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src28.csv
[Thu Oct  6 20:33:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:33:02 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Thu Oct  6 20:33:03 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Oct  6 20:33:03 2011] Fit fullrun_ccd2_acisf11823_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Thu Oct  6 20:33:54 2011] Spatial fit model total counts = 29.048700, observed total counts = 30.000000
[Thu Oct  6 20:33:54 2011] Offset between fit and detection position for source 35 = 0.254165 pixels
[Thu Oct  6 20:33:54 2011] 28.325738 total counts/ 0.000138 bgd. counts: snr = 2410.903286
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.254165 pixels
  Position = (593.8, 111.6) = 16 18 10.49 -51 2 6.5
  Extent = 1.3 (1.0-1.5)", rotation angle = 0
  Source counts = 28.3 +/- 5.3
  Background counts = 0.0
  Rate = 0.0005 +/- 9e-05
[Thu Oct  6 20:33:54 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 20:33:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 20:33:54 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 20:33:54 2011] Source does appear to be extended
[Thu Oct  6 20:33:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 20:44:18 2011] Not overwriting source region fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_src.reg
[Thu Oct  6 20:44:18 2011] Extracting stamp from image fullrun_ccd2_acisf11823_pi14-548_cl_sm2.00.img.gz, (536, 54) - (652, 170)
[Thu Oct  6 20:44:18 2011] Writing fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35.gif
[Thu Oct  6 20:45:43 2011] ../../acisf11823/products/events/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_src.evt and ../../acisf11823/products/events/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Thu Oct  6 20:45:43 2011] Size of ../../acisf11823/products/events/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_src.evt.gz[events] = 37 counts
[Thu Oct  6 20:45:43 2011] Mean chipx,y = (42.00, 455.81)
[Thu Oct  6 20:45:43 2011] Mean tdetx,y = (3516.81, 4044.00)
[Thu Oct  6 20:45:43 2011] chipx,y range = (17.00-60.00, 437.00-477.00)
[Thu Oct  6 20:45:43 2011] Size of ../../acisf11823/products/events/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 366 counts
[Thu Oct  6 20:45:43 2011] ../../acisf11823/products/images/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_src.img and ../../acisf11823/products/images/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Thu Oct  6 20:45:43 2011] ../../acisf11823/products/spectra/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_src.pi and ../../acisf11823/products/spectra/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Thu Oct  6 20:45:43 2011] Not generating rmf since there are only 28 counts
[Thu Oct  6 20:45:46 2011] ../../acisf11823/products/lightcurves/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_src.lc and ../../acisf11823/products/lightcurves/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Thu Oct  6 20:45:53 2011] 179.003
[Thu Oct  6 20:48:50 2011] Updating aperture counts using extracted products
[Thu Oct  6 20:48:50 2011] Error reading totcts from fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35_src.pi.gz
[Thu Oct  6 20:48:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 20:48:51 2011] Using photon index=1.80, rate=0.000453, arf fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src35.arf
[Thu Oct  6 20:48:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 20:48:51 2011] Updating source flux to 9.1e-15
[Thu Oct  6 20:59:27 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting