[Thu Oct  6 20:23:31 2011] Detection parameters:
  Position = (1131.7, 221.9) = 16 17 42.40 -51 1 12.2
  Extent = 0.5" x 0.5", rotation angle = 141 degrees
  Source counts = 50.8 +/- 8.4
  Background counts = 20.2
  Rate = 0.0008 +/- 0.0001

[Thu Oct  6 20:23:35 2011] Off-axis axis estimate = 0.29'
[Thu Oct  6 20:30:42 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:30:42 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Oct  6 20:30:42 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.856
[Thu Oct  6 20:30:42 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.41"
[Thu Oct  6 20:30:49 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src12.ximg exists
[Thu Oct  6 20:30:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src12.csv
[Thu Oct  6 20:30:49 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Oct  6 20:30:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src12.csv
[Thu Oct  6 20:30:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11823_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:30:50 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Oct  6 20:30:50 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Oct  6 20:30:50 2011] Fit fullrun_ccd2_acisf11823_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Oct  6 20:31:53 2011] Spatial fit model total counts = 127.000000, observed total counts = 127.000000
[Thu Oct  6 20:31:53 2011] Offset between fit and detection position for source 30 = 0.695598 pixels
[Thu Oct  6 20:31:53 2011] 125.109000 total counts/ 66.669700 bgd. counts: snr = 7.157160
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.695598 pixels
  Position = (1132.2, 222.3) = 16 17 42.40 -51 1 12.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 58.4 +/- 11.2
  Background counts = 66.7
  Rate = 0.0009 +/- 0.0002
[Thu Oct  6 20:31:53 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 20:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 20:31:53 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 20:31:53 2011] Source does appear to be extended
[Thu Oct  6 20:31:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 20:33:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:33:01 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Thu Oct  6 20:33:01 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.101
[Thu Oct  6 20:33:01 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.46"
[Thu Oct  6 20:33:02 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src12.ximg exists
[Thu Oct  6 20:33:02 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src12.csv
[Thu Oct  6 20:33:02 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Oct  6 20:33:02 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src12.csv
[Thu Oct  6 20:33:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11823_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:33:02 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Oct  6 20:33:02 2011] fullrun_ccd2_acisf11823_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Oct  6 20:33:02 2011] Fit fullrun_ccd2_acisf11823_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Oct  6 20:33:54 2011] Spatial fit model total counts = 127.000000, observed total counts = 127.000000
[Thu Oct  6 20:33:54 2011] Offset between fit and detection position for source 30 = 0.000008 pixels
[Thu Oct  6 20:33:54 2011] 125.109000 total counts/ 66.668900 bgd. counts: snr = 7.157301
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.000008 pixels
  Position = (1132.2, 222.3) = 16 17 42.40 -51 1 12.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 58.4 +/- 11.2
  Background counts = 66.7
  Rate = 0.0009 +/- 0.0002
[Thu Oct  6 20:33:54 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 20:33:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 20:33:54 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 20:33:54 2011] Source does appear to be extended
[Thu Oct  6 20:33:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 20:44:18 2011] Not overwriting source region fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_src.reg
[Thu Oct  6 20:44:18 2011] Extracting stamp from image fullrun_ccd2_acisf11823_pi14-548_cl_sm2.00.img.gz, (1111, 201) - (1153, 243)
[Thu Oct  6 20:44:18 2011] Writing fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30.gif
[Thu Oct  6 20:44:55 2011] ../../acisf11823/products/events/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_src.evt and ../../acisf11823/products/events/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Thu Oct  6 20:44:55 2011] Size of ../../acisf11823/products/events/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_src.evt.gz[events] = 70 counts
[Thu Oct  6 20:44:55 2011] Mean chipx,y = (71.60, 1006.39)
[Thu Oct  6 20:44:55 2011] Mean tdetx,y = (4067.39, 4014.40)
[Thu Oct  6 20:44:55 2011] chipx,y range = (53.00-90.00, 986.00-1023.00)
[Thu Oct  6 20:44:55 2011] Size of ../../acisf11823/products/events/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 139 counts
[Thu Oct  6 20:44:55 2011] ../../acisf11823/products/images/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_src.img and ../../acisf11823/products/images/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Thu Oct  6 20:44:55 2011] ../../acisf11823/products/spectra/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_src.pi and ../../acisf11823/products/spectra/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Thu Oct  6 20:44:55 2011] Not generating rmf since there are only 58 counts
[Thu Oct  6 20:44:59 2011] ../../acisf11823/products/lightcurves/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_src.lc and ../../acisf11823/products/lightcurves/fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Thu Oct  6 20:45:52 2011] 180.981
[Thu Oct  6 20:48:50 2011] Updating aperture counts using extracted products
[Thu Oct  6 20:48:50 2011] Error reading totcts from fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30_src.pi.gz
[Thu Oct  6 20:48:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 20:48:51 2011] Using photon index=1.80, rate=0.000935, arf fullrun_ccd2_acisf11823_pi14-548_pass1_cl_src30.arf
[Thu Oct  6 20:48:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 20:48:51 2011] Updating source flux to 1.9e-14
[Thu Oct  6 20:59:27 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting