[Thu Oct  6 20:23:05 2011] Detection parameters:
  Position = (309.1, 865.8) = 16 17 24.33 -51 3 12.2
  Extent = 0.7" x 0.7", rotation angle = 140 degrees
  Source counts = 97.8 +/- 15.4
  Background counts = 139.2
  Rate = 0.002 +/- 0.0002

[Thu Oct  6 20:23:24 2011] Off-axis axis estimate = 3.29'
[Thu Oct  6 20:30:35 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:30:35 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Thu Oct  6 20:30:35 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.227
[Thu Oct  6 20:30:35 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 0.64"
[Thu Oct  6 20:30:38 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src35.ximg exists
[Thu Oct  6 20:30:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src35.csv
[Thu Oct  6 20:30:38 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src35_1.ximg exists
[Thu Oct  6 20:30:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src35.csv
[Thu Oct  6 20:30:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:30:40 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Thu Oct  6 20:30:40 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Oct  6 20:30:40 2011] Fit fullrun_ccd1_acisf11823_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Thu Oct  6 20:31:45 2011] Spatial fit model total counts = 580.661000, observed total counts = 574.000000
[Thu Oct  6 20:31:45 2011] Offset between fit and detection position for source 83 = 2.146523 pixels
[Thu Oct  6 20:31:45 2011] 574.831900 total counts/ 481.650000 bgd. counts: snr = 4.245861
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 2.146523 pixels
  Position = (307.2, 866.9) = 16 17 24.45 -51 3 11.9
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 93.2 +/- 24.0
  Background counts = 481.6
  Rate = 0.001 +/- 0.0004
[Thu Oct  6 20:31:45 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 20:31:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 20:31:45 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 20:31:45 2011] Source does appear to be extended
[Thu Oct  6 20:31:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 20:32:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:32:52 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Thu Oct  6 20:32:52 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Thu Oct  6 20:32:52 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 1.50"
[Thu Oct  6 20:32:54 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass1_src34.ximg exists
[Thu Oct  6 20:32:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11823_pi14-548_cl_pass1_src34.csv
[Thu Oct  6 20:32:54 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass1_src34_1.ximg exists
[Thu Oct  6 20:32:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11823_pi14-548_cl_pass1_src34.csv
[Thu Oct  6 20:32:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11823_pi14-548_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11823_pi14-548_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:32:59 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass1_tfrozen_src34.ximg exists
[Thu Oct  6 20:32:59 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass1_tfrozen_src34_1.ximg exists
[Thu Oct  6 20:32:59 2011] Fit fullrun_ccd1_acisf11823_pi14-548_cl_pass1_tfrozen_src34 appears to have run properly
[Thu Oct  6 20:33:50 2011] Spatial fit model total counts = 785.741000, observed total counts = 777.000000
[Thu Oct  6 20:33:50 2011] Offset between fit and detection position for source 83 = 4.246632 pixels
[Thu Oct  6 20:33:50 2011] 786.056000 total counts/ 347.116000 bgd. counts: snr = 23.559596
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 4.246632 pixels
  Position = (303.0, 866.5) = 16 17 24.67 -51 3 12.1
  Extent = 3.0 (3.0-6.0)", rotation angle = 0
  Source counts = 438.9 +/- 28.0
  Background counts = 347.1
  Rate = 0.007 +/- 0.0004
[Thu Oct  6 20:33:50 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 20:33:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 20:33:50 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 20:33:50 2011] Source does appear to be extended
[Thu Oct  6 20:33:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 20:39:17 2011] Not overwriting source region fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_src.reg
[Thu Oct  6 20:39:17 2011] Extracting stamp from image fullrun_ccd1_acisf11823_pi14-548_cl_sm2.00.img.gz, (166, 729) - (440, 1004)
[Thu Oct  6 20:39:17 2011] Writing fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83.gif
[Thu Oct  6 20:41:19 2011] ../../acisf11823/products/events/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_src.evt and ../../acisf11823/products/events/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_bgd.evt exist, delete to re-create
[Thu Oct  6 20:41:19 2011] Size of ../../acisf11823/products/events/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_src.evt.gz[events] = 3302 counts
[Thu Oct  6 20:41:19 2011] Mean chipx,y = (199.48, 764.12)
[Thu Oct  6 20:41:19 2011] Mean tdetx,y = (4367.88, 4306.48)
[Thu Oct  6 20:41:19 2011] chipx,y range = (155.00-238.00, 717.00-805.00)
[Thu Oct  6 20:41:19 2011] Size of ../../acisf11823/products/events/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_bgd.evt.gz[events] = 25993 counts
[Thu Oct  6 20:41:19 2011] ../../acisf11823/products/images/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_src.img and ../../acisf11823/products/images/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_bgd.img exist, delete to re-create
[Thu Oct  6 20:41:19 2011] ../../acisf11823/products/spectra/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_src.pi and ../../acisf11823/products/spectra/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_bgd.pi exist, delete to re-create
[Thu Oct  6 20:41:22 2011] ../../acisf11823/products/lightcurves/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_src.lc and ../../acisf11823/products/lightcurves/fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_bgd.lc exist, delete to re-create
[Thu Oct  6 20:44:14 2011] Keeping rmf generated by specextract
[Thu Oct  6 20:44:14 2011] 195.907
[Thu Oct  6 20:48:47 2011] Updating aperture counts using extracted products
[Thu Oct  6 20:48:47 2011] Error reading totcts from fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83_src.pi.gz
[Thu Oct  6 20:48:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 20:48:49 2011] Using photon index=1.80, rate=0.00703, arf fullrun_ccd1_acisf11823_pi14-548_pass1_cl_src83.arf
[Thu Oct  6 20:48:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 20:48:49 2011] Updating source flux to 1.3e-13