[Thu Oct  6 20:23:18 2011] Detection parameters:
  Position = (422.8, 730.5) = 16 17 18.39 -51 4 18.7
  Extent = 0.9" x 0.8", rotation angle = 82 degrees
  Source counts = 51.9 +/- 11.9
  Background counts = 89.1
  Rate = 0.0008 +/- 0.0002

[Thu Oct  6 20:23:24 2011] Off-axis axis estimate = 4.72'
[Thu Oct  6 20:30:35 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:30:35 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Thu Oct  6 20:30:35 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.871
[Thu Oct  6 20:30:35 2011] Giving source the simple spatial ID 75 for pass 0, mean size = 1.07"
[Thu Oct  6 20:30:39 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src75.ximg exists
[Thu Oct  6 20:30:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src75.csv
[Thu Oct  6 20:30:39 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src75_1.ximg exists
[Thu Oct  6 20:30:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src75.csv
[Thu Oct  6 20:30:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11823_pi14-548_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:30:41 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass0_tfrozen_src75.ximg exists
[Thu Oct  6 20:30:41 2011] fullrun_ccd1_acisf11823_pi14-548_cl_pass0_tfrozen_src75_1.ximg exists
[Thu Oct  6 20:30:41 2011] Fit fullrun_ccd1_acisf11823_pi14-548_cl_pass0_tfrozen_src75 appears to have run properly
[Thu Oct  6 20:31:45 2011] Spatial fit model total counts = 417.998000, observed total counts = 418.000000
[Thu Oct  6 20:31:45 2011] Offset between fit and detection position for source 170 = 0.400907 pixels
[Thu Oct  6 20:31:45 2011] 423.394400 total counts/ 396.078000 bgd. counts: snr = 1.372566
Spatial fit parameters:
  Offset between fit and detection position for source 170 = 0.400907 pixels
  Position = (422.8, 730.9) = 16 17 18.42 -51 4 18.8
  Extent = 0.7 (0.3-1.3)", rotation angle = 0
  Source counts = 27.3 +/- 20.6
  Background counts = 396.1
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability