[Thu Oct  6 20:22:21 2011] Detection parameters:
  Position = (969.4, 917.7) = 16 17 43.83 -51 3 58.1
  Extent = 0.7" x 0.7", rotation angle = 134 degrees
  Source counts = 782.3 +/- 37.1
  Background counts = 593.7
  Rate = 0.01 +/- 0.0006

[Thu Oct  6 20:22:48 2011] Off-axis axis estimate = 2.88'
[Thu Oct  6 20:30:29 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:30:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 20:30:29 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Thu Oct  6 20:30:29 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.847
[Thu Oct  6 20:30:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.56"
[Thu Oct  6 20:30:31 2011] fullrun_ccd0_acisf11823_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 20:30:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11823_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 20:30:31 2011] fullrun_ccd0_acisf11823_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 20:30:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11823_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 20:30:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11823_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11823_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:30:33 2011] fullrun_ccd0_acisf11823_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 20:30:33 2011] fullrun_ccd0_acisf11823_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 20:30:33 2011] Fit fullrun_ccd0_acisf11823_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 20:31:31 2011] Spatial fit model total counts = 2273.430000, observed total counts = 2274.000000
[Thu Oct  6 20:31:31 2011] Offset between fit and detection position for source 1 = 1.147647 pixels
[Thu Oct  6 20:31:31 2011] 2264.760000 total counts/ 2101.060000 bgd. counts: snr = 3.571326
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.147647 pixels
  Position = (969.7, 918.8) = 16 17 43.84 -51 3 57.8
  Extent = 1.1 (0.7-1.5)", rotation angle = 0
  Source counts = 163.7 +/- 47.6
  Background counts = 2101.1
  Rate = 0.003 +/- 0.0008
[Thu Oct  6 20:31:32 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 20:31:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 20:31:32 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 20:31:32 2011] Source does appear to be extended
[Thu Oct  6 20:31:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 20:32:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 20:32:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 20:32:48 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Thu Oct  6 20:32:48 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.880
[Thu Oct  6 20:32:48 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.07"
[Thu Oct  6 20:32:49 2011] fullrun_ccd0_acisf11823_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 20:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11823_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 20:32:49 2011] fullrun_ccd0_acisf11823_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 20:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11823_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 20:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11823_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11823_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 20:32:50 2011] fullrun_ccd0_acisf11823_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 20:32:50 2011] fullrun_ccd0_acisf11823_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 20:32:50 2011] Fit fullrun_ccd0_acisf11823_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 20:33:36 2011] Spatial fit model total counts = 2530.390000, observed total counts = 2531.000000
[Thu Oct  6 20:33:36 2011] Offset between fit and detection position for source 1 = 0.063609 pixels
[Thu Oct  6 20:33:36 2011] 2521.280000 total counts/ 2351.760000 bgd. counts: snr = 3.495622
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.063609 pixels
  Position = (969.7, 918.8) = 16 17 43.84 -51 3 57.8
  Extent = 1.1 (0.8-1.7)", rotation angle = 0
  Source counts = 169.5 +/- 50.2
  Background counts = 2351.8
  Rate = 0.003 +/- 0.0008
[Thu Oct  6 20:33:37 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 20:33:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 20:33:37 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 20:33:37 2011] Source does appear to be extended
[Thu Oct  6 20:33:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 20:34:41 2011] Not overwriting source region fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_src.reg
[Thu Oct  6 20:34:41 2011] Extracting stamp from image fullrun_ccd0_acisf11823_pi14-548_cl_sm2.00.img.gz, (920, 869) - (1019, 968)
[Thu Oct  6 20:34:41 2011] Writing fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1.gif
[Thu Oct  6 20:34:50 2011] ../../acisf11823/products/events/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_src.evt and ../../acisf11823/products/events/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct  6 20:34:50 2011] Size of ../../acisf11823/products/events/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2152 counts
[Thu Oct  6 20:34:50 2011] Mean chipx,y = (788.35, 931.34)
[Thu Oct  6 20:34:50 2011] Mean tdetx,y = (3992.34, 4343.65)
[Thu Oct  6 20:34:50 2011] chipx,y range = (761.00-814.00, 902.00-961.00)
[Thu Oct  6 20:34:50 2011] Size of ../../acisf11823/products/events/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 8763 counts
[Thu Oct  6 20:34:50 2011] ../../acisf11823/products/images/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_src.img and ../../acisf11823/products/images/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct  6 20:34:50 2011] ../../acisf11823/products/spectra/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_src.pi and ../../acisf11823/products/spectra/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct  6 20:34:53 2011] ../../acisf11823/products/lightcurves/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_src.lc and ../../acisf11823/products/lightcurves/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct  6 20:39:11 2011] Keeping rmf generated by specextract
[Thu Oct  6 20:39:11 2011] 194.812
[Thu Oct  6 20:48:44 2011] Updating aperture counts using extracted products
[Thu Oct  6 20:48:44 2011] Error reading totcts from fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct  6 20:48:45 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 20:48:45 2011] Using photon index=1.80, rate=0.00271, arf fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1.arf
[Thu Oct  6 20:48:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 20:48:45 2011] Updating source flux to 5.1e-14
[Thu Oct  6 20:55:34 2011] Reading fit data from acisf11823/analysis//spectral/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct  6 20:55:34 2011] Spectral fit parameter nH value = 9.90003e+21
[Thu Oct  6 20:55:34 2011] Spectral fit parameter PhoIndex value = 6.56519
[Thu Oct  6 20:55:34 2011] Failed to get F(0.3-8.0) from acisf11823/analysis//spectral/fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 20:55:34 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 20:55:34 2011] Using Nh = 9.9e+21, photon index=6.57, rate=0.00271, arf fullrun_ccd0_acisf11823_pi14-548_pass1_cl_src1.arf
[Thu Oct  6 20:55:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 20:55:35 2011] Updating source flux to 1.6e-14