[Sat Oct  1 08:32:15 2011] Detection parameters:
  Position = (324.7, 537.1) = 14 56 0.02 -68 43 39.5
  Extent = 0.5" x 0.5", rotation angle = 140 degrees
  Source counts = 190.1 +/- 13.9
  Background counts = 1.9
  Rate = 0.005 +/- 0.0004

[Sat Oct  1 08:32:19 2011] Off-axis axis estimate = 0.31'
[Sat Oct  1 08:33:15 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 08:33:15 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Oct  1 08:33:15 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.859
[Sat Oct  1 08:33:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Sat Oct  1 08:33:15 2011] fullrun_ccd7_acisf11822_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 08:33:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11822_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 08:33:15 2011] fullrun_ccd7_acisf11822_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 08:33:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11822_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 08:33:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11822_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11822_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 08:33:16 2011] fullrun_ccd7_acisf11822_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 08:33:16 2011] fullrun_ccd7_acisf11822_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 08:33:16 2011] Fit fullrun_ccd7_acisf11822_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 08:33:29 2011] Spatial fit model total counts = 196.000000, observed total counts = 196.000000
[Sat Oct  1 08:33:29 2011] Offset between fit and detection position for source 3 = 0.701728 pixels
[Sat Oct  1 08:33:29 2011] 196.016050 total counts/ 8.189050 bgd. counts: snr = 65.635872
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.701728 pixels
  Position = (325.2, 537.6) = 14 56 0.02 -68 43 39.5
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 187.8 +/- 14.0
  Background counts = 8.2
  Rate = 0.005 +/- 0.0004
[Sat Oct  1 08:33:29 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 08:33:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 08:33:29 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 08:33:29 2011] Source does appear to be extended
[Sat Oct  1 08:33:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 08:33:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 08:33:46 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Oct  1 08:33:46 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.278
[Sat Oct  1 08:33:46 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.41"
[Sat Oct  1 08:33:47 2011] fullrun_ccd7_acisf11822_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 08:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11822_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 08:33:47 2011] fullrun_ccd7_acisf11822_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 08:33:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11822_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 08:33:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11822_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11822_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 08:33:48 2011] fullrun_ccd7_acisf11822_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 08:33:48 2011] fullrun_ccd7_acisf11822_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 08:33:48 2011] Fit fullrun_ccd7_acisf11822_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 08:33:58 2011] Spatial fit model total counts = 196.000000, observed total counts = 196.000000
[Sat Oct  1 08:33:58 2011] Offset between fit and detection position for source 3 = 0.000071 pixels
[Sat Oct  1 08:33:58 2011] 196.013350 total counts/ 8.162350 bgd. counts: snr = 65.751536
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000071 pixels
  Position = (325.2, 537.6) = 14 56 0.02 -68 43 39.5
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 187.9 +/- 14.0
  Background counts = 8.2
  Rate = 0.005 +/- 0.0004
[Sat Oct  1 08:33:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 08:33:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 08:33:58 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 08:33:58 2011] Source does appear to be extended
[Sat Oct  1 08:33:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 08:46:52 2011] Not overwriting source region fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_src.reg
[Sat Oct  1 08:46:52 2011] Extracting stamp from image fullrun_ccd7_acisf11822_pi14-548_cl_sm2.00.img.gz, (307, 519) - (344, 556)
[Sat Oct  1 08:46:52 2011] Writing fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3.gif
[Sat Oct  1 08:46:54 2011] ../../acisf11822/products/events/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_src.evt and ../../acisf11822/products/events/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct  1 08:46:54 2011] Size of ../../acisf11822/products/events/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_src.evt.gz[events] = 190 counts
[Sat Oct  1 08:46:54 2011] Mean chipx,y = (225.58, 521.18)
[Sat Oct  1 08:46:54 2011] Mean tdetx,y = (4142.58, 2223.18)
[Sat Oct  1 08:46:54 2011] chipx,y range = (206.00-245.00, 503.00-540.00)
[Sat Oct  1 08:46:55 2011] Size of ../../acisf11822/products/events/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 8 counts
[Sat Oct  1 08:46:55 2011] ../../acisf11822/products/images/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_src.img and ../../acisf11822/products/images/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct  1 08:46:55 2011] rmf not found, will run specextract
[Sat Oct  1 08:46:55 2011] arf not found, will run specextract
[Sat Oct  1 08:47:02 2011] ../../acisf11822/products/spectra/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3.warf not found
[Sat Oct  1 08:47:02 2011] ../../acisf11822/products/spectra/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3.wrmf not found
[Sat Oct  1 08:47:02 2011] Removal of ../../acisf11822/products/spectra/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3.soff failed
[Sat Oct  1 08:47:09 2011] ../../acisf11822/products/lightcurves/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_src.lc and ../../acisf11822/products/lightcurves/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct  1 08:58:33 2011] Keeping rmf generated by specextract
[Sat Oct  1 08:58:33 2011] 235.742
[Sat Oct  1 08:58:37 2011] Updating aperture counts using extracted products
[Sat Oct  1 08:58:37 2011] Error reading totcts from fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct  1 08:58:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 08:58:37 2011] Using photon index=1.80, rate=0.00541, arf fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3.arf
[Sat Oct  1 08:58:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 08:58:37 2011] Updating source flux to 4.3e-14
[Sat Oct  1 08:58:51 2011] Reading fit data from acisf11822/analysis//spectral/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_pl.csv
[Sat Oct  1 08:58:51 2011] Spectral fit parameter nH value = 1.75699e+21
[Sat Oct  1 08:58:51 2011] Spectral fit parameter PhoIndex value = 2.37715
[Sat Oct  1 08:58:51 2011] Failed to get F(0.3-8.0) from acisf11822/analysis//spectral/fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 08:58:51 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 08:58:51 2011] Using Nh = 1.8e+21, photon index=2.38, rate=0.00541, arf fullrun_ccd7_acisf11822_pi14-548_pass1_cl_src3.arf
[Sat Oct  1 08:58:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 08:58:51 2011] Updating source flux to 3.3e-14