[Sat Feb 18 12:53:05 2012] Detection parameters:
  Position = (516.0, 842.1) = 1 1 49.47 -72 54 18.0
  Extent = 1.8" x 1.5", rotation angle = 105 degrees
  Source counts = 31.6 +/- 6.7
  Background counts = 13.4
  Rate = 0.001 +/- 0.0002

[Sat Feb 18 12:53:05 2012] Off-axis axis estimate = 10.25'
[Sat Feb 18 12:56:03 2012] Using EEF radius (= 4.66 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 12:56:03 2012] Initial guess for spatial extent in simple fitting = 4.66"
[Sat Feb 18 12:56:03 2012] source mask rpix=9.5, npix_max = 397, mask sum = 400, frac = 1.006
[Sat Feb 18 12:56:03 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 4.66"
[Sat Feb 18 13:45:10 2012] fullrun_ccd2_acisf11821_pi14-548_cl_pass0_src3.ximg exists
[Sat Feb 18 13:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11821_pi14-548_cl_pass0_src3.csv
[Sat Feb 18 13:45:10 2012] fullrun_ccd2_acisf11821_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Feb 18 13:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11821_pi14-548_cl_pass0_src3.csv
[Sat Feb 18 13:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11821_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11821_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 13:45:10 2012] fullrun_ccd2_acisf11821_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Feb 18 13:45:10 2012] fullrun_ccd2_acisf11821_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Feb 18 13:45:10 2012] Fit fullrun_ccd2_acisf11821_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Feb 18 14:39:42 2012] Spatial fit model total counts = 74.996100, observed total counts = 75.000000
[Sat Feb 18 14:39:42 2012] Offset between fit and detection position for source 3 = 0.601586 pixels
[Sat Feb 18 14:39:42 2012] 75.329700 total counts/ 49.860900 bgd. counts: snr = 3.606853
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.601586 pixels
  Position = (516.2, 842.7) = 1 1 49.51 -72 54 17.9
  Extent = 2.2 (1.4-3.4)", rotation angle = 0
  Source counts = 25.5 +/- 8.7
  Background counts = 49.9
  Rate = 0.0009 +/- 0.0003
[Sat Feb 18 14:39:42 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 14:39:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 14:39:42 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 14:39:42 2012] Source does appear to be extended
[Sat Feb 18 14:39:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 14:39:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 14:39:58 2012] Initial guess for spatial extent in simple fitting = 2.17"
[Sat Feb 18 14:39:58 2012] source mask rpix=4.4, npix_max = 96, mask sum = 100, frac = 1.035
[Sat Feb 18 14:39:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 2.17"
[Sat Feb 18 14:59:08 2012] fullrun_ccd2_acisf11821_pi14-548_cl_pass1_src3.ximg exists
[Sat Feb 18 14:59:08 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11821_pi14-548_cl_pass1_src3.csv
[Sat Feb 18 14:59:08 2012] fullrun_ccd2_acisf11821_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Feb 18 14:59:08 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11821_pi14-548_cl_pass1_src3.csv
[Sat Feb 18 14:59:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11821_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11821_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 14:59:08 2012] fullrun_ccd2_acisf11821_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Feb 18 14:59:08 2012] fullrun_ccd2_acisf11821_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Feb 18 14:59:08 2012] Fit fullrun_ccd2_acisf11821_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Feb 18 15:57:05 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Sat Feb 18 15:57:05 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 15:57:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 15:57:05 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 15:57:05 2012] Source does appear to be extended
[Sat Feb 18 15:57:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 15:57:20 2012] Writing source region out to fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3_src.reg
[Sat Feb 18 15:57:20 2012] Extracting stamp from image fullrun_ccd2_acisf11821_pi14-548_cl_sm2.00.img.gz, (417, 743) - (616, 942)
[Sat Feb 18 15:57:20 2012] Writing fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3.gif
[Sat Feb 18 15:58:28 2012] Size of ../../acisf11821/products/events/fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3_src.evt.gz[events] = 41 counts
[Sat Feb 18 15:58:28 2012] Mean chipx,y = (719.93, 586.88)
[Sat Feb 18 15:58:28 2012] Mean tdetx,y = (3647.88, 3366.07)
[Sat Feb 18 15:58:28 2012] chipx,y range = (694.00-739.00, 560.00-619.00)
[Sat Feb 18 15:58:28 2012] Size of ../../acisf11821/products/events/fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 95 counts
[Sat Feb 18 15:58:29 2012] Not generating rmf since there are only 25 counts
[Sat Feb 18 15:58:29 2012] arf not found, will run specextract
[Sat Feb 18 15:59:02 2012] ../../acisf11821/products/spectra/fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3.warf not found
[Sat Feb 18 15:59:02 2012] ../../acisf11821/products/spectra/fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3.wrmf not found
[Sat Feb 18 15:59:02 2012] Removal of ../../acisf11821/products/spectra/fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3.soff failed
[Sat Feb 18 15:59:39 2012] Spectrum 3 has only 25 counts, deleting rmf
[Sat Feb 18 15:59:39 2012] 161.673
[Sat Feb 18 16:06:26 2012] Updating aperture counts using extracted products
[Sat Feb 18 16:06:26 2012] Error reading totcts from fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Feb 18 16:06:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 16:06:26 2012] Using photon index=1.80, rate=0.000904, arf fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3.arf
[Sat Feb 18 16:06:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 16:06:26 2012] Updating source flux to 1.3e-14
[Sat Feb 18 16:06:28 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 18 16:06:29 2012] acisf11821/analysis//spectral/fullrun_ccd2_acisf11821_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete