[Fri Oct 21 02:58:23 2011] Detection parameters:
  Position = (1350.4, 592.0) = 21 35 32.92 57 28 47.0
  Extent = 2.9" x 2.1", rotation angle = 100 degrees
  Source counts = 267.9 +/- 17.9
  Background counts = 52.1
  Rate = 0.009 +/- 0.0006

[Fri Oct 21 02:58:24 2011] Off-axis axis estimate = 10.76'
[Fri Oct 21 05:37:48 2011] Using EEF radius (= 5.14 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 05:37:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 05:37:48 2011] Initial guess for spatial extent in simple fitting = 5.14"
[Fri Oct 21 05:37:48 2011] source mask rpix=10.5, npix_max = 480, mask sum = 484, frac = 1.008
[Fri Oct 21 05:37:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.14"
[Fri Oct 21 05:58:11 2011] fullrun_ccd3_acisf11807_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 05:58:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11807_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 05:58:11 2011] fullrun_ccd3_acisf11807_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 05:58:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11807_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 05:58:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11807_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11807_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 05:58:11 2011] fullrun_ccd3_acisf11807_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 05:58:11 2011] fullrun_ccd3_acisf11807_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 05:58:11 2011] Fit fullrun_ccd3_acisf11807_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 06:04:24 2011] Spatial fit model total counts = 343.932000, observed total counts = 344.000000
[Fri Oct 21 06:04:24 2011] Offset between fit and detection position for source 1 = 0.359644 pixels
[Fri Oct 21 06:04:24 2011] 344.128300 total counts/ 72.866300 bgd. counts: snr = 31.777930
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.359644 pixels
  Position = (1350.6, 592.3) = 21 35 32.93 57 28 46.9
  Extent = 4.0 (3.6-4.5)", rotation angle = 0
  Source counts = 271.3 +/- 18.6
  Background counts = 72.9
  Rate = 0.009 +/- 0.0006
[Fri Oct 21 06:04:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 06:04:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 06:04:24 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 06:04:24 2011] Source does appear to be extended
[Fri Oct 21 06:04:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:26:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:26:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 08:26:59 2011] Initial guess for spatial extent in simple fitting = 3.98"
[Fri Oct 21 08:26:59 2011] source mask rpix=8.1, npix_max = 294, mask sum = 289, frac = 0.980
[Fri Oct 21 08:26:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.98"
[Fri Oct 21 08:45:06 2011] fullrun_ccd3_acisf11807_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 08:45:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11807_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 08:45:06 2011] fullrun_ccd3_acisf11807_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 08:45:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11807_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 08:45:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11807_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11807_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:45:06 2011] fullrun_ccd3_acisf11807_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 08:45:06 2011] fullrun_ccd3_acisf11807_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 08:45:06 2011] Fit fullrun_ccd3_acisf11807_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 08:51:58 2011] Spatial fit model total counts = 323.991000, observed total counts = 325.000000
[Fri Oct 21 08:51:58 2011] Offset between fit and detection position for source 1 = 0.268619 pixels
[Fri Oct 21 08:51:58 2011] 324.105000 total counts/ 76.127000 bgd. counts: snr = 28.421291
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.268619 pixels
  Position = (1350.8, 592.0) = 21 35 32.92 57 28 46.8
  Extent = 3.6 (3.1-4.1)", rotation angle = 0
  Source counts = 248.0 +/- 18.0
  Background counts = 76.1
  Rate = 0.008 +/- 0.0006
[Fri Oct 21 08:51:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:51:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:51:58 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:51:58 2011] Source does appear to be extended
[Fri Oct 21 08:51:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 09:59:06 2011] Writing source region out to fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 09:59:06 2011] Extracting stamp from image fullrun_ccd3_acisf11807_pi14-548_cl_sm2.00.img.gz, (1185, 426) - (1441, 758)
[Fri Oct 21 09:59:06 2011] Writing fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 09:59:08 2011] Size of ../../acisf11807/products/events/fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1_src.evt.gz[events] = 309 counts
[Fri Oct 21 09:59:08 2011] Mean chipx,y = (79.60, 35.93)
[Fri Oct 21 09:59:08 2011] Mean tdetx,y = (5096.07, 3140.60)
[Fri Oct 21 09:59:08 2011] chipx,y range = (36.00-118.00, 6.00-75.00)
[Fri Oct 21 09:59:08 2011] Size of ../../acisf11807/products/events/fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 143 counts
[Fri Oct 21 09:59:09 2011] rmf not found, will run specextract
[Fri Oct 21 09:59:09 2011] arf not found, will run specextract
[Fri Oct 21 09:59:19 2011] ../../acisf11807/products/spectra/fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1.warf not found
[Fri Oct 21 09:59:19 2011] ../../acisf11807/products/spectra/fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1.wrmf not found
[Fri Oct 21 09:59:19 2011] Removal of ../../acisf11807/products/spectra/fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1.soff failed
[Fri Oct 21 10:13:22 2011] Keeping rmf generated by specextract
[Fri Oct 21 10:13:22 2011] 152.086
[Fri Oct 21 10:13:47 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:13:47 2011] Error reading totcts from fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 10:13:48 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:13:48 2011] Using photon index=1.80, rate=0.00833, arf fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 10:13:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:13:48 2011] Updating source flux to 1.4e-13
[Fri Oct 21 10:14:23 2011] Reading fit data from acisf11807/analysis//spectral/fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 10:14:23 2011] Spectral fit parameter nH value = 2.41675e+21
[Fri Oct 21 10:14:23 2011] Spectral fit parameter PhoIndex value = 2.40566
[Fri Oct 21 10:14:23 2011] Failed to get F(0.3-8.0) from acisf11807/analysis//spectral/fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 10:14:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:14:23 2011] Using Nh = 2.4e+21, photon index=2.41, rate=0.00833, arf fullrun_ccd3_acisf11807_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 10:14:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:14:23 2011] Updating source flux to 1e-13