[Fri Oct 21 02:57:46 2011] Detection parameters:
  Position = (585.5, 513.0) = 21 36 58.41 57 34 44.2
  Extent = 0.8" x 0.5", rotation angle = 21 degrees
  Source counts = 11.5 +/- 3.5
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Fri Oct 21 02:57:46 2011] Off-axis axis estimate = 3.99'
[Fri Oct 21 05:11:52 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 05:11:52 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Fri Oct 21 05:11:52 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Fri Oct 21 05:11:52 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.83"
[Fri Oct 21 05:37:48 2011] fullrun_ccd2_acisf11807_pi14-548_cl_pass0_src22.ximg exists
[Fri Oct 21 05:37:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11807_pi14-548_cl_pass0_src22.csv
[Fri Oct 21 05:37:48 2011] fullrun_ccd2_acisf11807_pi14-548_cl_pass0_src22_1.ximg exists
[Fri Oct 21 05:37:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11807_pi14-548_cl_pass0_src22.csv
[Fri Oct 21 05:37:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11807_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11807_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 05:37:48 2011] fullrun_ccd2_acisf11807_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Fri Oct 21 05:37:48 2011] fullrun_ccd2_acisf11807_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Oct 21 05:37:48 2011] Fit fullrun_ccd2_acisf11807_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Oct 21 06:04:22 2011] Spatial fit model total counts = 17.972000, observed total counts = 17.000000
[Fri Oct 21 06:04:22 2011] Offset between fit and detection position for source 23 = 1.614461 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.614461 pixels
  Position = (585.1, 514.6) = 21 36 58.46 57 34 44.8
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 18.0 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct 21 06:04:22 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 06:04:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 06:04:22 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 06:04:22 2011] Source does appear to be extended
[Fri Oct 21 06:04:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 07:59:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 07:59:05 2011] Initial guess for spatial extent in simple fitting = 1.18"
[Fri Oct 21 07:59:05 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.894
[Fri Oct 21 07:59:05 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 1.18"
[Fri Oct 21 08:26:59 2011] fullrun_ccd2_acisf11807_pi14-548_cl_pass1_src22.ximg exists
[Fri Oct 21 08:26:59 2011] fullrun_ccd2_acisf11807_pi14-548_cl_pass1_src22_1.ximg exists
[Fri Oct 21 08:26:59 2011] Fit fullrun_ccd2_acisf11807_pi14-548_cl_pass1_src22 appears to have run properly
[Fri Oct 21 08:26:59 2011] fullrun_ccd2_acisf11807_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Fri Oct 21 08:26:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11807_pi14-548_cl_pass1_tfrozen_src22.csv
[Fri Oct 21 08:26:59 2011] fullrun_ccd2_acisf11807_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Oct 21 08:26:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11807_pi14-548_cl_pass1_tfrozen_src22.csv
[Fri Oct 21 08:26:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11807_pi14-548_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11807_pi14-548_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:51:56 2011] Spatial fit model total counts = 16.624700, observed total counts = 18.000000
[Fri Oct 21 08:51:56 2011] Offset between fit and detection position for source 23 = 0.279353 pixels
[Fri Oct 21 08:51:56 2011] 17.363600 total counts/ 0.000000 bgd. counts: snr = 468848323184705.875000
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.279353 pixels
  Position = (585.3, 514.3) = 21 36 58.45 57 34 44.6
  Extent = 1.2 (0.9-1.6)", rotation angle = 0
  Source counts = 17.4 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct 21 08:51:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:51:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:51:56 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:51:56 2011] Source does appear to be extended
[Fri Oct 21 08:51:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 09:39:13 2011] Writing source region out to fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23_src.reg
[Fri Oct 21 09:39:13 2011] Extracting stamp from image fullrun_ccd2_acisf11807_pi14-548_cl_sm2.00.img.gz, (531, 460) - (640, 569)
[Fri Oct 21 09:39:13 2011] Writing fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23.gif
[Fri Oct 21 09:51:28 2011] Size of ../../acisf11807/products/events/fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23_src.evt.gz[events] = 18 counts
[Fri Oct 21 09:51:28 2011] Mean chipx,y = (276.89, 600.89)
[Fri Oct 21 09:51:28 2011] Mean tdetx,y = (3661.89, 3809.11)
[Fri Oct 21 09:51:28 2011] chipx,y range = (259.00-294.00, 583.00-623.00)
[Fri Oct 21 09:51:28 2011] Size of ../../acisf11807/products/events/fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 24 counts
[Fri Oct 21 09:51:29 2011] Not generating rmf since there are only 17 counts
[Fri Oct 21 09:51:29 2011] arf not found, will run specextract
[Fri Oct 21 09:52:01 2011] ../../acisf11807/products/spectra/fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23.warf not found
[Fri Oct 21 09:52:01 2011] ../../acisf11807/products/spectra/fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23.wrmf not found
[Fri Oct 21 09:52:01 2011] Removal of ../../acisf11807/products/spectra/fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23.soff failed
[Fri Oct 21 09:59:06 2011] Spectrum 23 has only 17 counts, deleting rmf
[Fri Oct 21 09:59:06 2011] 184.317
[Fri Oct 21 10:13:47 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:13:47 2011] Error reading totcts from fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23_src.pi.gz
[Fri Oct 21 10:13:47 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:13:47 2011] Using photon index=1.80, rate=0.000584, arf fullrun_ccd2_acisf11807_pi14-548_pass1_cl_src23.arf
[Fri Oct 21 10:13:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:13:47 2011] Updating source flux to 8.6e-15
[Fri Oct 21 10:14:16 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting