[Fri Oct 21 02:57:43 2011] Detection parameters:
  Position = (1134.1, 806.1) = 21 36 36.29 57 25 14.0
  Extent = 1.6" x 0.5", rotation angle = 69 degrees
  Source counts = 14.1 +/- 4.0
  Background counts = 1.9
  Rate = 0.0005 +/- 0.0001

[Fri Oct 21 02:57:43 2011] Off-axis axis estimate = 5.99'
[Fri Oct 21 04:28:56 2011] Using EEF radius (= 1.62 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:28:56 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Fri Oct 21 04:28:56 2011] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.108
[Fri Oct 21 04:28:56 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 1.62"
[Fri Oct 21 05:11:52 2011] fullrun_ccd1_acisf11807_pi14-548_cl_pass0_src24.ximg exists
[Fri Oct 21 05:11:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11807_pi14-548_cl_pass0_src24.csv
[Fri Oct 21 05:11:52 2011] fullrun_ccd1_acisf11807_pi14-548_cl_pass0_src24_1.ximg exists
[Fri Oct 21 05:11:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11807_pi14-548_cl_pass0_src24.csv
[Fri Oct 21 05:11:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11807_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11807_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 05:11:52 2011] fullrun_ccd1_acisf11807_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Fri Oct 21 05:11:52 2011] fullrun_ccd1_acisf11807_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Oct 21 05:11:52 2011] Fit fullrun_ccd1_acisf11807_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Oct 21 06:04:19 2011] Spatial fit model total counts = 15.962700, observed total counts = 17.000000
[Fri Oct 21 06:04:19 2011] Offset between fit and detection position for source 28 = 0.612404 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.612404 pixels
  Position = (1134.5, 806.5) = 21 36 36.29 57 25 14.0
  Extent = 2.2 (1.6-3.2)" x 0.6 (0.4-0.9)", rotation angle = 111 (100-121) degrees
  Source counts = 16.0 +/- 4.0
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct 21 06:04:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 06:04:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 06:04:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 06:04:19 2011] Source does appear to be extended
[Fri Oct 21 06:04:19 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.80
[Fri Oct 21 06:04:19 2011] Source is asymmetric
[Fri Oct 21 07:22:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 07:22:59 2011] Initial guess for spatial extent in simple fitting = 1.40"
[Fri Oct 21 07:22:59 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.092
[Fri Oct 21 07:22:59 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 1.40"
[Fri Oct 21 07:59:04 2011] fullrun_ccd1_acisf11807_pi14-548_cl_pass1_src24.ximg exists
[Fri Oct 21 07:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11807_pi14-548_cl_pass1_src24.csv
[Fri Oct 21 07:59:04 2011] fullrun_ccd1_acisf11807_pi14-548_cl_pass1_src24_1.ximg exists
[Fri Oct 21 07:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11807_pi14-548_cl_pass1_src24.csv
[Fri Oct 21 07:59:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11807_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11807_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 07:59:05 2011] fullrun_ccd1_acisf11807_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Fri Oct 21 07:59:05 2011] fullrun_ccd1_acisf11807_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Oct 21 07:59:05 2011] Fit fullrun_ccd1_acisf11807_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Fri Oct 21 08:51:53 2011] Spatial fit model total counts = 16.255600, observed total counts = 17.000000
[Fri Oct 21 08:51:53 2011] Offset between fit and detection position for source 28 = 1.140310 pixels
[Fri Oct 21 08:51:53 2011] 16.539580 total counts/ 6.285780 bgd. counts: snr = 4.089830
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.140310 pixels
  Position = (1134.9, 807.6) = 21 36 36.27 57 25 14.5
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 10.3 +/- 4.1
  Background counts = 6.3
  Rate = 0.0003 +/- 0.0001
[Fri Oct 21 08:51:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:51:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:51:53 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:51:53 2011] Source does appear to be extended
[Fri Oct 21 08:51:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 09:19:13 2011] Writing source region out to fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28_src.reg
[Fri Oct 21 09:19:13 2011] Extracting stamp from image fullrun_ccd1_acisf11807_pi14-548_cl_sm2.00.img.gz, (1095, 767) - (1175, 848)
[Fri Oct 21 09:19:13 2011] Writing fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28.gif
[Fri Oct 21 09:31:37 2011] Size of ../../acisf11807/products/events/fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28_src.evt.gz[events] = 13 counts
[Fri Oct 21 09:31:37 2011] Mean chipx,y = (119.62, 319.08)
[Fri Oct 21 09:31:37 2011] Mean tdetx,y = (4812.92, 4226.62)
[Fri Oct 21 09:31:37 2011] chipx,y range = (106.00-139.00, 307.00-342.00)
[Fri Oct 21 09:31:37 2011] Size of ../../acisf11807/products/events/fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 9 counts
[Fri Oct 21 09:31:38 2011] Not generating rmf since there are only 10 counts
[Fri Oct 21 09:31:38 2011] arf not found, will run specextract
[Fri Oct 21 09:32:00 2011] ../../acisf11807/products/spectra/fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28.warf not found
[Fri Oct 21 09:32:00 2011] ../../acisf11807/products/spectra/fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28.wrmf not found
[Fri Oct 21 09:32:00 2011] Removal of ../../acisf11807/products/spectra/fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28.soff failed
[Fri Oct 21 09:39:12 2011] Spectrum 28 has only 10 counts, deleting rmf
[Fri Oct 21 09:39:12 2011] 186.102
[Fri Oct 21 10:13:46 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:13:46 2011] Error reading totcts from fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28_src.pi.gz
[Fri Oct 21 10:13:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:13:46 2011] Using photon index=1.80, rate=0.000345, arf fullrun_ccd1_acisf11807_pi14-548_pass1_cl_src28.arf
[Fri Oct 21 10:13:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:13:46 2011] Updating source flux to 5e-15
[Fri Oct 21 10:14:02 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting