[Sat Oct 29 10:49:39 2011] Detection parameters:
  Position = (302.0, 214.4) = 17 48 53.30 -20 21 42.0
  Extent = 0.5" x 0.5", rotation angle = 70 degrees
  Source counts = 16.2 +/- 4.1
  Background counts = 0.8
  Rate = 0.003 +/- 0.0008

[Sat Oct 29 10:49:39 2011] Off-axis axis estimate = 0.05'
[Sat Oct 29 10:49:49 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 10:49:49 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sat Oct 29 10:49:49 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.805
[Sat Oct 29 10:49:49 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.43"
[Sat Oct 29 10:49:50 2011] fullrun_ccd7_acisf11802_pi14-548_cl_pass0_src7.ximg exists
[Sat Oct 29 10:49:50 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11802_pi14-548_cl_pass0_src7.csv
[Sat Oct 29 10:49:50 2011] fullrun_ccd7_acisf11802_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Oct 29 10:49:50 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11802_pi14-548_cl_pass0_src7.csv
[Sat Oct 29 10:49:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11802_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11802_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 10:49:50 2011] fullrun_ccd7_acisf11802_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Oct 29 10:49:50 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11802_pi14-548_cl_pass0_tfrozen_src7.csv
[Sat Oct 29 10:49:50 2011] fullrun_ccd7_acisf11802_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Oct 29 10:49:50 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11802_pi14-548_cl_pass0_tfrozen_src7.csv
[Sat Oct 29 10:49:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11802_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11802_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 10:49:52 2011] Spatial fit model total counts = -7.911540, observed total counts = 62.000000
[Sat Oct 29 10:49:52 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Oct 29 10:49:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 10:49:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 10:49:52 2011] Assessing source extent using major
[Sat Oct 29 10:49:52 2011] Source does appear to be extended
[Sat Oct 29 10:49:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 10:49:56 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 10:49:56 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sat Oct 29 10:49:56 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.805
[Sat Oct 29 10:49:56 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.43"
[Sat Oct 29 10:49:57 2011] fullrun_ccd7_acisf11802_pi14-548_cl_pass1_src7.ximg exists
[Sat Oct 29 10:49:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11802_pi14-548_cl_pass1_src7.csv
[Sat Oct 29 10:49:57 2011] fullrun_ccd7_acisf11802_pi14-548_cl_pass1_src7_1.ximg exists
[Sat Oct 29 10:49:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11802_pi14-548_cl_pass1_src7.csv
[Sat Oct 29 10:49:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11802_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11802_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 10:49:57 2011] fullrun_ccd7_acisf11802_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sat Oct 29 10:49:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11802_pi14-548_cl_pass1_tfrozen_src7.csv
[Sat Oct 29 10:49:57 2011] fullrun_ccd7_acisf11802_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Oct 29 10:49:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11802_pi14-548_cl_pass1_tfrozen_src7.csv
[Sat Oct 29 10:49:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11802_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11802_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 10:49:59 2011] Spatial fit model total counts = -3.790620, observed total counts = 62.000000
[Sat Oct 29 10:49:59 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Oct 29 10:49:59 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 10:49:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 10:49:59 2011] Assessing source extent using major
[Sat Oct 29 10:49:59 2011] Source does appear to be extended
[Sat Oct 29 10:49:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 10:50:07 2011] Not overwriting source region fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 10:50:07 2011] Extracting stamp from image fullrun_ccd7_acisf11802_pi14-548_cl_sm2.00.img.gz, (280, 192) - (325, 237)
[Sat Oct 29 10:50:07 2011] Writing fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 10:50:22 2011] ../../acisf11802/products/events/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_src.evt and ../../acisf11802/products/events/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 29 10:50:22 2011] Size of ../../acisf11802/products/events/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_src.evt.gz[events] = 17 counts
[Sat Oct 29 10:50:22 2011] Mean chipx,y = (186.41, 494.35)
[Sat Oct 29 10:50:22 2011] Mean tdetx,y = (4103.41, 2196.35)
[Sat Oct 29 10:50:22 2011] chipx,y range = (170.00-200.00, 484.00-517.00)
[Sat Oct 29 10:50:22 2011] Size of ../../acisf11802/products/events/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 15 counts
[Sat Oct 29 10:50:22 2011] ../../acisf11802/products/images/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_src.img and ../../acisf11802/products/images/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 29 10:50:22 2011] ../../acisf11802/products/spectra/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_src.pi and ../../acisf11802/products/spectra/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 29 10:50:22 2011] Not generating rmf since there are only 16 counts
[Sat Oct 29 10:50:24 2011] ../../acisf11802/products/lightcurves/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_src.lc and ../../acisf11802/products/lightcurves/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 29 10:50:25 2011] 234.018
[Sat Oct 29 10:50:26 2011] Updating aperture counts using extracted products
[Sat Oct 29 10:50:26 2011] Error reading totcts from fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 10:50:26 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 10:50:26 2011] Using photon index=1.80, rate=0.0033, arf fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 10:50:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 10:50:26 2011] Updating source flux to 2.9e-14
[Sat Oct 29 10:50:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Oct 29 10:50:29 2011] acisf11802/analysis//spectral/fullrun_ccd7_acisf11802_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete