[Thu Feb 16 00:38:14 2012] Detection parameters:
  Position = (169.1, 813.1) = 18 44 54.66 -2 56 54.1
  Extent = 3.0" x 2.4", rotation angle = 97 degrees
  Source counts = 121.5 +/- 12.1
  Background counts = 25.5
  Rate = 0.004 +/- 0.0004

[Thu Feb 16 00:38:15 2012] Off-axis axis estimate = 8.35'
[Thu Feb 16 00:40:47 2012] Using EEF radius (= 3.08 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:40:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 00:40:47 2012] Initial guess for spatial extent in simple fitting = 3.08"
[Thu Feb 16 00:40:47 2012] source mask rpix=6.3, npix_max = 182, mask sum = 196, frac = 1.073
[Thu Feb 16 00:40:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.08"
[Thu Feb 16 01:03:30 2012] fullrun_ccd0_acisf11801_pi14-548_cl_pass0_src1.ximg exists
[Thu Feb 16 01:03:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11801_pi14-548_cl_pass0_src1.csv
[Thu Feb 16 01:03:30 2012] fullrun_ccd0_acisf11801_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Feb 16 01:03:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11801_pi14-548_cl_pass0_src1.csv
[Thu Feb 16 01:03:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11801_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11801_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 01:03:30 2012] fullrun_ccd0_acisf11801_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 01:03:30 2012] fullrun_ccd0_acisf11801_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 01:03:30 2012] Fit fullrun_ccd0_acisf11801_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 01:43:28 2012] Spatial fit model total counts = 165.000000, observed total counts = 165.000000
[Thu Feb 16 01:43:28 2012] Offset between fit and detection position for source 1 = 1.427258 pixels
[Thu Feb 16 01:43:28 2012] 164.914000 total counts/ 36.358000 bgd. counts: snr = 21.320253
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.427258 pixels
  Position = (169.8, 814.4) = 18 44 54.65 -2 56 53.8
  Extent = 3.0 (2.6-3.5)", rotation angle = 0
  Source counts = 128.6 +/- 12.8
  Background counts = 36.4
  Rate = 0.004 +/- 0.0004
[Thu Feb 16 01:43:28 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 01:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 01:43:28 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 01:43:28 2012] Source does appear to be extended
[Thu Feb 16 01:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 01:43:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 01:43:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 01:43:50 2012] Initial guess for spatial extent in simple fitting = 2.96"
[Thu Feb 16 01:43:50 2012] source mask rpix=6.0, npix_max = 170, mask sum = 169, frac = 0.993
[Thu Feb 16 01:43:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.96"
[Thu Feb 16 02:03:34 2012] fullrun_ccd0_acisf11801_pi14-548_cl_pass1_src1.ximg exists
[Thu Feb 16 02:03:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11801_pi14-548_cl_pass1_src1.csv
[Thu Feb 16 02:03:34 2012] fullrun_ccd0_acisf11801_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Feb 16 02:03:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11801_pi14-548_cl_pass1_src1.csv
[Thu Feb 16 02:03:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11801_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11801_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 02:03:34 2012] fullrun_ccd0_acisf11801_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 16 02:03:34 2012] fullrun_ccd0_acisf11801_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 16 02:03:34 2012] Fit fullrun_ccd0_acisf11801_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 02:38:50 2012] Spatial fit model total counts = 164.000000, observed total counts = 164.000000
[Thu Feb 16 02:38:50 2012] Offset between fit and detection position for source 1 = 0.084644 pixels
[Thu Feb 16 02:38:50 2012] 163.788500 total counts/ 38.727500 bgd. counts: snr = 20.096118
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.084644 pixels
  Position = (169.8, 814.5) = 18 44 54.65 -2 56 53.7
  Extent = 2.9 (2.5-3.4)", rotation angle = 0
  Source counts = 125.1 +/- 12.8
  Background counts = 38.7
  Rate = 0.004 +/- 0.0004
[Thu Feb 16 02:38:50 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 02:38:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 02:38:50 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 02:38:50 2012] Source does appear to be extended
[Thu Feb 16 02:38:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 02:39:10 2012] Writing source region out to fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1_src.reg
[Thu Feb 16 02:39:10 2012] Extracting stamp from image fullrun_ccd0_acisf11801_pi14-548_cl_sm2.00.img.gz, (38, 683) - (302, 946)
[Thu Feb 16 02:39:10 2012] Writing fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1.gif
[Thu Feb 16 02:39:12 2012] Size of ../../acisf11801/products/events/fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1_src.evt.gz[events] = 157 counts
[Thu Feb 16 02:39:12 2012] Mean chipx,y = (114.77, 892.22)
[Thu Feb 16 02:39:12 2012] Mean tdetx,y = (3953.22, 5017.23)
[Thu Feb 16 02:39:12 2012] chipx,y range = (84.00-150.00, 857.00-922.00)
[Thu Feb 16 02:39:12 2012] Size of ../../acisf11801/products/events/fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 230 counts
[Thu Feb 16 02:39:13 2012] rmf not found, will run specextract
[Thu Feb 16 02:39:13 2012] arf not found, will run specextract
[Thu Feb 16 02:39:45 2012] ../../acisf11801/products/spectra/fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1.warf not found
[Thu Feb 16 02:39:45 2012] ../../acisf11801/products/spectra/fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1.wrmf not found
[Thu Feb 16 02:39:45 2012] Removal of ../../acisf11801/products/spectra/fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1.soff failed
[Thu Feb 16 02:45:46 2012] Keeping rmf generated by specextract
[Thu Feb 16 02:45:46 2012] 163.094
[Thu Feb 16 03:07:38 2012] Updating aperture counts using extracted products
[Thu Feb 16 03:07:38 2012] Error reading totcts from fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Feb 16 03:07:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 03:07:38 2012] Using photon index=1.80, rate=0.00422, arf fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1.arf
[Thu Feb 16 03:07:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 16 03:07:38 2012] Updating source flux to 8.7e-14
[Thu Feb 16 03:07:48 2012] Reading fit data from acisf11801/analysis//spectral/fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1_pl.csv
[Thu Feb 16 03:07:48 2012] Spectral fit parameter nH value = 1.99091e+22
[Thu Feb 16 03:07:48 2012] Spectral fit parameter PhoIndex value = -0.0479306
[Thu Feb 16 03:07:48 2012] Failed to get F(0.3-8.0) from acisf11801/analysis//spectral/fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 16 03:07:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 03:07:48 2012] Using Nh = 2e+22, photon index=-0.05, rate=0.00422, arf fullrun_ccd0_acisf11801_pi14-548_pass1_cl_src1.arf
[Thu Feb 16 03:07:48 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 16 03:07:48 2012] Updating source flux to 1.6e-13