[Tue Apr 10 13:15:55 2012] Detection parameters:
  Position = (760.2, 732.4) = 9 55 46.60 69 40 40.9
  Extent = 0.5" x 0.5", rotation angle = 160 degrees
  Source counts = 820.8 +/- 30.0
  Background counts = 77.2
  Rate = 0.05 +/- 0.002

[Tue Apr 10 13:15:58 2012] Off-axis axis estimate = 3.06'
[Tue Apr 10 13:16:40 2012] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:16:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 13:16:40 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Tue Apr 10 13:16:40 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.776
[Tue Apr 10 13:16:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.59"
[Tue Apr 10 13:16:42 2012] fullrun_ccd7_acisf11800_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 13:16:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11800_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 13:16:42 2012] fullrun_ccd7_acisf11800_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 13:16:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11800_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 13:16:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11800_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11800_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:16:43 2012] fullrun_ccd7_acisf11800_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 13:16:43 2012] fullrun_ccd7_acisf11800_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 13:16:43 2012] Fit fullrun_ccd7_acisf11800_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 13:17:05 2012] Spatial fit model total counts = 1180.990000, observed total counts = 1181.000000
[Tue Apr 10 13:17:05 2012] Offset between fit and detection position for source 2 = 0.647853 pixels
[Tue Apr 10 13:17:05 2012] 1163.287000 total counts/ 335.404000 bgd. counts: snr = 45.204831
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.647853 pixels
  Position = (760.6, 732.9) = 9 55 46.61 69 40 40.9
  Extent = 0.6 (0.6-0.6)", rotation angle = 0
  Source counts = 827.9 +/- 34.1
  Background counts = 335.4
  Rate = 0.05 +/- 0.002
[Tue Apr 10 13:17:05 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:17:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:17:05 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:17:05 2012] Source does appear to be extended
[Tue Apr 10 13:17:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:17:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:17:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 13:17:16 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Tue Apr 10 13:17:16 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.063
[Tue Apr 10 13:17:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.58"
[Tue Apr 10 13:17:17 2012] fullrun_ccd7_acisf11800_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 13:17:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11800_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 13:17:17 2012] fullrun_ccd7_acisf11800_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 13:17:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11800_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 13:17:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11800_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11800_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:17:18 2012] fullrun_ccd7_acisf11800_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 13:17:18 2012] fullrun_ccd7_acisf11800_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 13:17:18 2012] Fit fullrun_ccd7_acisf11800_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 13:17:26 2012] Spatial fit model total counts = 1165.800000, observed total counts = 1166.000000
[Tue Apr 10 13:17:26 2012] Offset between fit and detection position for source 2 = 0.008453 pixels
[Tue Apr 10 13:17:26 2012] 1148.053000 total counts/ 326.498000 bgd. counts: snr = 45.467008
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008453 pixels
  Position = (760.6, 732.9) = 9 55 46.61 69 40 40.9
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 821.6 +/- 33.9
  Background counts = 326.5
  Rate = 0.05 +/- 0.002
[Tue Apr 10 13:17:26 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:17:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:17:26 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:17:26 2012] Source does appear to be extended
[Tue Apr 10 13:17:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:18:15 2012] Not overwriting source region fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_src.reg
[Tue Apr 10 13:18:15 2012] Extracting stamp from image fullrun_ccd7_acisf11800_pi14-548_cl_sm2.00.img.gz, (734, 706) - (787, 759)
[Tue Apr 10 13:18:15 2012] Writing fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2.gif
[Tue Apr 10 13:18:17 2012] ../../acisf11800/products/events/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_src.evt and ../../acisf11800/products/events/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 13:18:17 2012] Size of ../../acisf11800/products/events/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_src.evt.gz[events] = 933 counts
[Tue Apr 10 13:18:17 2012] Mean chipx,y = (564.38, 528.30)
[Tue Apr 10 13:18:17 2012] Mean tdetx,y = (4481.38, 2230.30)
[Tue Apr 10 13:18:17 2012] chipx,y range = (546.00-584.00, 508.00-549.00)
[Tue Apr 10 13:18:17 2012] Size of ../../acisf11800/products/events/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 387 counts
[Tue Apr 10 13:18:17 2012] ../../acisf11800/products/images/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_src.img and ../../acisf11800/products/images/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 13:18:17 2012] ../../acisf11800/products/spectra/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_src.pi and ../../acisf11800/products/spectra/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 13:18:20 2012] ../../acisf11800/products/lightcurves/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_src.lc and ../../acisf11800/products/lightcurves/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 13:19:50 2012] Keeping rmf generated by specextract
[Tue Apr 10 13:19:51 2012] 227.089
[Tue Apr 10 13:19:53 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:19:53 2012] Error reading totcts from fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Apr 10 13:19:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:19:53 2012] Using photon index=1.80, rate=0.0488, arf fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2.arf
[Tue Apr 10 13:19:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 13:19:53 2012] Updating source flux to 3.7e-13
[Tue Apr 10 13:20:59 2012] Reading fit data from acisf11800/analysis//spectral/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_pl.csv
[Tue Apr 10 13:20:59 2012] Spectral fit parameter nH value = 4.93542e+21
[Tue Apr 10 13:20:59 2012] Spectral fit parameter PhoIndex value = 1.97174
[Tue Apr 10 13:20:59 2012] Failed to get F(0.3-8.0) from acisf11800/analysis//spectral/fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 13:20:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:20:59 2012] Using Nh = 4.9e+21, photon index=1.97, rate=0.0488, arf fullrun_ccd7_acisf11800_pi14-548_pass1_cl_src2.arf
[Tue Apr 10 13:20:59 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 13:20:59 2012] Updating source flux to 4.4e-13