[Mon Oct 10 14:47:07 2011] Detection parameters:
  Position = (612.3, 531.8) = 23 41 5.20 -51 21 2.2
  Extent = 0.7" x 0.5", rotation angle = 34 degrees
  Source counts = 27.1 +/- 5.4
  Background counts = 1.9
  Rate = 0.0005 +/- 0.0001

[Mon Oct 10 14:47:10 2011] Off-axis axis estimate = 5.12'
[Mon Oct 10 14:48:17 2011] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 14:48:17 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Mon Oct 10 14:48:17 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Mon Oct 10 14:48:17 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.23"
[Mon Oct 10 14:48:18 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src10.ximg exists
[Mon Oct 10 14:48:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src10.csv
[Mon Oct 10 14:48:18 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src10_1.ximg exists
[Mon Oct 10 14:48:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src10.csv
[Mon Oct 10 14:48:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 14:48:18 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Mon Oct 10 14:48:19 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Oct 10 14:48:19 2011] Fit fullrun_ccd3_acisf11799_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Oct 10 14:48:33 2011] Spatial fit model total counts = 33.947600, observed total counts = 34.000000
[Mon Oct 10 14:48:33 2011] Offset between fit and detection position for source 5 = 0.866870 pixels
[Mon Oct 10 14:48:33 2011] 33.733200 total counts/ 8.112400 bgd. counts: snr = 8.995349
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.866870 pixels
  Position = (612.8, 532.5) = 23 41 5.20 -51 21 2.1
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 25.6 +/- 5.8
  Background counts = 8.1
  Rate = 0.0005 +/- 0.0001
[Mon Oct 10 14:48:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 14:48:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 14:48:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 14:48:33 2011] Source does appear to be extended
[Mon Oct 10 14:48:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 14:49:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 14:49:03 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Oct 10 14:49:03 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.823
[Mon Oct 10 14:49:03 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.69"
[Mon Oct 10 14:49:04 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src10.ximg exists
[Mon Oct 10 14:49:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src10.csv
[Mon Oct 10 14:49:04 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src10_1.ximg exists
[Mon Oct 10 14:49:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src10.csv
[Mon Oct 10 14:49:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 14:49:05 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Mon Oct 10 14:49:05 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Oct 10 14:49:05 2011] Fit fullrun_ccd3_acisf11799_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Oct 10 14:49:20 2011] Spatial fit model total counts = 32.627400, observed total counts = 34.000000
[Mon Oct 10 14:49:20 2011] Offset between fit and detection position for source 5 = 0.037916 pixels
[Mon Oct 10 14:49:20 2011] 32.129560 total counts/ 5.672560 bgd. counts: snr = 11.108388
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.037916 pixels
  Position = (612.8, 532.5) = 23 41 5.20 -51 21 2.1
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 26.5 +/- 5.7
  Background counts = 5.7
  Rate = 0.0005 +/- 0.0001
[Mon Oct 10 14:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 14:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 14:49:20 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 14:49:20 2011] Source does appear to be extended
[Mon Oct 10 14:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 14:53:04 2011] Not overwriting source region fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_src.reg
[Mon Oct 10 14:53:04 2011] Extracting stamp from image fullrun_ccd3_acisf11799_pi14-548_cl_sm2.00.img.gz, (579, 499) - (647, 566)
[Mon Oct 10 14:53:04 2011] Writing fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5.gif
[Mon Oct 10 14:53:37 2011] ../../acisf11799/products/events/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_src.evt and ../../acisf11799/products/events/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Oct 10 14:53:37 2011] Size of ../../acisf11799/products/events/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_src.evt.gz[events] = 30 counts
[Mon Oct 10 14:53:37 2011] Mean chipx,y = (650.63, 403.83)
[Mon Oct 10 14:53:37 2011] Mean tdetx,y = (4728.17, 3711.63)
[Mon Oct 10 14:53:37 2011] chipx,y range = (631.00-668.00, 389.00-422.00)
[Mon Oct 10 14:53:37 2011] Size of ../../acisf11799/products/events/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 24 counts
[Mon Oct 10 14:53:37 2011] ../../acisf11799/products/images/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_src.img and ../../acisf11799/products/images/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Oct 10 14:53:37 2011] ../../acisf11799/products/spectra/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_src.pi and ../../acisf11799/products/spectra/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Oct 10 14:53:37 2011] Not generating rmf since there are only 26 counts
[Mon Oct 10 14:53:40 2011] ../../acisf11799/products/lightcurves/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_src.lc and ../../acisf11799/products/lightcurves/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Oct 10 14:55:49 2011] 177.329
[Mon Oct 10 14:56:11 2011] Updating aperture counts using extracted products
[Mon Oct 10 14:56:11 2011] Error reading totcts from fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Oct 10 14:56:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 14:56:11 2011] Using photon index=1.80, rate=0.000526, arf fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src5.arf
[Mon Oct 10 14:56:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 14:56:12 2011] Updating source flux to 7.1e-15
[Mon Oct 10 14:56:27 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting