[Mon Oct 10 14:47:08 2011] Detection parameters:
  Position = (1090.1, 981.4) = 23 40 40.16 -51 17 20.6
  Extent = 1.4" x 0.6", rotation angle = 94 degrees
  Source counts = 32.6 +/- 6.2
  Background counts = 5.4
  Rate = 0.0006 +/- 0.0001

[Mon Oct 10 14:47:10 2011] Off-axis axis estimate = 6.18'
[Mon Oct 10 14:48:17 2011] Using EEF radius (= 1.72 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 14:48:17 2011] Initial guess for spatial extent in simple fitting = 1.72"
[Mon Oct 10 14:48:17 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.999
[Mon Oct 10 14:48:17 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 1.72"
[Mon Oct 10 14:48:18 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src8.ximg exists
[Mon Oct 10 14:48:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src8.csv
[Mon Oct 10 14:48:18 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src8_1.ximg exists
[Mon Oct 10 14:48:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src8.csv
[Mon Oct 10 14:48:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11799_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 14:48:18 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Mon Oct 10 14:48:18 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Oct 10 14:48:18 2011] Fit fullrun_ccd3_acisf11799_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Oct 10 14:48:33 2011] Spatial fit model total counts = 38.018700, observed total counts = 38.000000
[Mon Oct 10 14:48:33 2011] Offset between fit and detection position for source 13 = 0.532889 pixels
[Mon Oct 10 14:48:33 2011] 37.821980 total counts/ 3.334380 bgd. counts: snr = 18.886671
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.532889 pixels
  Position = (1090.7, 981.5) = 23 40 40.16 -51 17 20.9
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 34.5 +/- 6.1
  Background counts = 3.3
  Rate = 0.0007 +/- 0.0001
[Mon Oct 10 14:48:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 14:48:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 14:48:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 14:48:33 2011] Source does appear to be extended
[Mon Oct 10 14:48:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 14:49:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 14:49:03 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Mon Oct 10 14:49:03 2011] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.844
[Mon Oct 10 14:49:03 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 1.22"
[Mon Oct 10 14:49:04 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src8.ximg exists
[Mon Oct 10 14:49:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src8.csv
[Mon Oct 10 14:49:04 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src8_1.ximg exists
[Mon Oct 10 14:49:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src8.csv
[Mon Oct 10 14:49:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11799_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 14:49:04 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Mon Oct 10 14:49:05 2011] fullrun_ccd3_acisf11799_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Oct 10 14:49:05 2011] Fit fullrun_ccd3_acisf11799_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Oct 10 14:49:20 2011] Spatial fit model total counts = 36.166800, observed total counts = 36.000000
[Mon Oct 10 14:49:20 2011] Offset between fit and detection position for source 13 = 0.624343 pixels
[Mon Oct 10 14:49:20 2011] 35.768130 total counts/ 1.610930 bgd. counts: snr = 26.911873
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.624343 pixels
  Position = (1090.5, 982.1) = 23 40 40.16 -51 17 20.6
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 34.2 +/- 6.0
  Background counts = 1.6
  Rate = 0.0007 +/- 0.0001
[Mon Oct 10 14:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 14:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 14:49:20 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 14:49:20 2011] Source does appear to be extended
[Mon Oct 10 14:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 14:53:04 2011] Not overwriting source region fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_src.reg
[Mon Oct 10 14:53:04 2011] Extracting stamp from image fullrun_ccd3_acisf11799_pi14-548_cl_sm2.00.img.gz, (1036, 928) - (1145, 1036)
[Mon Oct 10 14:53:04 2011] Writing fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13.gif
[Mon Oct 10 14:53:31 2011] ../../acisf11799/products/events/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_src.evt and ../../acisf11799/products/events/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Mon Oct 10 14:53:32 2011] Size of ../../acisf11799/products/events/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_src.evt.gz[events] = 37 counts
[Mon Oct 10 14:53:32 2011] Mean chipx,y = (17.08, 579.62)
[Mon Oct 10 14:53:32 2011] Mean tdetx,y = (4552.38, 3078.08)
[Mon Oct 10 14:53:32 2011] chipx,y range = (2.00-34.00, 561.00-605.00)
[Mon Oct 10 14:53:32 2011] Size of ../../acisf11799/products/events/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 43 counts
[Mon Oct 10 14:53:32 2011] ../../acisf11799/products/images/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_src.img and ../../acisf11799/products/images/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Mon Oct 10 14:53:32 2011] ../../acisf11799/products/spectra/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_src.pi and ../../acisf11799/products/spectra/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Mon Oct 10 14:53:32 2011] Not generating rmf since there are only 34 counts
[Mon Oct 10 14:53:34 2011] ../../acisf11799/products/lightcurves/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_src.lc and ../../acisf11799/products/lightcurves/fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Mon Oct 10 14:55:49 2011] 154.028
[Mon Oct 10 14:56:11 2011] Updating aperture counts using extracted products
[Mon Oct 10 14:56:11 2011] Error reading totcts from fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13_src.pi.gz
[Mon Oct 10 14:56:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 14:56:11 2011] Using photon index=1.80, rate=0.000679, arf fullrun_ccd3_acisf11799_pi14-548_pass1_cl_src13.arf
[Mon Oct 10 14:56:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 14:56:11 2011] Updating source flux to 1.1e-14
[Mon Oct 10 14:56:27 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting