[Mon Oct 10 14:46:59 2011] Detection parameters:
  Position = (793.3, 450.2) = 23 42 9.90 -51 18 12.7
  Extent = 1.9" x 1.2", rotation angle = 3 degrees
  Source counts = 20.5 +/- 5.1
  Background counts = 5.5
  Rate = 0.0004 +/- 0.0001

[Mon Oct 10 14:47:00 2011] Off-axis axis estimate = 8.12'
[Mon Oct 10 14:48:14 2011] Using EEF radius (= 2.92 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 14:48:14 2011] Initial guess for spatial extent in simple fitting = 2.92"
[Mon Oct 10 14:48:14 2011] source mask rpix=5.9, npix_max = 165, mask sum = 156, frac = 0.944
[Mon Oct 10 14:48:14 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 2.92"
[Mon Oct 10 14:48:14 2011] fullrun_ccd0_acisf11799_pi14-548_cl_pass0_src4.ximg exists
[Mon Oct 10 14:48:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11799_pi14-548_cl_pass0_src4.csv
[Mon Oct 10 14:48:14 2011] fullrun_ccd0_acisf11799_pi14-548_cl_pass0_src4_1.ximg exists
[Mon Oct 10 14:48:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11799_pi14-548_cl_pass0_src4.csv
[Mon Oct 10 14:48:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11799_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11799_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 14:48:15 2011] fullrun_ccd0_acisf11799_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Mon Oct 10 14:48:15 2011] fullrun_ccd0_acisf11799_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Oct 10 14:48:15 2011] Fit fullrun_ccd0_acisf11799_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Oct 10 14:48:26 2011] Spatial fit model total counts = 59.901600, observed total counts = 62.000000
[Mon Oct 10 14:48:26 2011] Offset between fit and detection position for source 10 = 0.981054 pixels
[Mon Oct 10 14:48:26 2011] 59.966200 total counts/ 37.587300 bgd. counts: snr = 3.650213
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.981054 pixels
  Position = (794.1, 450.7) = 23 42 9.88 -51 18 12.6
  Extent = 1.9 (1.3-2.9)", rotation angle = 0
  Source counts = 22.4 +/- 7.7
  Background counts = 37.6
  Rate = 0.0004 +/- 0.0002
[Mon Oct 10 14:48:26 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 14:48:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 14:48:26 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 14:48:26 2011] Source does appear to be extended
[Mon Oct 10 14:48:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 14:48:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 14:48:57 2011] Initial guess for spatial extent in simple fitting = 1.93"
[Mon Oct 10 14:48:57 2011] source mask rpix=3.9, npix_max = 78, mask sum = 75, frac = 0.957
[Mon Oct 10 14:48:57 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.93"
[Mon Oct 10 14:49:00 2011] fullrun_ccd0_acisf11799_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 10 14:49:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11799_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 14:49:00 2011] fullrun_ccd0_acisf11799_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 10 14:49:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11799_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 14:49:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11799_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11799_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 14:49:00 2011] fullrun_ccd0_acisf11799_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 10 14:49:00 2011] fullrun_ccd0_acisf11799_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 10 14:49:00 2011] Fit fullrun_ccd0_acisf11799_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 10 14:49:13 2011] Spatial fit model total counts = 41.971900, observed total counts = 43.000000
[Mon Oct 10 14:49:13 2011] Offset between fit and detection position for source 10 = 0.344622 pixels
[Mon Oct 10 14:49:13 2011] 42.223900 total counts/ 21.741600 bgd. counts: snr = 4.392714
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.344622 pixels
  Position = (793.8, 450.6) = 23 42 9.90 -51 18 12.7
  Extent = 1.8 (1.2-2.6)", rotation angle = 0
  Source counts = 20.5 +/- 6.5
  Background counts = 21.7
  Rate = 0.0004 +/- 0.0001
[Mon Oct 10 14:49:13 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 14:49:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 14:49:13 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 14:49:13 2011] Source does appear to be extended
[Mon Oct 10 14:49:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 14:49:41 2011] Not overwriting source region fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 10 14:49:42 2011] Extracting stamp from image fullrun_ccd0_acisf11799_pi14-548_cl_sm2.00.img.gz, (712, 369) - (876, 533)
[Mon Oct 10 14:49:42 2011] Writing fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10.gif
[Mon Oct 10 14:49:49 2011] ../../acisf11799/products/events/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_src.evt and ../../acisf11799/products/events/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 10 14:49:49 2011] Size of ../../acisf11799/products/events/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_src.evt.gz[events] = 34 counts
[Mon Oct 10 14:49:49 2011] Mean chipx,y = (488.24, 785.12)
[Mon Oct 10 14:49:49 2011] Mean tdetx,y = (3846.12, 4643.76)
[Mon Oct 10 14:49:49 2011] chipx,y range = (463.00-509.00, 760.00-810.00)
[Mon Oct 10 14:49:49 2011] Size of ../../acisf11799/products/events/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 128 counts
[Mon Oct 10 14:49:49 2011] ../../acisf11799/products/images/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_src.img and ../../acisf11799/products/images/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 10 14:49:49 2011] ../../acisf11799/products/spectra/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_src.pi and ../../acisf11799/products/spectra/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Oct 10 14:49:49 2011] Not generating rmf since there are only 20 counts
[Mon Oct 10 14:49:53 2011] ../../acisf11799/products/lightcurves/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_src.lc and ../../acisf11799/products/lightcurves/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 10 14:50:18 2011] 168.663
[Mon Oct 10 14:56:10 2011] Updating aperture counts using extracted products
[Mon Oct 10 14:56:10 2011] Error reading totcts from fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Oct 10 14:56:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 14:56:10 2011] Using photon index=1.80, rate=0.000407, arf fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10.arf
[Mon Oct 10 14:56:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 14:56:10 2011] Updating source flux to 5.6e-15
[Mon Oct 10 14:56:17 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 10 14:56:22 2011] acisf11799/analysis//spectral/fullrun_ccd0_acisf11799_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete