[Wed Oct 26 17:36:24 2011] Detection parameters:
  Position = (730.6, 304.3) = 19 31 32.97 -72 39 33.0
  Extent = 0.8" x 0.5", rotation angle = 149 degrees
  Source counts = 10.6 +/- 3.6
  Background counts = 2.4
  Rate = 0.0003 +/- 0.0001

[Wed Oct 26 17:36:26 2011] Off-axis axis estimate = 1.00'
[Wed Oct 26 17:36:39 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 17:36:39 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 26 17:36:39 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.390
[Wed Oct 26 17:36:39 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.38"
[Wed Oct 26 17:36:39 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src4.ximg exists
[Wed Oct 26 17:36:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src4.csv
[Wed Oct 26 17:36:39 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Oct 26 17:36:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src4.csv
[Wed Oct 26 17:36:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:36:40 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Oct 26 17:36:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src4.csv
[Wed Oct 26 17:36:40 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Oct 26 17:36:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src4.csv
[Wed Oct 26 17:36:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:36:43 2011] Spatial fit model total counts = 14.311400, observed total counts = 16.000000
[Wed Oct 26 17:36:43 2011] Offset between fit and detection position for source 4 = 0.398890 pixels
[Wed Oct 26 17:36:43 2011] 15.602910 total counts/ 7.774630 bgd. counts: snr = 2.807543
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.398890 pixels
  Position = (730.4, 304.6) = 19 31 33.05 -72 39 33.1
  Extent = 0.5 (0.3-1.3)", rotation angle = 0
  Source counts = 7.8 +/- 4.0
  Background counts = 7.8
  Rate = 0.0002 +/- 0.0001
[Wed Oct 26 17:36:43 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 17:36:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 17:36:43 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 17:36:43 2011] Source does appear to be extended
[Wed Oct 26 17:36:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 17:36:43 2011] Deleting source due to low Poisson probability 0.9