[Wed Oct 26 17:36:24 2011] Detection parameters:
  Position = (230.9, 723.3) = 19 32 27.74 -72 36 6.1
  Extent = 2.3" x 1.6", rotation angle = 95 degrees
  Source counts = 156.4 +/- 13.7
  Background counts = 32.6
  Rate = 0.004 +/- 0.0004

[Wed Oct 26 17:36:26 2011] Off-axis axis estimate = 6.15'
[Wed Oct 26 17:36:39 2011] Using EEF radius (= 1.71 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 17:36:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 17:36:39 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Wed Oct 26 17:36:39 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.015
[Wed Oct 26 17:36:39 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.71"
[Wed Oct 26 17:36:39 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 17:36:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 17:36:39 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 17:36:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 17:36:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11797_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:36:40 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 17:36:40 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 17:36:40 2011] Fit fullrun_ccd7_acisf11797_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 17:36:43 2011] Spatial fit model total counts = 189.000000, observed total counts = 189.000000
[Wed Oct 26 17:36:43 2011] Offset between fit and detection position for source 1 = 1.133978 pixels
[Wed Oct 26 17:36:43 2011] 189.522100 total counts/ 57.933100 bgd. counts: snr = 17.288456
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.133978 pixels
  Position = (230.6, 724.4) = 19 32 27.83 -72 36 5.8
  Extent = 1.7 (1.5-2.0)", rotation angle = 0
  Source counts = 131.6 +/- 13.8
  Background counts = 57.9
  Rate = 0.004 +/- 0.0004
[Wed Oct 26 17:36:43 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 17:36:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 17:36:43 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 17:36:43 2011] Source does appear to be extended
[Wed Oct 26 17:36:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 17:36:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 17:36:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 17:36:49 2011] Initial guess for spatial extent in simple fitting = 1.72"
[Wed Oct 26 17:36:49 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.999
[Wed Oct 26 17:36:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.72"
[Wed Oct 26 17:36:49 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 17:36:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11797_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 17:36:49 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 17:36:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11797_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 17:36:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11797_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11797_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:36:50 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 17:36:50 2011] fullrun_ccd7_acisf11797_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 17:36:50 2011] Fit fullrun_ccd7_acisf11797_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 17:36:53 2011] Spatial fit model total counts = 184.999000, observed total counts = 185.000000
[Wed Oct 26 17:36:53 2011] Offset between fit and detection position for source 1 = 0.058651 pixels
[Wed Oct 26 17:36:53 2011] 185.568800 total counts/ 51.989800 bgd. counts: snr = 18.525891
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.058651 pixels
  Position = (230.6, 724.3) = 19 32 27.83 -72 36 5.9
  Extent = 1.7 (1.5-2.1)", rotation angle = 0
  Source counts = 133.6 +/- 13.6
  Background counts = 52.0
  Rate = 0.004 +/- 0.0004
[Wed Oct 26 17:36:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 17:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 17:36:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 17:36:53 2011] Source does appear to be extended
[Wed Oct 26 17:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 17:36:59 2011] Not overwriting source region fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 17:36:59 2011] Extracting stamp from image fullrun_ccd7_acisf11797_pi14-548_cl_sm2.00.img.gz, (151, 645) - (310, 804)
[Wed Oct 26 17:36:59 2011] Writing fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 17:37:00 2011] ../../acisf11797/products/events/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_src.evt and ../../acisf11797/products/events/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 17:37:00 2011] Size of ../../acisf11797/products/events/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_src.evt.gz[events] = 175 counts
[Wed Oct 26 17:37:00 2011] Mean chipx,y = (937.69, 545.54)
[Wed Oct 26 17:37:00 2011] Mean tdetx,y = (4854.69, 2247.54)
[Wed Oct 26 17:37:00 2011] chipx,y range = (912.00-965.00, 517.00-573.00)
[Wed Oct 26 17:37:00 2011] Size of ../../acisf11797/products/events/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 273 counts
[Wed Oct 26 17:37:00 2011] ../../acisf11797/products/images/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_src.img and ../../acisf11797/products/images/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 17:37:00 2011] ../../acisf11797/products/spectra/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_src.pi and ../../acisf11797/products/spectra/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 17:37:03 2011] ../../acisf11797/products/lightcurves/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_src.lc and ../../acisf11797/products/lightcurves/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 17:37:51 2011] Keeping rmf generated by specextract
[Wed Oct 26 17:37:51 2011] 209.562
[Wed Oct 26 17:37:52 2011] Updating aperture counts using extracted products
[Wed Oct 26 17:37:52 2011] Error reading totcts from fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 17:37:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 17:37:52 2011] Using photon index=1.80, rate=0.0038, arf fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 17:37:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 17:37:52 2011] Updating source flux to 3.1e-14
[Wed Oct 26 17:38:02 2011] Reading fit data from acisf11797/analysis//spectral/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 17:38:02 2011] Spectral fit parameter nH value = 1.05707e+21
[Wed Oct 26 17:38:02 2011] Spectral fit parameter PhoIndex value = 1.3831
[Wed Oct 26 17:38:02 2011] Failed to get F(0.3-8.0) from acisf11797/analysis//spectral/fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 17:38:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 17:38:02 2011] Using Nh = 1.1e+21, photon index=1.38, rate=0.0038, arf fullrun_ccd7_acisf11797_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 17:38:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 17:38:02 2011] Updating source flux to 4e-14