[Fri Oct  7 10:19:06 2011] Detection parameters:
  Position = (284.2, 489.5) = 21 36 33.88 0 31 8.3
  Extent = 5.1" x 2.4", rotation angle = 26 degrees
  Source counts = 22.6 +/- 6.1
  Background counts = 14.4
  Rate = 0.0009 +/- 0.0002

[Fri Oct  7 10:19:06 2011] Off-axis axis estimate = 9.63'
[Fri Oct  7 10:19:56 2011] Using EEF radius (= 4.10 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 10:19:56 2011] Initial guess for spatial extent in simple fitting = 4.10"
[Fri Oct  7 10:19:56 2011] source mask rpix=8.3, npix_max = 312, mask sum = 306, frac = 0.980
[Fri Oct  7 10:19:56 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 4.10"
[Fri Oct  7 10:19:57 2011] fullrun_ccd3_acisf11796_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct  7 10:19:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11796_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 10:19:57 2011] fullrun_ccd3_acisf11796_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct  7 10:19:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11796_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 10:19:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11796_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11796_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 10:19:57 2011] fullrun_ccd3_acisf11796_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct  7 10:19:57 2011] fullrun_ccd3_acisf11796_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct  7 10:19:57 2011] Fit fullrun_ccd3_acisf11796_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct  7 10:20:04 2011] Spatial fit model total counts = 45.775800, observed total counts = 46.000000
[Fri Oct  7 10:20:04 2011] Offset between fit and detection position for source 7 = 2.784911 pixels
[Fri Oct  7 10:20:04 2011] 45.648800 total counts/ 28.429300 bgd. counts: snr = 3.229516
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.784911 pixels
  Position = (281.4, 489.5) = 21 36 33.99 0 31 8.1
  Extent = 3.4 (1.0-6.9)", rotation angle = 0
  Source counts = 17.2 +/- 6.8
  Background counts = 28.4
  Rate = 0.0007 +/- 0.0003
[Fri Oct  7 10:20:04 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 10:20:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 10:20:04 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 10:20:04 2011] Source does appear to be extended
[Fri Oct  7 10:20:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 10:20:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 10:20:27 2011] Initial guess for spatial extent in simple fitting = 3.43"
[Fri Oct  7 10:20:27 2011] source mask rpix=7.0, npix_max = 223, mask sum = 225, frac = 1.005
[Fri Oct  7 10:20:27 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 3.43"
[Fri Oct  7 10:20:28 2011] fullrun_ccd3_acisf11796_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct  7 10:20:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11796_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 10:20:28 2011] fullrun_ccd3_acisf11796_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct  7 10:20:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11796_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 10:20:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11796_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11796_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 10:20:28 2011] fullrun_ccd3_acisf11796_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct  7 10:20:28 2011] fullrun_ccd3_acisf11796_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct  7 10:20:28 2011] Fit fullrun_ccd3_acisf11796_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct  7 10:20:35 2011] Spatial fit model total counts = 37.713700, observed total counts = 38.000000
[Fri Oct  7 10:20:35 2011] Offset between fit and detection position for source 7 = 1.072611 pixels
[Fri Oct  7 10:20:35 2011] 37.891500 total counts/ 21.552200 bgd. counts: snr = 3.519554
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.072611 pixels
  Position = (280.5, 489.0) = 21 36 34.02 0 31 7.8
  Extent = 3.4 (0.9-6.1)", rotation angle = 0
  Source counts = 16.3 +/- 6.2
  Background counts = 21.6
  Rate = 0.0007 +/- 0.0002
[Fri Oct  7 10:20:35 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 10:20:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 10:20:35 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 10:20:35 2011] Source does appear to be extended
[Fri Oct  7 10:20:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 10:20:59 2011] Not overwriting source region fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_src.reg
[Fri Oct  7 10:20:59 2011] Extracting stamp from image fullrun_ccd3_acisf11796_pi14-548_cl_sm2.00.img.gz, (126, 334) - (435, 644)
[Fri Oct  7 10:20:59 2011] Writing fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7.gif
[Fri Oct  7 10:21:19 2011] ../../acisf11796/products/events/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_src.evt and ../../acisf11796/products/events/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Oct  7 10:21:19 2011] Size of ../../acisf11796/products/events/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_src.evt.gz[events] = 43 counts
[Fri Oct  7 10:21:19 2011] Mean chipx,y = (221.28, 570.91)
[Fri Oct  7 10:21:19 2011] Mean tdetx,y = (4561.09, 3282.28)
[Fri Oct  7 10:21:19 2011] chipx,y range = (189.00-261.00, 537.00-606.00)
[Fri Oct  7 10:21:19 2011] Size of ../../acisf11796/products/events/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 179 counts
[Fri Oct  7 10:21:19 2011] ../../acisf11796/products/images/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_src.img and ../../acisf11796/products/images/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Oct  7 10:21:19 2011] ../../acisf11796/products/spectra/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_src.pi and ../../acisf11796/products/spectra/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Oct  7 10:21:19 2011] Not generating rmf since there are only 16 counts
[Fri Oct  7 10:21:22 2011] ../../acisf11796/products/lightcurves/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_src.lc and ../../acisf11796/products/lightcurves/fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Oct  7 10:21:27 2011] 166.327
[Fri Oct  7 10:23:00 2011] Updating aperture counts using extracted products
[Fri Oct  7 10:23:00 2011] Error reading totcts from fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Oct  7 10:23:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 10:23:00 2011] Using photon index=1.80, rate=0.000658, arf fullrun_ccd3_acisf11796_pi14-548_pass1_cl_src7.arf
[Fri Oct  7 10:23:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 10:23:00 2011] Updating source flux to 9e-15
[Fri Oct  7 10:23:03 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting