[Thu Oct  6 08:49:31 2011] Detection parameters:
  Position = (717.7, 226.1) = 17 47 41.15 -28 23 23.7
  Extent = 0.8" x 0.5", rotation angle = 142 degrees
  Source counts = 13.5 +/- 4.2
  Background counts = 4.5
  Rate = 0.0001 +/- 4e-05

[Thu Oct  6 08:49:33 2011] Off-axis axis estimate = 2.56'
[Thu Oct  6 08:51:30 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:51:30 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Thu Oct  6 08:51:30 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.974
[Thu Oct  6 08:51:30 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 0.50"
[Thu Oct  6 08:51:41 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src53.ximg exists
[Thu Oct  6 08:51:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src53.csv
[Thu Oct  6 08:51:41 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src53_1.ximg exists
[Thu Oct  6 08:51:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src53.csv
[Thu Oct  6 08:51:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:51:44 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src53.ximg exists
[Thu Oct  6 08:51:44 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src53_1.ximg exists
[Thu Oct  6 08:51:44 2011] Fit fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src53 appears to have run properly
[Thu Oct  6 08:52:21 2011] Spatial fit model total counts = 26.177800, observed total counts = 27.000000
[Thu Oct  6 08:52:21 2011] Offset between fit and detection position for source 53 = 1.281025 pixels
[Thu Oct  6 08:52:21 2011] 24.704500 total counts/ 13.023600 bgd. counts: snr = 3.236762
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 1.281025 pixels
  Position = (717.8, 227.3) = 17 47 41.17 -28 23 23.4
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.7 +/- 5.0
  Background counts = 13.0
  Rate = 0.0001 +/- 5e-05
[Thu Oct  6 08:52:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:52:21 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:52:21 2011] Source does appear to be extended
[Thu Oct  6 08:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:53:11 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Thu Oct  6 08:53:11 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 1.000
[Thu Oct  6 08:53:11 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 0.49"
[Thu Oct  6 08:53:15 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src50.ximg exists
[Thu Oct  6 08:53:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src50.csv
[Thu Oct  6 08:53:15 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src50_1.ximg exists
[Thu Oct  6 08:53:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src50.csv
[Thu Oct  6 08:53:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:53:16 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Thu Oct  6 08:53:16 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Thu Oct  6 08:53:16 2011] Fit fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src50 appears to have run properly
[Thu Oct  6 08:53:52 2011] Spatial fit model total counts = 26.190300, observed total counts = 27.000000
[Thu Oct  6 08:53:52 2011] Offset between fit and detection position for source 53 = 0.050783 pixels
[Thu Oct  6 08:53:52 2011] 24.463800 total counts/ 12.536900 bgd. counts: snr = 3.368469
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.050783 pixels
  Position = (717.7, 227.4) = 17 47 41.17 -28 23 23.3
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.9 +/- 4.9
  Background counts = 12.5
  Rate = 0.0001 +/- 5e-05
[Thu Oct  6 08:53:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:53:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:53:52 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:53:52 2011] Source does appear to be extended
[Thu Oct  6 08:53:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 09:04:45 2011] Not overwriting source region fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_src.reg
[Thu Oct  6 09:04:45 2011] Extracting stamp from image fullrun_ccd3_acisf11795_pi14-548_cl_sm2.00.img.gz, (696, 206) - (739, 249)
[Thu Oct  6 09:04:46 2011] Writing fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53.gif
[Thu Oct  6 09:07:50 2011] ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_src.evt and ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_bgd.evt exist, delete to re-create
[Thu Oct  6 09:07:50 2011] Size of ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_src.evt.gz[events] = 15 counts
[Thu Oct  6 09:07:50 2011] Mean chipx,y = (688.87, 845.67)
[Thu Oct  6 09:07:50 2011] Mean tdetx,y = (4286.33, 3749.87)
[Thu Oct  6 09:07:50 2011] chipx,y range = (674.00-709.00, 832.00-868.00)
[Thu Oct  6 09:07:50 2011] Size of ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_bgd.evt.gz[events] = 33 counts
[Thu Oct  6 09:07:50 2011] ../../acisf11795/products/images/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_src.img and ../../acisf11795/products/images/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_bgd.img exist, delete to re-create
[Thu Oct  6 09:07:50 2011] ../../acisf11795/products/spectra/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_src.pi and ../../acisf11795/products/spectra/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_bgd.pi exist, delete to re-create
[Thu Oct  6 09:07:50 2011] Not generating rmf since there are only 11 counts
[Thu Oct  6 09:07:54 2011] ../../acisf11795/products/lightcurves/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_src.lc and ../../acisf11795/products/lightcurves/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_bgd.lc exist, delete to re-create
[Thu Oct  6 09:09:41 2011] 195.061
[Thu Oct  6 09:09:53 2011] Updating aperture counts using extracted products
[Thu Oct  6 09:09:53 2011] Error reading totcts from fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53_src.pi.gz
[Thu Oct  6 09:09:54 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:09:54 2011] Using photon index=1.80, rate=0.000121, arf fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src53.arf
[Thu Oct  6 09:09:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:09:54 2011] Updating source flux to 1.9e-15
[Thu Oct  6 09:10:21 2011] Source 53 has fewer than 100.000000 counts, skipping spectral fitting