[Thu Oct  6 08:49:31 2011] Detection parameters:
  Position = (427.6, 240.9) = 17 47 51.97 -28 23 16.4
  Extent = 1.2" x 0.5", rotation angle = 61 degrees
  Source counts = 17.4 +/- 4.8
  Background counts = 5.6
  Rate = 0.0002 +/- 5e-05

[Thu Oct  6 08:49:33 2011] Off-axis axis estimate = 4.68'
[Thu Oct  6 08:51:30 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:51:30 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Thu Oct  6 08:51:30 2011] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.070
[Thu Oct  6 08:51:30 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 1.06"
[Thu Oct  6 08:51:37 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src35.ximg exists
[Thu Oct  6 08:51:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src35.csv
[Thu Oct  6 08:51:39 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src35_1.ximg exists
[Thu Oct  6 08:51:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src35.csv
[Thu Oct  6 08:51:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:51:43 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Thu Oct  6 08:51:43 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Oct  6 08:51:43 2011] Fit fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Thu Oct  6 08:52:21 2011] Spatial fit model total counts = 28.196500, observed total counts = 28.000000
[Thu Oct  6 08:52:21 2011] Offset between fit and detection position for source 40 = 0.506690 pixels
[Thu Oct  6 08:52:21 2011] 27.580100 total counts/ 9.578700 bgd. counts: snr = 5.816383
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.506690 pixels
  Position = (428.0, 241.2) = 17 47 51.98 -28 23 16.5
  Extent = 1.0 (0.6-1.7)", rotation angle = 0
  Source counts = 18.0 +/- 5.3
  Background counts = 9.6
  Rate = 0.0002 +/- 5e-05
[Thu Oct  6 08:52:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:52:21 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:52:21 2011] Source does appear to be extended
[Thu Oct  6 08:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:53:11 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Thu Oct  6 08:53:11 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.121
[Thu Oct  6 08:53:11 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 1.03"
[Thu Oct  6 08:53:14 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src33.ximg exists
[Thu Oct  6 08:53:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src33.csv
[Thu Oct  6 08:53:14 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src33_1.ximg exists
[Thu Oct  6 08:53:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src33.csv
[Thu Oct  6 08:53:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:53:15 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Thu Oct  6 08:53:15 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Oct  6 08:53:15 2011] Fit fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Oct  6 08:53:52 2011] Spatial fit model total counts = 28.013400, observed total counts = 28.000000
[Thu Oct  6 08:53:52 2011] Offset between fit and detection position for source 40 = 0.066852 pixels
[Thu Oct  6 08:53:52 2011] 27.397640 total counts/ 9.957540 bgd. counts: snr = 5.526790
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.066852 pixels
  Position = (427.9, 241.2) = 17 47 51.98 -28 23 16.5
  Extent = 1.0 (0.6-1.7)", rotation angle = 0
  Source counts = 17.4 +/- 5.2
  Background counts = 10.0
  Rate = 0.0002 +/- 5e-05
[Thu Oct  6 08:53:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:53:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:53:52 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:53:52 2011] Source does appear to be extended
[Thu Oct  6 08:53:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 09:04:45 2011] Not overwriting source region fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_src.reg
[Thu Oct  6 09:04:45 2011] Extracting stamp from image fullrun_ccd3_acisf11795_pi14-548_cl_sm2.00.img.gz, (384, 197) - (472, 285)
[Thu Oct  6 09:04:45 2011] Writing fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40.gif
[Thu Oct  6 09:06:54 2011] ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_src.evt and ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Thu Oct  6 09:06:55 2011] Size of ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_src.evt.gz[events] = 25 counts
[Thu Oct  6 09:06:55 2011] Mean chipx,y = (402.40, 873.24)
[Thu Oct  6 09:06:55 2011] Mean tdetx,y = (4258.76, 3463.40)
[Thu Oct  6 09:06:55 2011] chipx,y range = (388.00-421.00, 855.00-888.00)
[Thu Oct  6 09:06:55 2011] Size of ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 124 counts
[Thu Oct  6 09:06:55 2011] ../../acisf11795/products/images/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_src.img and ../../acisf11795/products/images/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Thu Oct  6 09:06:55 2011] ../../acisf11795/products/spectra/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_src.pi and ../../acisf11795/products/spectra/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Thu Oct  6 09:06:55 2011] Not generating rmf since there are only 17 counts
[Thu Oct  6 09:06:58 2011] ../../acisf11795/products/lightcurves/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_src.lc and ../../acisf11795/products/lightcurves/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Thu Oct  6 09:09:41 2011] 182.265
[Thu Oct  6 09:09:53 2011] Updating aperture counts using extracted products
[Thu Oct  6 09:09:53 2011] Error reading totcts from fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40_src.pi.gz
[Thu Oct  6 09:09:54 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:09:54 2011] Using photon index=1.80, rate=0.000177, arf fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src40.arf
[Thu Oct  6 09:09:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:09:54 2011] Updating source flux to 2.9e-15
[Thu Oct  6 09:10:21 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting