[Thu Oct  6 08:49:31 2011] Detection parameters:
  Position = (897.6, 609.9) = 17 47 34.45 -28 20 14.9
  Extent = 0.8" x 0.5", rotation angle = 175 degrees
  Source counts = 16.7 +/- 4.5
  Background counts = 3.3
  Rate = 0.0002 +/- 5e-05

[Thu Oct  6 08:49:33 2011] Off-axis axis estimate = 4.84'
[Thu Oct  6 08:51:30 2011] Using EEF radius (= 1.12 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:51:30 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Thu Oct  6 08:51:30 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.980
[Thu Oct  6 08:51:30 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 1.12"
[Thu Oct  6 08:51:39 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src39.ximg exists
[Thu Oct  6 08:51:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src39.csv
[Thu Oct  6 08:51:40 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src39_1.ximg exists
[Thu Oct  6 08:51:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src39.csv
[Thu Oct  6 08:51:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:51:44 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Thu Oct  6 08:51:44 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Oct  6 08:51:44 2011] Fit fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Oct  6 08:52:21 2011] Spatial fit model total counts = 31.722600, observed total counts = 32.000000
[Thu Oct  6 08:52:21 2011] Offset between fit and detection position for source 38 = 1.333468 pixels
[Thu Oct  6 08:52:21 2011] 31.933400 total counts/ 17.260000 bgd. counts: snr = 3.531916
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.333468 pixels
  Position = (898.9, 610.2) = 17 47 34.42 -28 20 15.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 14.7 +/- 5.7
  Background counts = 17.3
  Rate = 0.0001 +/- 6e-05
[Thu Oct  6 08:52:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:52:21 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:52:21 2011] Source does appear to be extended
[Thu Oct  6 08:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:53:11 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Oct  6 08:53:11 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.075
[Thu Oct  6 08:53:11 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.58"
[Thu Oct  6 08:53:14 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src37.ximg exists
[Thu Oct  6 08:53:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src37.csv
[Thu Oct  6 08:53:14 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src37_1.ximg exists
[Thu Oct  6 08:53:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src37.csv
[Thu Oct  6 08:53:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:53:15 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Thu Oct  6 08:53:16 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Oct  6 08:53:16 2011] Fit fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Thu Oct  6 08:53:52 2011] Spatial fit model total counts = 28.819200, observed total counts = 29.000000
[Thu Oct  6 08:53:52 2011] Offset between fit and detection position for source 38 = 0.000644 pixels
[Thu Oct  6 08:53:52 2011] 29.281500 total counts/ 14.571200 bgd. counts: snr = 3.853664
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.000644 pixels
  Position = (898.9, 610.2) = 17 47 34.42 -28 20 15.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 14.7 +/- 5.4
  Background counts = 14.6
  Rate = 0.0001 +/- 5e-05
[Thu Oct  6 08:53:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:53:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:53:52 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:53:52 2011] Source does appear to be extended
[Thu Oct  6 08:53:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 09:04:45 2011] Not overwriting source region fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_src.reg
[Thu Oct  6 09:04:45 2011] Extracting stamp from image fullrun_ccd3_acisf11795_pi14-548_cl_sm2.00.img.gz, (873, 585) - (924, 636)
[Thu Oct  6 09:04:45 2011] Writing fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38.gif
[Thu Oct  6 09:07:09 2011] ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_src.evt and ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Thu Oct  6 09:07:09 2011] Size of ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_src.evt.gz[events] = 18 counts
[Thu Oct  6 09:07:09 2011] Mean chipx,y = (820.89, 445.22)
[Thu Oct  6 09:07:09 2011] Mean tdetx,y = (4686.78, 3881.89)
[Thu Oct  6 09:07:09 2011] chipx,y range = (805.00-838.00, 426.00-465.00)
[Thu Oct  6 09:07:09 2011] Size of ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 46 counts
[Thu Oct  6 09:07:09 2011] ../../acisf11795/products/images/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_src.img and ../../acisf11795/products/images/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Thu Oct  6 09:07:09 2011] ../../acisf11795/products/spectra/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_src.pi and ../../acisf11795/products/spectra/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Thu Oct  6 09:07:09 2011] Not generating rmf since there are only 14 counts
[Thu Oct  6 09:07:12 2011] ../../acisf11795/products/lightcurves/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_src.lc and ../../acisf11795/products/lightcurves/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Thu Oct  6 09:09:41 2011] 189.709
[Thu Oct  6 09:09:53 2011] Updating aperture counts using extracted products
[Thu Oct  6 09:09:53 2011] Error reading totcts from fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38_src.pi.gz
[Thu Oct  6 09:09:54 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:09:54 2011] Using photon index=1.80, rate=0.000149, arf fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src38.arf
[Thu Oct  6 09:09:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:09:54 2011] Updating source flux to 2.4e-15
[Thu Oct  6 09:10:21 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting