[Thu Oct  6 08:49:30 2011] Detection parameters:
  Position = (953.5, 678.9) = 17 47 32.37 -28 19 41.0
  Extent = 0.7" x 0.5", rotation angle = 91 degrees
  Source counts = 25.5 +/- 5.7
  Background counts = 6.5
  Rate = 0.0003 +/- 6e-05

[Thu Oct  6 08:49:33 2011] Off-axis axis estimate = 5.38'
[Thu Oct  6 08:51:30 2011] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:51:30 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Thu Oct  6 08:51:30 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Thu Oct  6 08:51:30 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 1.34"
[Thu Oct  6 08:51:36 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src25.ximg exists
[Thu Oct  6 08:51:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src25.csv
[Thu Oct  6 08:51:36 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src25_1.ximg exists
[Thu Oct  6 08:51:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src25.csv
[Thu Oct  6 08:51:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11795_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:51:43 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Thu Oct  6 08:51:43 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Oct  6 08:51:43 2011] Fit fullrun_ccd3_acisf11795_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Oct  6 08:52:21 2011] Spatial fit model total counts = 42.583600, observed total counts = 43.000000
[Thu Oct  6 08:52:21 2011] Offset between fit and detection position for source 17 = 1.995266 pixels
[Thu Oct  6 08:52:21 2011] 41.039490 total counts/ 4.289690 bgd. counts: snr = 17.743612
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.995266 pixels
  Position = (955.3, 679.7) = 17 47 32.32 -28 19 40.8
  Extent = 1.4 (0.7-1.8)", rotation angle = 0
  Source counts = 36.7 +/- 6.4
  Background counts = 4.3
  Rate = 0.0004 +/- 7e-05
[Thu Oct  6 08:52:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:52:21 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:52:21 2011] Source does appear to be extended
[Thu Oct  6 08:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:53:11 2011] Initial guess for spatial extent in simple fitting = 1.42"
[Thu Oct  6 08:53:11 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.074
[Thu Oct  6 08:53:11 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 1.42"
[Thu Oct  6 08:53:14 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src25.ximg exists
[Thu Oct  6 08:53:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src25.csv
[Thu Oct  6 08:53:14 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src25_1.ximg exists
[Thu Oct  6 08:53:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src25.csv
[Thu Oct  6 08:53:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11795_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:53:15 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Thu Oct  6 08:53:15 2011] fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Oct  6 08:53:15 2011] Fit fullrun_ccd3_acisf11795_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Oct  6 08:53:52 2011] Spatial fit model total counts = 45.930100, observed total counts = 46.000000
[Thu Oct  6 08:53:52 2011] Offset between fit and detection position for source 17 = 1.189484 pixels
[Thu Oct  6 08:53:52 2011] 45.391300 total counts/ 25.102700 bgd. counts: snr = 4.049411
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.189484 pixels
  Position = (954.1, 679.5) = 17 47 32.36 -28 19 40.9
  Extent = 0.9 (0.5-1.4)", rotation angle = 0
  Source counts = 20.3 +/- 6.7
  Background counts = 25.1
  Rate = 0.0002 +/- 7e-05
[Thu Oct  6 08:53:52 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:53:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:53:52 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:53:52 2011] Source does appear to be extended
[Thu Oct  6 08:53:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 09:04:45 2011] Not overwriting source region fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_src.reg
[Thu Oct  6 09:04:45 2011] Extracting stamp from image fullrun_ccd3_acisf11795_pi14-548_cl_sm2.00.img.gz, (915, 640) - (993, 719)
[Thu Oct  6 09:04:45 2011] Writing fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17.gif
[Thu Oct  6 09:06:23 2011] ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_src.evt and ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Thu Oct  6 09:06:23 2011] Size of ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_src.evt.gz[events] = 35 counts
[Thu Oct  6 09:06:23 2011] Mean chipx,y = (872.49, 371.31)
[Thu Oct  6 09:06:23 2011] Mean tdetx,y = (4760.69, 3933.49)
[Thu Oct  6 09:06:23 2011] chipx,y range = (853.00-891.00, 355.00-387.00)
[Thu Oct  6 09:06:23 2011] Size of ../../acisf11795/products/events/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 88 counts
[Thu Oct  6 09:06:23 2011] ../../acisf11795/products/images/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_src.img and ../../acisf11795/products/images/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Thu Oct  6 09:06:23 2011] ../../acisf11795/products/spectra/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_src.pi and ../../acisf11795/products/spectra/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Thu Oct  6 09:06:23 2011] Not generating rmf since there are only 20 counts
[Thu Oct  6 09:06:26 2011] ../../acisf11795/products/lightcurves/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_src.lc and ../../acisf11795/products/lightcurves/fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Thu Oct  6 09:09:40 2011] 187.455
[Thu Oct  6 09:09:53 2011] Updating aperture counts using extracted products
[Thu Oct  6 09:09:53 2011] Error reading totcts from fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17_src.pi.gz
[Thu Oct  6 09:09:54 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:09:54 2011] Using photon index=1.80, rate=0.000206, arf fullrun_ccd3_acisf11795_pi14-548_pass1_cl_src17.arf
[Thu Oct  6 09:09:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:09:54 2011] Updating source flux to 3.3e-15
[Thu Oct  6 09:10:21 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting