[Thu Oct  6 08:49:26 2011] Detection parameters:
  Position = (209.6, 538.6) = 17 48 4.94 -28 29 17.0
  Extent = 2.1" x 1.6", rotation angle = 99 degrees
  Source counts = 838.0 +/- 31.5
  Background counts = 153.0
  Rate = 0.009 +/- 0.0003

[Thu Oct  6 08:49:29 2011] Off-axis axis estimate = 8.32'
[Thu Oct  6 08:51:26 2011] Using EEF radius (= 3.06 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:51:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 08:51:26 2011] Initial guess for spatial extent in simple fitting = 3.06"
[Thu Oct  6 08:51:26 2011] source mask rpix=6.2, npix_max = 180, mask sum = 169, frac = 0.935
[Thu Oct  6 08:51:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.06"
[Thu Oct  6 08:51:28 2011] fullrun_ccd2_acisf11795_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 08:51:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11795_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 08:51:28 2011] fullrun_ccd2_acisf11795_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 08:51:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11795_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 08:51:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11795_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11795_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:51:29 2011] fullrun_ccd2_acisf11795_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 08:51:29 2011] fullrun_ccd2_acisf11795_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 08:51:29 2011] Fit fullrun_ccd2_acisf11795_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 08:52:12 2011] Spatial fit model total counts = 1006.450000, observed total counts = 1007.000000
[Thu Oct  6 08:52:12 2011] Offset between fit and detection position for source 5 = 0.523119 pixels
[Thu Oct  6 08:52:12 2011] 1008.903000 total counts/ 214.873000 bgd. counts: snr = 54.168397
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.523119 pixels
  Position = (210.0, 538.9) = 17 48 4.94 -28 29 17.1
  Extent = 3.1 (2.9-3.3)", rotation angle = 0
  Source counts = 794.0 +/- 31.8
  Background counts = 214.9
  Rate = 0.008 +/- 0.0003
[Thu Oct  6 08:52:12 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:52:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:52:12 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:52:12 2011] Source does appear to be extended
[Thu Oct  6 08:52:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:53:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:53:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 08:53:08 2011] Initial guess for spatial extent in simple fitting = 3.05"
[Thu Oct  6 08:53:08 2011] source mask rpix=6.2, npix_max = 179, mask sum = 196, frac = 1.090
[Thu Oct  6 08:53:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.05"
[Thu Oct  6 08:53:08 2011] fullrun_ccd2_acisf11795_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 08:53:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11795_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 08:53:09 2011] fullrun_ccd2_acisf11795_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 08:53:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11795_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 08:53:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11795_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11795_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:53:10 2011] fullrun_ccd2_acisf11795_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 08:53:10 2011] fullrun_ccd2_acisf11795_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 08:53:10 2011] Fit fullrun_ccd2_acisf11795_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 08:53:43 2011] Spatial fit model total counts = 1003.770000, observed total counts = 1004.000000
[Thu Oct  6 08:53:43 2011] Offset between fit and detection position for source 5 = 0.101025 pixels
[Thu Oct  6 08:53:43 2011] 1004.855000 total counts/ 215.430000 bgd. counts: snr = 53.784580
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.101025 pixels
  Position = (210.1, 539.0) = 17 48 4.94 -28 29 17.0
  Extent = 3.0 (2.8-3.3)", rotation angle = 0
  Source counts = 789.4 +/- 31.7
  Background counts = 215.4
  Rate = 0.008 +/- 0.0003
[Thu Oct  6 08:53:43 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:53:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:53:43 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:53:43 2011] Source does appear to be extended
[Thu Oct  6 08:53:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 09:01:51 2011] Not overwriting source region fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_src.reg
[Thu Oct  6 09:01:51 2011] Extracting stamp from image fullrun_ccd2_acisf11795_pi14-548_cl_sm2.00.img.gz, (71, 400) - (349, 678)
[Thu Oct  6 09:01:51 2011] Writing fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5.gif
[Thu Oct  6 09:01:55 2011] ../../acisf11795/products/events/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_src.evt and ../../acisf11795/products/events/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Oct  6 09:01:55 2011] Size of ../../acisf11795/products/events/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_src.evt.gz[events] = 973 counts
[Thu Oct  6 09:01:55 2011] Mean chipx,y = (872.80, 422.37)
[Thu Oct  6 09:01:55 2011] Mean tdetx,y = (3483.37, 3213.20)
[Thu Oct  6 09:01:55 2011] chipx,y range = (836.00-912.00, 380.00-459.00)
[Thu Oct  6 09:01:55 2011] Size of ../../acisf11795/products/events/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 1025 counts
[Thu Oct  6 09:01:55 2011] ../../acisf11795/products/images/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_src.img and ../../acisf11795/products/images/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Oct  6 09:01:55 2011] ../../acisf11795/products/spectra/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_src.pi and ../../acisf11795/products/spectra/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu Oct  6 09:02:01 2011] ../../acisf11795/products/lightcurves/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_src.lc and ../../acisf11795/products/lightcurves/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Oct  6 09:04:42 2011] Keeping rmf generated by specextract
[Thu Oct  6 09:04:42 2011] 152.752
[Thu Oct  6 09:09:51 2011] Updating aperture counts using extracted products
[Thu Oct  6 09:09:51 2011] Error reading totcts from fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Oct  6 09:09:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:09:52 2011] Using photon index=1.80, rate=0.00802, arf fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5.arf
[Thu Oct  6 09:09:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:09:52 2011] Updating source flux to 1.5e-13
[Thu Oct  6 09:10:21 2011] Reading fit data from acisf11795/analysis//spectral/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_pl.csv
[Thu Oct  6 09:10:21 2011] Spectral fit parameter nH value = 4.03941e+22
[Thu Oct  6 09:10:21 2011] Spectral fit parameter PhoIndex value = 0.637414
[Thu Oct  6 09:10:21 2011] Failed to get F(0.3-8.0) from acisf11795/analysis//spectral/fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 09:10:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:10:21 2011] Using Nh = 4e+22, photon index=0.64, rate=0.00802, arf fullrun_ccd2_acisf11795_pi14-548_pass1_cl_src5.arf
[Thu Oct  6 09:10:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:10:21 2011] Updating source flux to 3.1e-13