[Thu Oct  6 08:49:24 2011] Detection parameters:
  Position = (708.8, 696.8) = 17 47 3.06 -28 20 37.9
  Extent = 0.9" x 0.5", rotation angle = 46 degrees
  Source counts = 13.4 +/- 4.8
  Background counts = 9.6
  Rate = 0.0001 +/- 5e-05

[Thu Oct  6 08:49:25 2011] Off-axis axis estimate = 7.81'
[Thu Oct  6 08:51:22 2011] Using EEF radius (= 2.70 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:51:22 2011] Initial guess for spatial extent in simple fitting = 2.70"
[Thu Oct  6 08:51:22 2011] source mask rpix=5.5, npix_max = 143, mask sum = 144, frac = 1.005
[Thu Oct  6 08:51:22 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 2.70"
[Thu Oct  6 08:51:25 2011] fullrun_ccd1_acisf11795_pi14-548_cl_pass0_src30.ximg exists
[Thu Oct  6 08:51:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11795_pi14-548_cl_pass0_src30.csv
[Thu Oct  6 08:51:25 2011] fullrun_ccd1_acisf11795_pi14-548_cl_pass0_src30_1.ximg exists
[Thu Oct  6 08:51:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11795_pi14-548_cl_pass0_src30.csv
[Thu Oct  6 08:51:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11795_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11795_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:51:26 2011] fullrun_ccd1_acisf11795_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Thu Oct  6 08:51:26 2011] fullrun_ccd1_acisf11795_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Oct  6 08:51:26 2011] Fit fullrun_ccd1_acisf11795_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Oct  6 08:52:06 2011] Spatial fit model total counts = 43.180200, observed total counts = 43.000000
[Thu Oct  6 08:52:06 2011] Offset between fit and detection position for source 28 = 2.246907 pixels
[Thu Oct  6 08:52:06 2011] 42.768460 total counts/ 33.574800 bgd. counts: snr = 1.586652
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.246907 pixels
  Position = (710.2, 698.4) = 17 47 3.03 -28 20 37.3
  Extent = 0.7" x 0.7", rotation angle = 0
  Source counts = 9.2 +/- 6.5
  Background counts = 33.6
  Rate = 9e-05 +/- 7e-05
  Deleting source due to low Poisson probability