[Thu Oct  6 08:49:18 2011] Detection parameters:
  Position = (497.4, 982.8) = 17 47 15.84 -28 26 43.1
  Extent = 0.6" x 0.5", rotation angle = 165 degrees
  Source counts = 15.1 +/- 4.2
  Background counts = 2.9
  Rate = 0.0002 +/- 4e-05

[Thu Oct  6 08:49:21 2011] Off-axis axis estimate = 3.98'
[Thu Oct  6 08:51:18 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:51:18 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Thu Oct  6 08:51:18 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Thu Oct  6 08:51:18 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.82"
[Thu Oct  6 08:51:20 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src12.ximg exists
[Thu Oct  6 08:51:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src12.csv
[Thu Oct  6 08:51:20 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Oct  6 08:51:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src12.csv
[Thu Oct  6 08:51:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:51:21 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Oct  6 08:51:21 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Oct  6 08:51:21 2011] Fit fullrun_ccd0_acisf11795_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Oct  6 08:52:00 2011] Spatial fit model total counts = 26.354000, observed total counts = 27.000000
[Thu Oct  6 08:52:00 2011] Offset between fit and detection position for source 12 = 0.887434 pixels
[Thu Oct  6 08:52:00 2011] 25.664680 total counts/ 9.653080 bgd. counts: snr = 5.153494
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.887434 pixels
  Position = (498.1, 983.3) = 17 47 15.83 -28 26 43.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 16.0 +/- 5.1
  Background counts = 9.7
  Rate = 0.0002 +/- 5e-05
[Thu Oct  6 08:52:00 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:52:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:52:00 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:52:00 2011] Source does appear to be extended
[Thu Oct  6 08:52:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:53:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:53:02 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Oct  6 08:53:02 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.055
[Thu Oct  6 08:53:02 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.58"
[Thu Oct  6 08:53:03 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src9.ximg exists
[Thu Oct  6 08:53:03 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src9.csv
[Thu Oct  6 08:53:03 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Oct  6 08:53:03 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src9.csv
[Thu Oct  6 08:53:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:53:04 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Oct  6 08:53:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src9.csv
[Thu Oct  6 08:53:04 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Oct  6 08:53:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src9.csv
[Thu Oct  6 08:53:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:53:32 2011] Warning, spatial fit 9 centroid is now closest to src. 13
[Thu Oct  6 08:53:32 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:53:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:53:32 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:53:32 2011] Source does appear to be extended
[Thu Oct  6 08:53:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:54:36 2011] Not overwriting source region fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_src.reg
[Thu Oct  6 08:54:36 2011] Extracting stamp from image fullrun_ccd0_acisf11795_pi14-548_cl_sm2.00.img.gz, (471, 957) - (525, 1010)
[Thu Oct  6 08:54:36 2011] Writing fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12.gif
[Thu Oct  6 08:55:46 2011] ../../acisf11795/products/events/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_src.evt and ../../acisf11795/products/events/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Thu Oct  6 08:55:46 2011] Size of ../../acisf11795/products/events/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_src.evt.gz[events] = 18 counts
[Thu Oct  6 08:55:46 2011] Mean chipx,y = (654.50, 901.72)
[Thu Oct  6 08:55:46 2011] Mean tdetx,y = (3962.72, 4477.50)
[Thu Oct  6 08:55:46 2011] chipx,y range = (638.00-671.00, 888.00-915.00)
[Thu Oct  6 08:55:46 2011] Size of ../../acisf11795/products/events/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 37 counts
[Thu Oct  6 08:55:46 2011] ../../acisf11795/products/images/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_src.img and ../../acisf11795/products/images/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Thu Oct  6 08:55:46 2011] ../../acisf11795/products/spectra/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_src.pi and ../../acisf11795/products/spectra/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Thu Oct  6 08:55:46 2011] Not generating rmf since there are only 16 counts
[Thu Oct  6 08:55:49 2011] ../../acisf11795/products/lightcurves/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_src.lc and ../../acisf11795/products/lightcurves/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Thu Oct  6 08:58:42 2011] 187.939
[Thu Oct  6 09:09:49 2011] Updating aperture counts using extracted products
[Thu Oct  6 09:09:49 2011] Error reading totcts from fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12_src.pi.gz
[Thu Oct  6 09:09:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:09:50 2011] Using photon index=1.80, rate=0.000163, arf fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src12.arf
[Thu Oct  6 09:09:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:09:50 2011] Updating source flux to 2.7e-15
[Thu Oct  6 09:10:02 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting