[Thu Oct  6 08:49:18 2011] Detection parameters:
  Position = (124.1, 721.6) = 17 47 29.77 -28 28 51.7
  Extent = 0.9" x 0.7", rotation angle = 80 degrees
  Source counts = 129.9 +/- 11.7
  Background counts = 8.1
  Rate = 0.001 +/- 0.0001

[Thu Oct  6 08:49:21 2011] Off-axis axis estimate = 3.84'
[Thu Oct  6 08:51:18 2011] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:51:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 08:51:18 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Thu Oct  6 08:51:18 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.142
[Thu Oct  6 08:51:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.78"
[Thu Oct  6 08:51:19 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 08:51:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 08:51:20 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 08:51:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 08:51:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11795_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:51:20 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 08:51:20 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 08:51:20 2011] Fit fullrun_ccd0_acisf11795_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 08:52:00 2011] Spatial fit model total counts = 136.561000, observed total counts = 136.000000
[Thu Oct  6 08:52:00 2011] Offset between fit and detection position for source 1 = 0.662607 pixels
[Thu Oct  6 08:52:00 2011] 136.851900 total counts/ 10.912900 bgd. counts: snr = 38.123271
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.662607 pixels
  Position = (124.5, 722.1) = 17 47 29.77 -28 28 51.6
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 125.9 +/- 11.7
  Background counts = 10.9
  Rate = 0.001 +/- 0.0001
[Thu Oct  6 08:52:00 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:52:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:52:00 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:52:00 2011] Source does appear to be extended
[Thu Oct  6 08:52:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:53:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:53:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 08:53:02 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Thu Oct  6 08:53:02 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.036
[Thu Oct  6 08:53:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.84"
[Thu Oct  6 08:53:03 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 08:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 08:53:03 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 08:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 08:53:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11795_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:53:04 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 08:53:04 2011] fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 08:53:04 2011] Fit fullrun_ccd0_acisf11795_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 08:53:32 2011] Spatial fit model total counts = 135.646000, observed total counts = 136.000000
[Thu Oct  6 08:53:32 2011] Offset between fit and detection position for source 1 = 0.012739 pixels
[Thu Oct  6 08:53:32 2011] 135.760700 total counts/ 10.927700 bgd. counts: snr = 37.762873
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012739 pixels
  Position = (124.5, 722.1) = 17 47 29.77 -28 28 51.6
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 124.8 +/- 11.7
  Background counts = 10.9
  Rate = 0.001 +/- 0.0001
[Thu Oct  6 08:53:32 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 08:53:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 08:53:32 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 08:53:32 2011] Source does appear to be extended
[Thu Oct  6 08:53:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:54:34 2011] Not overwriting source region fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_src.reg
[Thu Oct  6 08:54:34 2011] Extracting stamp from image fullrun_ccd0_acisf11795_pi14-548_cl_sm2.00.img.gz, (87, 684) - (162, 760)
[Thu Oct  6 08:54:34 2011] Writing fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1.gif
[Thu Oct  6 08:55:01 2011] ../../acisf11795/products/events/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_src.evt and ../../acisf11795/products/events/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct  6 08:55:01 2011] Size of ../../acisf11795/products/events/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_src.evt.gz[events] = 132 counts
[Thu Oct  6 08:55:01 2011] Mean chipx,y = (990.17, 596.71)
[Thu Oct  6 08:55:01 2011] Mean tdetx,y = (3657.71, 4141.83)
[Thu Oct  6 08:55:01 2011] chipx,y range = (971.00-1007.00, 579.00-616.00)
[Thu Oct  6 08:55:01 2011] Size of ../../acisf11795/products/events/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 53 counts
[Thu Oct  6 08:55:01 2011] ../../acisf11795/products/images/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_src.img and ../../acisf11795/products/images/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct  6 08:55:01 2011] ../../acisf11795/products/spectra/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_src.pi and ../../acisf11795/products/spectra/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct  6 08:55:07 2011] ../../acisf11795/products/lightcurves/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_src.lc and ../../acisf11795/products/lightcurves/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct  6 08:58:42 2011] Keeping rmf generated by specextract
[Thu Oct  6 08:58:42 2011] 190.832
[Thu Oct  6 09:09:49 2011] Updating aperture counts using extracted products
[Thu Oct  6 09:09:49 2011] Error reading totcts from fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct  6 09:09:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:09:50 2011] Using photon index=1.80, rate=0.00127, arf fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1.arf
[Thu Oct  6 09:09:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:09:50 2011] Updating source flux to 2e-14
[Thu Oct  6 09:10:06 2011] Reading fit data from acisf11795/analysis//spectral/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct  6 09:10:06 2011] Spectral fit parameter nH value = 4.10763e+21
[Thu Oct  6 09:10:06 2011] Spectral fit parameter PhoIndex value = 6.13951
[Thu Oct  6 09:10:06 2011] Failed to get F(0.3-8.0) from acisf11795/analysis//spectral/fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 09:10:06 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 09:10:06 2011] Using Nh = 4.1e+21, photon index=6.14, rate=0.00127, arf fullrun_ccd0_acisf11795_pi14-548_pass1_cl_src1.arf
[Thu Oct  6 09:10:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 09:10:06 2011] Updating source flux to 1.4e-14