[Wed Sep 28 12:19:19 2011] Detection parameters:
  Position = (135.2, 558.7) = 22 41 50.61 -52 32 47.7
  Extent = 0.7" x 0.5", rotation angle = 144 degrees
  Source counts = 12.5 +/- 3.6
  Background counts = 0.5
  Rate = 0.0006 +/- 0.0002

[Wed Sep 28 12:19:19 2011] Off-axis axis estimate = 3.59'
[Wed Sep 28 12:20:19 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 12:20:19 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Wed Sep 28 12:20:19 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.046
[Wed Sep 28 12:20:19 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.72"
[Wed Sep 28 12:20:19 2011] fullrun_ccd3_acisf11789_pi14-548_cl_pass0_src7.ximg exists
[Wed Sep 28 12:20:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11789_pi14-548_cl_pass0_src7.csv
[Wed Sep 28 12:20:19 2011] fullrun_ccd3_acisf11789_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Sep 28 12:20:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11789_pi14-548_cl_pass0_src7.csv
[Wed Sep 28 12:20:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11789_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11789_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 12:20:19 2011] fullrun_ccd3_acisf11789_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Sep 28 12:20:19 2011] fullrun_ccd3_acisf11789_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Sep 28 12:20:19 2011] Fit fullrun_ccd3_acisf11789_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Sep 28 12:20:30 2011] Spatial fit model total counts = 14.478000, observed total counts = 14.000000
[Wed Sep 28 12:20:30 2011] Offset between fit and detection position for source 1 = 0.765682 pixels
[Wed Sep 28 12:20:30 2011] 14.133020 total counts/ 1.725620 bgd. counts: snr = 9.445136
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.765682 pixels
  Position = (135.9, 558.8) = 22 41 50.60 -52 32 47.9
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 12.4 +/- 3.8
  Background counts = 1.7
  Rate = 0.0006 +/- 0.0002
[Wed Sep 28 12:20:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 12:20:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 12:20:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 12:20:30 2011] Source does appear to be extended
[Wed Sep 28 12:20:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:21:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 12:21:08 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Sep 28 12:21:08 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.205
[Wed Sep 28 12:21:08 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.65"
[Wed Sep 28 12:21:10 2011] fullrun_ccd3_acisf11789_pi14-548_cl_pass1_src6.ximg exists
[Wed Sep 28 12:21:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11789_pi14-548_cl_pass1_src6.csv
[Wed Sep 28 12:21:10 2011] fullrun_ccd3_acisf11789_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Sep 28 12:21:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11789_pi14-548_cl_pass1_src6.csv
[Wed Sep 28 12:21:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11789_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11789_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 12:21:10 2011] fullrun_ccd3_acisf11789_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Sep 28 12:21:10 2011] fullrun_ccd3_acisf11789_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Sep 28 12:21:10 2011] Fit fullrun_ccd3_acisf11789_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Sep 28 12:21:24 2011] Spatial fit model total counts = 13.960700, observed total counts = 14.000000
[Wed Sep 28 12:21:24 2011] Offset between fit and detection position for source 1 = 0.021038 pixels
[Wed Sep 28 12:21:24 2011] 13.675610 total counts/ 2.020110 bgd. counts: snr = 8.200558
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021038 pixels
  Position = (135.9, 558.8) = 22 41 50.60 -52 32 47.9
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 11.7 +/- 3.7
  Background counts = 2.0
  Rate = 0.0006 +/- 0.0002
[Wed Sep 28 12:21:24 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 12:21:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 12:21:24 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 12:21:24 2011] Source does appear to be extended
[Wed Sep 28 12:21:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:25:19 2011] Not overwriting source region fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 12:25:19 2011] Extracting stamp from image fullrun_ccd3_acisf11789_pi14-548_cl_sm2.00.img.gz, (108, 531) - (164, 587)
[Wed Sep 28 12:25:19 2011] Writing fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 12:25:37 2011] ../../acisf11789/products/events/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_src.evt and ../../acisf11789/products/events/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 12:25:37 2011] Size of ../../acisf11789/products/events/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_src.evt.gz[events] = 13 counts
[Wed Sep 28 12:25:37 2011] Mean chipx,y = (522.54, 925.54)
[Wed Sep 28 12:25:37 2011] Mean tdetx,y = (4206.46, 3583.54)
[Wed Sep 28 12:25:37 2011] chipx,y range = (506.00-541.00, 908.00-943.00)
[Wed Sep 28 12:25:37 2011] Size of ../../acisf11789/products/events/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 5 counts
[Wed Sep 28 12:25:37 2011] ../../acisf11789/products/images/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_src.img and ../../acisf11789/products/images/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 12:25:37 2011] ../../acisf11789/products/spectra/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_src.pi and ../../acisf11789/products/spectra/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 12:25:37 2011] Not generating rmf since there are only 11 counts
[Wed Sep 28 12:25:40 2011] ../../acisf11789/products/lightcurves/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_src.lc and ../../acisf11789/products/lightcurves/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 12:26:07 2011] 171.454
[Wed Sep 28 12:26:16 2011] Updating aperture counts using extracted products
[Wed Sep 28 12:26:16 2011] Error reading totcts from fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 12:26:16 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 12:26:16 2011] Using photon index=1.80, rate=0.000585, arf fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 12:26:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 12:26:16 2011] Updating source flux to 8e-15
[Wed Sep 28 12:26:22 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 12:26:23 2011] acisf11789/analysis//spectral/fullrun_ccd3_acisf11789_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete