[Wed Sep 28 12:19:15 2011] Detection parameters:
  Position = (418.7, 779.1) = 22 41 38.57 -52 39 28.4
  Extent = 0.8" x 0.5", rotation angle = 101 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0002

[Wed Sep 28 12:19:17 2011] Off-axis axis estimate = 4.29'
[Wed Sep 28 12:20:15 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 12:20:15 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Wed Sep 28 12:20:15 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.887
[Wed Sep 28 12:20:15 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.92"
[Wed Sep 28 12:20:16 2011] fullrun_ccd1_acisf11789_pi14-548_cl_pass0_src9.ximg exists
[Wed Sep 28 12:20:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11789_pi14-548_cl_pass0_src9.csv
[Wed Sep 28 12:20:16 2011] fullrun_ccd1_acisf11789_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Sep 28 12:20:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11789_pi14-548_cl_pass0_src9.csv
[Wed Sep 28 12:20:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11789_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11789_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 12:20:17 2011] fullrun_ccd1_acisf11789_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Sep 28 12:20:17 2011] fullrun_ccd1_acisf11789_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Sep 28 12:20:17 2011] Fit fullrun_ccd1_acisf11789_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Sep 28 12:20:27 2011] Spatial fit model total counts = 11.647600, observed total counts = 12.000000
[Wed Sep 28 12:20:27 2011] Offset between fit and detection position for source 2 = 0.683076 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.683076 pixels
  Position = (419.1, 779.6) = 22 41 38.57 -52 39 28.4
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 11.7 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Wed Sep 28 12:20:27 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 12:20:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 12:20:27 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 12:20:27 2011] Source does appear to be extended
[Wed Sep 28 12:20:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:21:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 12:21:03 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Wed Sep 28 12:21:03 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Wed Sep 28 12:21:03 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.76"
[Wed Sep 28 12:21:06 2011] fullrun_ccd1_acisf11789_pi14-548_cl_pass1_src9.ximg exists
[Wed Sep 28 12:21:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11789_pi14-548_cl_pass1_src9.csv
[Wed Sep 28 12:21:06 2011] fullrun_ccd1_acisf11789_pi14-548_cl_pass1_src9_1.ximg exists
[Wed Sep 28 12:21:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11789_pi14-548_cl_pass1_src9.csv
[Wed Sep 28 12:21:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11789_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11789_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 12:21:07 2011] fullrun_ccd1_acisf11789_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Wed Sep 28 12:21:07 2011] fullrun_ccd1_acisf11789_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Sep 28 12:21:07 2011] Fit fullrun_ccd1_acisf11789_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Sep 28 12:21:21 2011] Spatial fit model total counts = 12.271500, observed total counts = 12.000000
[Wed Sep 28 12:21:21 2011] Offset between fit and detection position for source 2 = 0.276533 pixels
[Wed Sep 28 12:21:21 2011] 12.334995 total counts/ 0.004895 bgd. counts: snr = 176.230444
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.276533 pixels
  Position = (419.2, 779.4) = 22 41 38.56 -52 39 28.5
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 12.3 +/- 3.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Wed Sep 28 12:21:21 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 12:21:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 12:21:21 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 12:21:21 2011] Source does appear to be extended
[Wed Sep 28 12:21:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:22:52 2011] Not overwriting source region fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 12:22:52 2011] Extracting stamp from image fullrun_ccd1_acisf11789_pi14-548_cl_sm2.00.img.gz, (385, 746) - (453, 813)
[Wed Sep 28 12:22:52 2011] Writing fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 12:23:22 2011] ../../acisf11789/products/events/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_src.evt and ../../acisf11789/products/events/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 12:23:22 2011] Size of ../../acisf11789/products/events/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_src.evt.gz[events] = 12 counts
[Wed Sep 28 12:23:22 2011] Mean chipx,y = (276.50, 659.17)
[Wed Sep 28 12:23:22 2011] Mean tdetx,y = (4472.83, 4383.50)
[Wed Sep 28 12:23:22 2011] chipx,y range = (264.00-298.00, 642.00-677.00)
[Wed Sep 28 12:23:22 2011] Size of ../../acisf11789/products/events/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 4 counts
[Wed Sep 28 12:23:22 2011] ../../acisf11789/products/images/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_src.img and ../../acisf11789/products/images/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 12:23:22 2011] ../../acisf11789/products/spectra/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_src.pi and ../../acisf11789/products/spectra/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 28 12:23:22 2011] Not generating rmf since there are only 12 counts
[Wed Sep 28 12:23:25 2011] ../../acisf11789/products/lightcurves/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_src.lc and ../../acisf11789/products/lightcurves/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 12:24:01 2011] 195.289
[Wed Sep 28 12:26:15 2011] Updating aperture counts using extracted products
[Wed Sep 28 12:26:15 2011] Error reading totcts from fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 12:26:15 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 12:26:15 2011] Using photon index=1.80, rate=0.000619, arf fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 12:26:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 12:26:15 2011] Updating source flux to 7.5e-15
[Wed Sep 28 12:26:20 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 12:26:21 2011] acisf11789/analysis//spectral/fullrun_ccd1_acisf11789_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete