[Fri Oct 28 00:44:54 2011] Detection parameters:
  Position = (1110.0, 829.8) = 16 53 9.70 -1 59 16.0
  Extent = 2.5" x 1.7", rotation angle = 108 degrees
  Source counts = 21.1 +/- 5.3
  Background counts = 6.9
  Rate = 0.001 +/- 0.0003

[Fri Oct 28 00:44:55 2011] Off-axis axis estimate = 8.62'
[Fri Oct 28 00:45:40 2011] Using EEF radius (= 3.28 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 00:45:40 2011] Initial guess for spatial extent in simple fitting = 3.28"
[Fri Oct 28 00:45:40 2011] source mask rpix=6.7, npix_max = 205, mask sum = 196, frac = 0.952
[Fri Oct 28 00:45:40 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 3.28"
[Fri Oct 28 00:45:41 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct 28 00:45:41 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct 28 00:45:41 2011] Fit fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src6 appears to have run properly
[Fri Oct 28 00:45:41 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct 28 00:45:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src6.csv
[Fri Oct 28 00:45:41 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct 28 00:45:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src6.csv
[Fri Oct 28 00:45:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 00:45:50 2011] Spatial fit model total counts = 33.535100, observed total counts = 38.000000
[Fri Oct 28 00:45:50 2011] Offset between fit and detection position for source 5 = 3.372208 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.372208 pixels
  Position = (1111.1, 833.0) = 16 53 9.68 -1 59 14.7
  Extent = 3.1 (2.8-3.9)", rotation angle = 0
  Source counts = 32.0 +/- 5.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct 28 00:45:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 00:45:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 00:45:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 00:45:50 2011] Source does appear to be extended
[Fri Oct 28 00:45:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 00:46:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 00:46:09 2011] Initial guess for spatial extent in simple fitting = 3.12"
[Fri Oct 28 00:46:09 2011] source mask rpix=6.3, npix_max = 187, mask sum = 196, frac = 1.047
[Fri Oct 28 00:46:09 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 3.12"
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct 28 00:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src6.csv
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct 28 00:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src6.csv
[Fri Oct 28 00:46:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct 28 00:46:10 2011] Fit fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct 28 00:46:18 2011] Warning, spatial fit 6 centroid is now closest to src. 18
[Fri Oct 28 00:46:18 2011] Source 5 is offset by -4.216565 and -4.356931 pixels which is larger than
2 X fitted extent = 3.227187 x 3.227187, not incorporating fit results
[Fri Oct 28 00:46:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 00:46:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 00:46:18 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 00:46:18 2011] Source does appear to be extended
[Fri Oct 28 00:46:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 00:48:01 2011] Not overwriting source region fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 28 00:48:01 2011] Extracting stamp from image fullrun_ccd3_acisf11787_pi14-548_cl_sm2.00.img.gz, (968, 690) - (1254, 976)
[Fri Oct 28 00:48:01 2011] Writing fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5.gif
[Fri Oct 28 00:48:15 2011] ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_src.evt and ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 28 00:48:15 2011] Size of ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_src.evt.gz[events] = 33 counts
[Fri Oct 28 00:48:15 2011] Mean chipx,y = (37.97, 492.73)
[Fri Oct 28 00:48:15 2011] Mean tdetx,y = (4639.27, 3098.97)
[Fri Oct 28 00:48:15 2011] chipx,y range = (17.00-66.00, 464.00-520.00)
[Fri Oct 28 00:48:15 2011] Size of ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 97 counts
[Fri Oct 28 00:48:15 2011] ../../acisf11787/products/images/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_src.img and ../../acisf11787/products/images/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 28 00:48:15 2011] ../../acisf11787/products/spectra/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_src.pi and ../../acisf11787/products/spectra/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct 28 00:48:15 2011] Not generating rmf since there are only 32 counts
[Fri Oct 28 00:48:18 2011] ../../acisf11787/products/lightcurves/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_src.lc and ../../acisf11787/products/lightcurves/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 28 00:48:39 2011] 161.809
[Fri Oct 28 00:48:46 2011] Updating aperture counts using extracted products
[Fri Oct 28 00:48:46 2011] Error reading totcts from fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 28 00:48:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 00:48:46 2011] Using photon index=1.80, rate=0.00154, arf fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 00:48:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 00:48:46 2011] Updating source flux to 2.2e-14
[Fri Oct 28 00:48:56 2011] Flag b found in src. 5 procflags, skipping spectral fitting
[Fri Oct 28 00:48:56 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting