[Fri Oct 28 00:44:55 2011] Detection parameters:
  Position = (270.4, 699.0) = 16 53 37.25 -2 0 20.4
  Extent = 0.5" x 0.5", rotation angle = 48 degrees
  Source counts = 13.4 +/- 3.7
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0002

[Fri Oct 28 00:44:55 2011] Off-axis axis estimate = 2.85'
[Fri Oct 28 00:45:40 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 00:45:40 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct 28 00:45:40 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.143
[Fri Oct 28 00:45:40 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.55"
[Fri Oct 28 00:45:41 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src12.ximg exists
[Fri Oct 28 00:45:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src12.csv
[Fri Oct 28 00:45:41 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Oct 28 00:45:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src12.csv
[Fri Oct 28 00:45:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 00:45:42 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Oct 28 00:45:42 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Oct 28 00:45:42 2011] Fit fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Oct 28 00:45:50 2011] Spatial fit model total counts = 13.274400, observed total counts = 14.000000
[Fri Oct 28 00:45:50 2011] Offset between fit and detection position for source 23 = 0.683456 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.683456 pixels
  Position = (271.0, 699.4) = 16 53 37.25 -2 0 20.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 13.3 +/- 3.6
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Fri Oct 28 00:45:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 00:45:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 00:45:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 00:45:50 2011] Source does appear to be extended
[Fri Oct 28 00:45:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 00:46:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 00:46:09 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Oct 28 00:46:09 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.974
[Fri Oct 28 00:46:09 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.62"
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src12.ximg exists
[Fri Oct 28 00:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src12.csv
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Oct 28 00:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src12.csv
[Fri Oct 28 00:46:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Oct 28 00:46:10 2011] Fit fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Oct 28 00:46:18 2011] Spatial fit model total counts = 13.312900, observed total counts = 14.000000
[Fri Oct 28 00:46:18 2011] Offset between fit and detection position for source 23 = 0.124012 pixels
[Fri Oct 28 00:46:18 2011] 13.312900 total counts/ 0.000000 bgd. counts: snr = 63721212072.016205
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.124012 pixels
  Position = (270.9, 699.5) = 16 53 37.26 -2 0 20.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 13.3 +/- 3.6
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Fri Oct 28 00:46:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 00:46:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 00:46:18 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 00:46:18 2011] Source does appear to be extended
[Fri Oct 28 00:46:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 00:48:01 2011] Not overwriting source region fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_src.reg
[Fri Oct 28 00:48:01 2011] Extracting stamp from image fullrun_ccd3_acisf11787_pi14-548_cl_sm2.00.img.gz, (243, 671) - (299, 728)
[Fri Oct 28 00:48:01 2011] Writing fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23.gif
[Fri Oct 28 00:48:32 2011] ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_src.evt and ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Fri Oct 28 00:48:33 2011] Size of ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_src.evt.gz[events] = 14 counts
[Fri Oct 28 00:48:33 2011] Mean chipx,y = (864.86, 684.50)
[Fri Oct 28 00:48:33 2011] Mean tdetx,y = (4447.50, 3925.86)
[Fri Oct 28 00:48:33 2011] chipx,y range = (851.00-884.00, 671.00-701.00)
[Fri Oct 28 00:48:33 2011] Size of ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 8 counts
[Fri Oct 28 00:48:33 2011] ../../acisf11787/products/images/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_src.img and ../../acisf11787/products/images/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Fri Oct 28 00:48:33 2011] ../../acisf11787/products/spectra/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_src.pi and ../../acisf11787/products/spectra/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Fri Oct 28 00:48:33 2011] Not generating rmf since there are only 13 counts
[Fri Oct 28 00:48:35 2011] ../../acisf11787/products/lightcurves/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_src.lc and ../../acisf11787/products/lightcurves/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Fri Oct 28 00:48:39 2011] 198.037
[Fri Oct 28 00:48:46 2011] Updating aperture counts using extracted products
[Fri Oct 28 00:48:46 2011] Error reading totcts from fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23_src.pi.gz
[Fri Oct 28 00:48:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 00:48:46 2011] Using photon index=1.80, rate=0.000641, arf fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src23.arf
[Fri Oct 28 00:48:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 00:48:46 2011] Updating source flux to 7.3e-15
[Fri Oct 28 00:48:56 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting