[Fri Oct 28 00:44:54 2011] Detection parameters:
  Position = (539.4, 721.5) = 16 53 28.43 -2 0 9.3
  Extent = 0.7" x 0.5", rotation angle = 90 degrees
  Source counts = 14.3 +/- 3.9
  Background counts = 0.7
  Rate = 0.0007 +/- 0.0002

[Fri Oct 28 00:44:55 2011] Off-axis axis estimate = 4.41'
[Fri Oct 28 00:45:40 2011] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 00:45:40 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Fri Oct 28 00:45:40 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040
[Fri Oct 28 00:45:40 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.96"
[Fri Oct 28 00:45:41 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src9.ximg exists
[Fri Oct 28 00:45:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src9.csv
[Fri Oct 28 00:45:41 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Oct 28 00:45:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src9.csv
[Fri Oct 28 00:45:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11787_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 00:45:42 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Oct 28 00:45:42 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Oct 28 00:45:42 2011] Fit fullrun_ccd3_acisf11787_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Oct 28 00:45:50 2011] Spatial fit model total counts = 16.299700, observed total counts = 16.000000
[Fri Oct 28 00:45:50 2011] Offset between fit and detection position for source 11 = 0.816169 pixels
[Fri Oct 28 00:45:50 2011] 15.863400 total counts/ 0.000000 bgd. counts: snr = 801357627580362.750000
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.816169 pixels
  Position = (539.9, 722.1) = 16 53 28.42 -2 0 9.3
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 15.9 +/- 4.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Oct 28 00:45:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 00:45:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 00:45:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 00:45:50 2011] Source does appear to be extended
[Fri Oct 28 00:45:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 00:46:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 00:46:09 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Oct 28 00:46:09 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Fri Oct 28 00:46:09 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.85"
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src9.ximg exists
[Fri Oct 28 00:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src9.csv
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Oct 28 00:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src9.csv
[Fri Oct 28 00:46:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11787_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Oct 28 00:46:10 2011] fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Oct 28 00:46:10 2011] Fit fullrun_ccd3_acisf11787_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Oct 28 00:46:18 2011] Spatial fit model total counts = 16.268100, observed total counts = 16.000000
[Fri Oct 28 00:46:18 2011] Offset between fit and detection position for source 11 = 0.051902 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.051902 pixels
  Position = (539.9, 722.2) = 16 53 28.42 -2 0 9.2
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 15.7 +/- 4.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Oct 28 00:46:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 00:46:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 00:46:18 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 00:46:18 2011] Source does appear to be extended
[Fri Oct 28 00:46:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 00:48:01 2011] Not overwriting source region fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 28 00:48:01 2011] Extracting stamp from image fullrun_ccd3_acisf11787_pi14-548_cl_sm2.00.img.gz, (505, 687) - (575, 758)
[Fri Oct 28 00:48:01 2011] Writing fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11.gif
[Fri Oct 28 00:48:24 2011] ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_src.evt and ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 28 00:48:24 2011] Size of ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_src.evt.gz[events] = 15 counts
[Fri Oct 28 00:48:24 2011] Mean chipx,y = (618.40, 599.27)
[Fri Oct 28 00:48:24 2011] Mean tdetx,y = (4532.73, 3679.40)
[Fri Oct 28 00:48:24 2011] chipx,y range = (595.00-626.00, 588.00-622.00)
[Fri Oct 28 00:48:24 2011] Size of ../../acisf11787/products/events/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 11 counts
[Fri Oct 28 00:48:24 2011] ../../acisf11787/products/images/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_src.img and ../../acisf11787/products/images/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 28 00:48:24 2011] ../../acisf11787/products/spectra/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_src.pi and ../../acisf11787/products/spectra/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 28 00:48:24 2011] Not generating rmf since there are only 15 counts
[Fri Oct 28 00:48:27 2011] ../../acisf11787/products/lightcurves/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_src.lc and ../../acisf11787/products/lightcurves/fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 28 00:48:39 2011] 188.087
[Fri Oct 28 00:48:46 2011] Updating aperture counts using extracted products
[Fri Oct 28 00:48:46 2011] Error reading totcts from fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 28 00:48:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 00:48:46 2011] Using photon index=1.80, rate=0.000757, arf fullrun_ccd3_acisf11787_pi14-548_pass1_cl_src11.arf
[Fri Oct 28 00:48:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 00:48:46 2011] Updating source flux to 9.1e-15
[Fri Oct 28 00:48:56 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting