[Sat Oct 22 01:06:29 2011] Detection parameters:
  Position = (377.0, 1127.3) = 12 30 46.88 12 16 50.2
  Extent = 0.8" x 0.5", rotation angle = 31 degrees
  Source counts = 22.4 +/- 5.8
  Background counts = 11.6
  Rate = 0.0008 +/- 0.0002

[Sat Oct 22 01:06:30 2011] Off-axis axis estimate = 2.64'
[Sat Oct 22 01:09:15 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 01:09:15 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Sat Oct 22 01:09:15 2011] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.257
[Sat Oct 22 01:09:15 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.51"
[Sat Oct 22 01:09:15 2011] fullrun_ccd6_acisf11783_pi14-548_cl_pass0_src5.ximg exists
[Sat Oct 22 01:09:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11783_pi14-548_cl_pass0_src5.csv
[Sat Oct 22 01:09:15 2011] fullrun_ccd6_acisf11783_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Oct 22 01:09:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11783_pi14-548_cl_pass0_src5.csv
[Sat Oct 22 01:09:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11783_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11783_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 01:09:16 2011] fullrun_ccd6_acisf11783_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct 22 01:09:16 2011] fullrun_ccd6_acisf11783_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct 22 01:09:16 2011] Fit fullrun_ccd6_acisf11783_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Oct 22 01:09:21 2011] Spatial fit model total counts = 54.271500, observed total counts = 49.000000
[Sat Oct 22 01:09:21 2011] Offset between fit and detection position for source 1 = 0.765823 pixels
[Sat Oct 22 01:09:21 2011] 54.441400 total counts/ 28.162000 bgd. counts: snr = 4.952035
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.765823 pixels
  Position = (377.8, 1127.2) = 12 30 46.87 12 16 49.9
  Extent = 1.1" x 0.4", rotation angle = 345
  Source counts = 26.3 +/- 7.4
  Background counts = 28.2
  Rate = 0.0009 +/- 0.0003
[Sat Oct 22 01:09:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 01:09:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 01:09:21 2011] Assessing source extent using major
[Sat Oct 22 01:09:21 2011] Source does appear to be extended
[Sat Oct 22 01:09:21 2011] Computing asymmetry using major and minor axis, asym = 2.60
[Sat Oct 22 01:09:21 2011] Source is asymmetric
[Sat Oct 22 01:09:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 01:09:42 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Sat Oct 22 01:09:42 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.973
[Sat Oct 22 01:09:42 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.75"
[Sat Oct 22 01:09:42 2011] fullrun_ccd6_acisf11783_pi14-548_cl_pass1_src5.ximg exists
[Sat Oct 22 01:09:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11783_pi14-548_cl_pass1_src5.csv
[Sat Oct 22 01:09:42 2011] fullrun_ccd6_acisf11783_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Oct 22 01:09:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11783_pi14-548_cl_pass1_src5.csv
[Sat Oct 22 01:09:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11783_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11783_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 01:09:42 2011] fullrun_ccd6_acisf11783_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Oct 22 01:09:42 2011] fullrun_ccd6_acisf11783_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Oct 22 01:09:42 2011] Fit fullrun_ccd6_acisf11783_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Oct 22 01:09:48 2011] Spatial fit model total counts = 50.647700, observed total counts = 50.000000
[Sat Oct 22 01:09:48 2011] Offset between fit and detection position for source 1 = 0.266810 pixels
[Sat Oct 22 01:09:48 2011] 51.405200 total counts/ 25.192500 bgd. counts: snr = 5.222472
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.266810 pixels
  Position = (377.7, 1127.5) = 12 30 46.87 12 16 50.1
  Extent = 0.8 (0.5-1.4)", rotation angle = 0
  Source counts = 26.2 +/- 7.2
  Background counts = 25.2
  Rate = 0.0009 +/- 0.0003
[Sat Oct 22 01:09:48 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 01:09:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 01:09:48 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 01:09:48 2011] Source does appear to be extended
[Sat Oct 22 01:09:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 01:10:23 2011] Not overwriting source region fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 01:10:23 2011] Extracting stamp from image fullrun_ccd6_acisf11783_pi14-548_cl_sm2.00.img.gz, (343, 1092) - (413, 1163)
[Sat Oct 22 01:10:23 2011] Writing fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 01:10:36 2011] ../../acisf11783/products/events/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_src.evt and ../../acisf11783/products/events/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 01:10:36 2011] Size of ../../acisf11783/products/events/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_src.evt.gz[events] = 41 counts
[Sat Oct 22 01:10:36 2011] Mean chipx,y = (1006.88, 736.27)
[Sat Oct 22 01:10:36 2011] Mean tdetx,y = (3881.88, 2438.27)
[Sat Oct 22 01:10:36 2011] chipx,y range = (993.00-1023.00, 718.00-756.00)
[Sat Oct 22 01:10:36 2011] Size of ../../acisf11783/products/events/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 190 counts
[Sat Oct 22 01:10:36 2011] ../../acisf11783/products/images/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_src.img and ../../acisf11783/products/images/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 01:10:36 2011] ../../acisf11783/products/spectra/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_src.pi and ../../acisf11783/products/spectra/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 22 01:10:36 2011] Not generating rmf since there are only 26 counts
[Sat Oct 22 01:10:39 2011] ../../acisf11783/products/lightcurves/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_src.lc and ../../acisf11783/products/lightcurves/fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 01:10:46 2011] 154.035
[Sat Oct 22 01:11:31 2011] Updating aperture counts using extracted products
[Sat Oct 22 01:11:31 2011] Error reading totcts from fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 22 01:11:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 01:11:31 2011] Using photon index=1.80, rate=0.000914, arf fullrun_ccd6_acisf11783_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 01:11:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 01:11:31 2011] Updating source flux to 1.3e-14
[Sat Oct 22 01:11:40 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting