[Fri Oct 28 15:59:11 2011] Detection parameters:
  Position = (636.9, 1312.2) = 14 20 49.72 3 16 44.6
  Extent = 0.7" x 0.5", rotation angle = 27 degrees
  Source counts = 19.9 +/- 4.6
  Background counts = 1.1
  Rate = 0.0007 +/- 0.0002

[Fri Oct 28 15:59:12 2011] Off-axis axis estimate = 3.51'
[Fri Oct 28 16:00:12 2011] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:00:12 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Fri Oct 28 16:00:12 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.093
[Fri Oct 28 16:00:12 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.70"
[Fri Oct 28 16:00:13 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct 28 16:00:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src7.csv
[Fri Oct 28 16:00:13 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct 28 16:00:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src7.csv
[Fri Oct 28 16:00:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:00:13 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct 28 16:00:13 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct 28 16:00:13 2011] Fit fullrun_ccd6_acisf11781_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct 28 16:00:20 2011] Spatial fit model total counts = 22.708300, observed total counts = 23.000000
[Fri Oct 28 16:00:20 2011] Offset between fit and detection position for source 7 = 0.632702 pixels
[Fri Oct 28 16:00:20 2011] 22.897730 total counts/ 3.003830 bgd. counts: snr = 11.478424
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.632702 pixels
  Position = (637.3, 1312.7) = 14 20 49.72 3 16 44.6
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 19.9 +/- 4.8
  Background counts = 3.0
  Rate = 0.0007 +/- 0.0002
[Fri Oct 28 16:00:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:00:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:00:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:00:20 2011] Source does appear to be extended
[Fri Oct 28 16:00:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:00:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:00:42 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Fri Oct 28 16:00:42 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Fri Oct 28 16:00:42 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.81"
[Fri Oct 28 16:00:43 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct 28 16:00:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src7.csv
[Fri Oct 28 16:00:43 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct 28 16:00:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src7.csv
[Fri Oct 28 16:00:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:00:43 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct 28 16:00:43 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct 28 16:00:43 2011] Fit fullrun_ccd6_acisf11781_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct 28 16:00:50 2011] Spatial fit model total counts = 23.469400, observed total counts = 23.000000
[Fri Oct 28 16:00:50 2011] Offset between fit and detection position for source 7 = 0.084744 pixels
[Fri Oct 28 16:00:50 2011] 23.695850 total counts/ 3.217950 bgd. counts: snr = 11.415522
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.084744 pixels
  Position = (637.4, 1312.7) = 14 20 49.72 3 16 44.6
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 20.5 +/- 4.9
  Background counts = 3.2
  Rate = 0.0007 +/- 0.0002
[Fri Oct 28 16:00:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:00:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:00:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:00:50 2011] Source does appear to be extended
[Fri Oct 28 16:00:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:02:03 2011] Not overwriting source region fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_src.reg
[Fri Oct 28 16:02:03 2011] Extracting stamp from image fullrun_ccd6_acisf11781_pi14-548_cl_sm2.00.img.gz, (602, 1277) - (673, 1348)
[Fri Oct 28 16:02:03 2011] Writing fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7.gif
[Fri Oct 28 16:02:22 2011] ../../acisf11781/products/events/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_src.evt and ../../acisf11781/products/events/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Oct 28 16:02:22 2011] Size of ../../acisf11781/products/events/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_src.evt.gz[events] = 22 counts
[Fri Oct 28 16:02:22 2011] Mean chipx,y = (1009.95, 862.95)
[Fri Oct 28 16:02:22 2011] Mean tdetx,y = (3884.95, 2564.95)
[Fri Oct 28 16:02:22 2011] chipx,y range = (992.00-1023.00, 846.00-889.00)
[Fri Oct 28 16:02:22 2011] Size of ../../acisf11781/products/events/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 12 counts
[Fri Oct 28 16:02:22 2011] ../../acisf11781/products/images/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_src.img and ../../acisf11781/products/images/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Oct 28 16:02:22 2011] ../../acisf11781/products/spectra/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_src.pi and ../../acisf11781/products/spectra/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Oct 28 16:02:22 2011] Not generating rmf since there are only 20 counts
[Fri Oct 28 16:02:25 2011] ../../acisf11781/products/lightcurves/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_src.lc and ../../acisf11781/products/lightcurves/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Oct 28 16:02:45 2011] 164.754
[Fri Oct 28 16:04:16 2011] Updating aperture counts using extracted products
[Fri Oct 28 16:04:16 2011] Error reading totcts from fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Oct 28 16:04:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 16:04:16 2011] Using photon index=1.80, rate=0.00069, arf fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7.arf
[Fri Oct 28 16:04:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 16:04:16 2011] Updating source flux to 9.4e-15
[Fri Oct 28 16:04:28 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 16:04:29 2011] acisf11781/analysis//spectral/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete