[Fri Oct 28 15:59:11 2011] Detection parameters:
  Position = (449.5, 1013.7) = 14 20 55.87 3 14 17.7
  Extent = 0.7" x 0.5", rotation angle = 48 degrees
  Source counts = 20.8 +/- 4.7
  Background counts = 1.2
  Rate = 0.0007 +/- 0.0002

[Fri Oct 28 15:59:12 2011] Off-axis axis estimate = 2.53'
[Fri Oct 28 16:00:12 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:00:12 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Oct 28 16:00:12 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.986
[Fri Oct 28 16:00:12 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.50"
[Fri Oct 28 16:00:13 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct 28 16:00:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 16:00:13 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct 28 16:00:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 16:00:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11781_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:00:13 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 28 16:00:13 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 28 16:00:13 2011] Fit fullrun_ccd6_acisf11781_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 28 16:00:20 2011] Spatial fit model total counts = 37.592400, observed total counts = 39.000000
[Fri Oct 28 16:00:20 2011] Offset between fit and detection position for source 4 = 0.760222 pixels
[Fri Oct 28 16:00:20 2011] 35.917600 total counts/ 19.196100 bgd. counts: snr = 3.816530
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.760222 pixels
  Position = (449.8, 1014.4) = 14 20 55.88 3 14 17.8
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 16.7 +/- 6.0
  Background counts = 19.2
  Rate = 0.0006 +/- 0.0002
[Fri Oct 28 16:00:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:00:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:00:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:00:20 2011] Source does appear to be extended
[Fri Oct 28 16:00:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:00:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:00:42 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Oct 28 16:00:42 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.042
[Fri Oct 28 16:00:42 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.59"
[Fri Oct 28 16:00:43 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct 28 16:00:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 16:00:43 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct 28 16:00:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 16:00:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11781_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:00:43 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct 28 16:00:43 2011] fullrun_ccd6_acisf11781_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct 28 16:00:43 2011] Fit fullrun_ccd6_acisf11781_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct 28 16:00:50 2011] Spatial fit model total counts = 34.975800, observed total counts = 37.000000
[Fri Oct 28 16:00:50 2011] Offset between fit and detection position for source 4 = 0.097391 pixels
[Fri Oct 28 16:00:50 2011] 32.815200 total counts/ 16.065000 bgd. counts: snr = 4.179070
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.097391 pixels
  Position = (449.9, 1014.5) = 14 20 55.88 3 14 17.8
  Extent = 0.6 (0.4-1.2)", rotation angle = 0
  Source counts = 16.8 +/- 5.7
  Background counts = 16.1
  Rate = 0.0006 +/- 0.0002
[Fri Oct 28 16:00:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:00:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:00:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:00:50 2011] Source does appear to be extended
[Fri Oct 28 16:00:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:02:03 2011] Not overwriting source region fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 28 16:02:03 2011] Extracting stamp from image fullrun_ccd6_acisf11781_pi14-548_cl_sm2.00.img.gz, (425, 989) - (475, 1040)
[Fri Oct 28 16:02:03 2011] Writing fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4.gif
[Fri Oct 28 16:02:16 2011] ../../acisf11781/products/events/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_src.evt and ../../acisf11781/products/events/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 28 16:02:16 2011] Size of ../../acisf11781/products/events/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_src.evt.gz[events] = 21 counts
[Fri Oct 28 16:02:16 2011] Mean chipx,y = (920.19, 524.62)
[Fri Oct 28 16:02:16 2011] Mean tdetx,y = (3795.19, 2226.62)
[Fri Oct 28 16:02:16 2011] chipx,y range = (903.00-938.00, 506.00-543.00)
[Fri Oct 28 16:02:16 2011] Size of ../../acisf11781/products/events/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 10 counts
[Fri Oct 28 16:02:16 2011] ../../acisf11781/products/images/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_src.img and ../../acisf11781/products/images/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 28 16:02:16 2011] ../../acisf11781/products/spectra/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_src.pi and ../../acisf11781/products/spectra/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 28 16:02:16 2011] Not generating rmf since there are only 16 counts
[Fri Oct 28 16:02:19 2011] ../../acisf11781/products/lightcurves/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_src.lc and ../../acisf11781/products/lightcurves/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 28 16:02:45 2011] 206.156
[Fri Oct 28 16:04:16 2011] Updating aperture counts using extracted products
[Fri Oct 28 16:04:16 2011] Error reading totcts from fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 28 16:04:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 16:04:16 2011] Using photon index=1.80, rate=0.000565, arf fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4.arf
[Fri Oct 28 16:04:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 16:04:16 2011] Updating source flux to 6.1e-15
[Fri Oct 28 16:04:28 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 16:04:29 2011] acisf11781/analysis//spectral/fullrun_ccd6_acisf11781_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete