[Fri Oct 28 15:59:10 2011] Detection parameters:
  Position = (606.0, 597.9) = 14 20 46.06 3 25 42.2
  Extent = 4.0" x 3.6", rotation angle = 27 degrees
  Source counts = 384.5 +/- 21.5
  Background counts = 79.5
  Rate = 0.01 +/- 0.0007

[Fri Oct 28 15:59:10 2011] Off-axis axis estimate = 10.65'
[Fri Oct 28 16:00:11 2011] Using EEF radius (= 5.03 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:00:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 16:00:11 2011] Initial guess for spatial extent in simple fitting = 5.03"
[Fri Oct 28 16:00:11 2011] source mask rpix=10.2, npix_max = 460, mask sum = 484, frac = 1.051
[Fri Oct 28 16:00:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.03"
[Fri Oct 28 16:00:11 2011] fullrun_ccd3_acisf11781_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 16:00:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11781_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 16:00:11 2011] fullrun_ccd3_acisf11781_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 16:00:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11781_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 16:00:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11781_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11781_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:00:12 2011] fullrun_ccd3_acisf11781_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 16:00:12 2011] fullrun_ccd3_acisf11781_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 16:00:12 2011] Fit fullrun_ccd3_acisf11781_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 16:00:19 2011] Spatial fit model total counts = 510.000000, observed total counts = 510.000000
[Fri Oct 28 16:00:19 2011] Offset between fit and detection position for source 9 = 0.990728 pixels
[Fri Oct 28 16:00:19 2011] 509.484900 total counts/ 93.687900 bgd. counts: snr = 42.957559
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.990728 pixels
  Position = (606.5, 598.8) = 14 20 46.06 3 25 42.3
  Extent = 4.6 (4.2-4.9)", rotation angle = 0
  Source counts = 415.8 +/- 22.6
  Background counts = 93.7
  Rate = 0.01 +/- 0.0008
[Fri Oct 28 16:00:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:00:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:00:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:00:19 2011] Source does appear to be extended
[Fri Oct 28 16:00:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:00:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:00:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 16:00:41 2011] Initial guess for spatial extent in simple fitting = 4.57"
[Fri Oct 28 16:00:41 2011] source mask rpix=9.3, npix_max = 383, mask sum = 380, frac = 0.990
[Fri Oct 28 16:00:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.57"
[Fri Oct 28 16:00:41 2011] fullrun_ccd3_acisf11781_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 16:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11781_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 16:00:41 2011] fullrun_ccd3_acisf11781_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 16:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11781_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 16:00:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11781_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11781_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:00:41 2011] fullrun_ccd3_acisf11781_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 16:00:41 2011] fullrun_ccd3_acisf11781_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 16:00:41 2011] Fit fullrun_ccd3_acisf11781_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 16:00:48 2011] Spatial fit model total counts = 492.861000, observed total counts = 494.000000
[Fri Oct 28 16:00:48 2011] Offset between fit and detection position for source 9 = 0.078234 pixels
[Fri Oct 28 16:00:48 2011] 492.676100 total counts/ 79.046100 bgd. counts: snr = 46.523439
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.078234 pixels
  Position = (606.5, 598.7) = 14 20 46.07 3 25 42.3
  Extent = 4.6 (4.2-4.9)", rotation angle = 0
  Source counts = 413.6 +/- 22.2
  Background counts = 79.0
  Rate = 0.01 +/- 0.0007
[Fri Oct 28 16:00:48 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:00:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:00:48 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:00:48 2011] Source does appear to be extended
[Fri Oct 28 16:00:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:01:38 2011] Not overwriting source region fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_src.reg
[Fri Oct 28 16:01:38 2011] Extracting stamp from image fullrun_ccd3_acisf11781_pi14-548_cl_sm2.00.img.gz, (398, 390) - (815, 807)
[Fri Oct 28 16:01:38 2011] Writing fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9.gif
[Fri Oct 28 16:01:38 2011] ../../acisf11781/products/events/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_src.evt and ../../acisf11781/products/events/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct 28 16:01:38 2011] Size of ../../acisf11781/products/events/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_src.evt.gz[events] = 478 counts
[Fri Oct 28 16:01:38 2011] Mean chipx,y = (338.57, 528.85)
[Fri Oct 28 16:01:38 2011] Mean tdetx,y = (4603.15, 3399.57)
[Fri Oct 28 16:01:38 2011] chipx,y range = (296.00-385.00, 486.00-569.00)
[Fri Oct 28 16:01:38 2011] Size of ../../acisf11781/products/events/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 479 counts
[Fri Oct 28 16:01:38 2011] ../../acisf11781/products/images/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_src.img and ../../acisf11781/products/images/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct 28 16:01:38 2011] ../../acisf11781/products/spectra/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_src.pi and ../../acisf11781/products/spectra/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Oct 28 16:01:41 2011] ../../acisf11781/products/lightcurves/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_src.lc and ../../acisf11781/products/lightcurves/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct 28 16:02:02 2011] Keeping rmf generated by specextract
[Fri Oct 28 16:02:02 2011] 161.809
[Fri Oct 28 16:04:16 2011] Updating aperture counts using extracted products
[Fri Oct 28 16:04:16 2011] Error reading totcts from fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Oct 28 16:04:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 16:04:16 2011] Using photon index=1.80, rate=0.0139, arf fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9.arf
[Fri Oct 28 16:04:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 16:04:16 2011] Updating source flux to 2e-13
[Fri Oct 28 16:04:27 2011] Reading fit data from acisf11781/analysis//spectral/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_pl.csv
[Fri Oct 28 16:04:27 2011] Spectral fit parameter nH value = 1.09466e+17
[Fri Oct 28 16:04:27 2011] Spectral fit parameter PhoIndex value = 1.71458
[Fri Oct 28 16:04:27 2011] Failed to get F(0.3-8.0) from acisf11781/analysis//spectral/fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 16:04:27 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 16:04:27 2011] Using Nh = 1.1e+17, photon index=1.71, rate=0.0139, arf fullrun_ccd3_acisf11781_pi14-548_pass1_cl_src9.arf
[Fri Oct 28 16:04:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 16:04:27 2011] Updating source flux to 2.1e-13