[Sat Feb 11 14:20:56 2012] Detection parameters:
  Position = (359.9, 949.9) = 13 19 34.71 -12 42 46.4
  Extent = 0.7" x 0.5", rotation angle = 102 degrees
  Source counts = 14.2 +/- 3.9
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0001

[Sat Feb 11 14:20:58 2012] Off-axis axis estimate = 3.15'
[Sat Feb 11 15:00:23 2012] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 15:00:23 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Sat Feb 11 15:00:23 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.317
[Sat Feb 11 15:00:23 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.61"
[Sat Feb 11 15:15:14 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src7.ximg exists
[Sat Feb 11 15:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src7.csv
[Sat Feb 11 15:15:14 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Feb 11 15:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src7.csv
[Sat Feb 11 15:15:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 15:15:14 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Feb 11 15:15:14 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Feb 11 15:15:14 2012] Fit fullrun_ccd6_acisf11780_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Feb 11 15:31:27 2012] Spatial fit model total counts = 15.175100, observed total counts = 16.000000
[Sat Feb 11 15:31:27 2012] Offset between fit and detection position for source 3 = 0.519479 pixels
[Sat Feb 11 15:31:27 2012] 15.214160 total counts/ 2.324160 bgd. counts: snr = 8.455123
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.519479 pixels
  Position = (360.4, 949.8) = 13 19 34.71 -12 42 46.7
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 12.9 +/- 3.9
  Background counts = 2.3
  Rate = 0.0004 +/- 0.0001
[Sat Feb 11 15:31:27 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 15:31:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 15:31:27 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 15:31:27 2012] Source does appear to be extended
[Sat Feb 11 15:31:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 16:13:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 16:13:39 2012] Initial guess for spatial extent in simple fitting = 0.56"
[Sat Feb 11 16:13:39 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.830
[Sat Feb 11 16:13:39 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.56"
[Sat Feb 11 16:25:53 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src7.ximg exists
[Sat Feb 11 16:25:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src7.csv
[Sat Feb 11 16:25:53 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src7_1.ximg exists
[Sat Feb 11 16:25:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src7.csv
[Sat Feb 11 16:25:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 16:25:53 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sat Feb 11 16:25:53 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Feb 11 16:25:53 2012] Fit fullrun_ccd6_acisf11780_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Feb 11 16:42:57 2012] Spatial fit model total counts = 15.577400, observed total counts = 16.000000
[Sat Feb 11 16:42:57 2012] Offset between fit and detection position for source 3 = 0.094801 pixels
[Sat Feb 11 16:42:57 2012] 15.659150 total counts/ 2.926050 bgd. counts: snr = 7.443776
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.094801 pixels
  Position = (360.4, 949.7) = 13 19 34.71 -12 42 46.8
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 12.7 +/- 4.0
  Background counts = 2.9
  Rate = 0.0004 +/- 0.0001
[Sat Feb 11 16:42:57 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 16:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 16:42:57 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 16:42:57 2012] Source does appear to be extended
[Sat Feb 11 16:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 16:48:04 2012] Writing source region out to fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3_src.reg
[Sat Feb 11 16:48:04 2012] Extracting stamp from image fullrun_ccd6_acisf11780_pi14-548_cl_sm2.00.img.gz, (335, 924) - (386, 975)
[Sat Feb 11 16:48:04 2012] Writing fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3.gif
[Sat Feb 11 16:52:03 2012] Size of ../../acisf11780/products/events/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3_src.evt.gz[events] = 14 counts
[Sat Feb 11 16:52:03 2012] Mean chipx,y = (887.86, 334.57)
[Sat Feb 11 16:52:03 2012] Mean tdetx,y = (3762.86, 2036.57)
[Sat Feb 11 16:52:03 2012] chipx,y range = (870.00-906.00, 319.00-352.00)
[Sat Feb 11 16:52:03 2012] Size of ../../acisf11780/products/events/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 8 counts
[Sat Feb 11 16:52:04 2012] Not generating rmf since there are only 12 counts
[Sat Feb 11 16:52:04 2012] arf not found, will run specextract
[Sat Feb 11 16:52:27 2012] ../../acisf11780/products/spectra/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3.warf not found
[Sat Feb 11 16:52:27 2012] ../../acisf11780/products/spectra/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3.wrmf not found
[Sat Feb 11 16:52:27 2012] Removal of ../../acisf11780/products/spectra/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3.soff failed
[Sat Feb 11 17:00:12 2012] Spectrum 3 has only 13 counts, deleting rmf
[Sat Feb 11 17:00:12 2012] 202.976
[Sat Feb 11 17:06:25 2012] Updating aperture counts using extracted products
[Sat Feb 11 17:06:25 2012] Error reading totcts from fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Feb 11 17:06:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 17:06:25 2012] Using photon index=1.80, rate=0.000444, arf fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3.arf
[Sat Feb 11 17:06:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 17:06:25 2012] Updating source flux to 4.8e-15
[Sat Feb 11 17:06:33 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 11 17:06:34 2012] acisf11780/analysis//spectral/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete