[Sat Feb 11 14:20:57 2012] Detection parameters:
  Position = (936.3, 1179.6) = 13 19 15.33 -12 40 53.4
  Extent = 0.7" x 0.5", rotation angle = 126 degrees
  Source counts = 10.1 +/- 3.3
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Sat Feb 11 14:20:58 2012] Off-axis axis estimate = 4.25'
[Sat Feb 11 15:00:23 2012] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 15:00:23 2012] Initial guess for spatial extent in simple fitting = 0.91"
[Sat Feb 11 15:00:23 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.135
[Sat Feb 11 15:00:23 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.91"
[Sat Feb 11 15:15:14 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src10.ximg exists
[Sat Feb 11 15:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src10.csv
[Sat Feb 11 15:15:14 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Feb 11 15:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src10.csv
[Sat Feb 11 15:15:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11780_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 15:15:14 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Feb 11 15:15:14 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Feb 11 15:15:14 2012] Fit fullrun_ccd6_acisf11780_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Feb 11 15:31:27 2012] Spatial fit model total counts = 13.609200, observed total counts = 13.000000
[Sat Feb 11 15:31:27 2012] Offset between fit and detection position for source 11 = 0.748334 pixels
[Sat Feb 11 15:31:27 2012] 13.916930 total counts/ 3.248430 bgd. counts: snr = 5.919249
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.748334 pixels
  Position = (936.6, 1180.3) = 13 19 15.34 -12 40 53.3
  Extent = 0.7 (0.5-1.4)", rotation angle = 0
  Source counts = 10.7 +/- 3.7
  Background counts = 3.2
  Rate = 0.0004 +/- 0.0001
[Sat Feb 11 15:31:27 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 15:31:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 15:31:27 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 15:31:27 2012] Source does appear to be extended
[Sat Feb 11 15:31:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 16:13:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 16:13:39 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Feb 11 16:13:39 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.032
[Sat Feb 11 16:13:39 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.72"
[Sat Feb 11 16:25:53 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src9.ximg exists
[Sat Feb 11 16:25:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src9.csv
[Sat Feb 11 16:25:53 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src9_1.ximg exists
[Sat Feb 11 16:25:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src9.csv
[Sat Feb 11 16:25:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11780_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 16:25:53 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat Feb 11 16:25:53 2012] fullrun_ccd6_acisf11780_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Feb 11 16:25:53 2012] Fit fullrun_ccd6_acisf11780_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Feb 11 16:42:57 2012] Spatial fit model total counts = 12.997900, observed total counts = 13.000000
[Sat Feb 11 16:42:57 2012] Offset between fit and detection position for source 11 = 0.332796 pixels
[Sat Feb 11 16:42:57 2012] 13.167850 total counts/ 2.350650 bgd. counts: snr = 7.055388
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.332796 pixels
  Position = (936.8, 1180.0) = 13 19 15.33 -12 40 53.4
  Extent = 0.8 (0.6-1.3)", rotation angle = 0
  Source counts = 10.8 +/- 3.6
  Background counts = 2.4
  Rate = 0.0004 +/- 0.0001
[Sat Feb 11 16:42:57 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 16:42:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 16:42:57 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 16:42:57 2012] Source does appear to be extended
[Sat Feb 11 16:42:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 16:48:04 2012] Writing source region out to fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11_src.reg
[Sat Feb 11 16:48:04 2012] Extracting stamp from image fullrun_ccd6_acisf11780_pi14-548_cl_sm2.00.img.gz, (899, 1142) - (974, 1218)
[Sat Feb 11 16:48:04 2012] Writing fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11.gif
[Sat Feb 11 16:53:07 2012] Size of ../../acisf11780/products/events/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11_src.evt.gz[events] = 13 counts
[Sat Feb 11 16:53:07 2012] Mean chipx,y = (976.62, 944.08)
[Sat Feb 11 16:53:07 2012] Mean tdetx,y = (3851.62, 2646.08)
[Sat Feb 11 16:53:07 2012] chipx,y range = (960.00-992.00, 935.00-959.00)
[Sat Feb 11 16:53:07 2012] Size of ../../acisf11780/products/events/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 13 counts
[Sat Feb 11 16:53:08 2012] Not generating rmf since there are only 10 counts
[Sat Feb 11 16:53:08 2012] arf not found, will run specextract
[Sat Feb 11 16:53:44 2012] ../../acisf11780/products/spectra/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11.warf not found
[Sat Feb 11 16:53:44 2012] ../../acisf11780/products/spectra/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11.wrmf not found
[Sat Feb 11 16:53:44 2012] Removal of ../../acisf11780/products/spectra/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11.soff failed
[Sat Feb 11 17:00:12 2012] Spectrum 11 has only 11 counts, deleting rmf
[Sat Feb 11 17:00:12 2012] 194.367
[Sat Feb 11 17:06:25 2012] Updating aperture counts using extracted products
[Sat Feb 11 17:06:25 2012] Error reading totcts from fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Feb 11 17:06:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 17:06:25 2012] Using photon index=1.80, rate=0.000377, arf fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11.arf
[Sat Feb 11 17:06:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 17:06:25 2012] Updating source flux to 4.5e-15
[Sat Feb 11 17:06:33 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 11 17:06:34 2012] acisf11780/analysis//spectral/fullrun_ccd6_acisf11780_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete