[Fri Sep 23 05:02:29 2011] Detection parameters:
  Position = (426.1, 73.7) = 12 52 14.58 -10 18 8.5
  Extent = 1.9" x 1.5", rotation angle = 108 degrees
  Source counts = 118.2 +/- 15.4
  Background counts = 117.8
  Rate = 0.004 +/- 0.0005

[Fri Sep 23 05:02:29 2011] Off-axis axis estimate = 11.05'
[Fri Sep 23 05:03:51 2011] Using EEF radius (= 5.43 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:03:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 05:03:51 2011] Initial guess for spatial extent in simple fitting = 5.43"
[Fri Sep 23 05:03:51 2011] source mask rpix=11.0, npix_max = 531, mask sum = 529, frac = 0.995
[Fri Sep 23 05:03:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.43"
[Fri Sep 23 05:03:51 2011] fullrun_ccd5_acisf11779_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 05:03:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf11779_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 05:03:52 2011] fullrun_ccd5_acisf11779_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 05:03:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf11779_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 05:03:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf11779_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf11779_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:03:52 2011] fullrun_ccd5_acisf11779_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 05:03:52 2011] fullrun_ccd5_acisf11779_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 05:03:52 2011] Fit fullrun_ccd5_acisf11779_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 05:04:01 2011] Spatial fit model total counts = 632.493000, observed total counts = 615.000000
[Fri Sep 23 05:04:01 2011] Offset between fit and detection position for source 3 = 6.217703 pixels
[Fri Sep 23 05:04:01 2011] 633.263000 total counts/ 340.144000 bgd. counts: snr = 15.893244
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.217703 pixels
  Position = (422.1, 78.4) = 12 52 14.73 -10 18 6.4
  Extent = 7.3 (5.9-8.8)", rotation angle = 0
  Source counts = 293.1 +/- 25.2
  Background counts = 340.1
  Rate = 0.009 +/- 0.0008
[Fri Sep 23 05:04:01 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:04:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:04:01 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 05:04:01 2011] Source does appear to be extended
[Fri Sep 23 05:04:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 05:04:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:04:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 05:04:27 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Sep 23 05:04:27 2011] source mask rpix=14.9, npix_max = 947, mask sum = 961, frac = 1.014
[Fri Sep 23 05:04:27 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.33"
[Fri Sep 23 05:04:27 2011] fullrun_ccd5_acisf11779_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 05:04:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf11779_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 05:04:27 2011] fullrun_ccd5_acisf11779_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 05:04:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf11779_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 05:04:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf11779_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf11779_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:04:27 2011] fullrun_ccd5_acisf11779_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 05:04:27 2011] fullrun_ccd5_acisf11779_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 05:04:27 2011] Fit fullrun_ccd5_acisf11779_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 05:04:35 2011] Spatial fit model total counts = 953.400000, observed total counts = 867.000000
[Fri Sep 23 05:04:35 2011] Offset between fit and detection position for source 3 = 1.670383 pixels
[Fri Sep 23 05:04:35 2011] 954.333000 total counts/ 650.732000 bgd. counts: snr = 11.901511
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.670383 pixels
  Position = (421.0, 79.6) = 12 52 14.77 -10 18 5.8
  Extent = 7.5 (6.3-8.6)", rotation angle = 0
  Source counts = 303.6 +/- 30.9
  Background counts = 650.7
  Rate = 0.009 +/- 0.0009
[Fri Sep 23 05:04:35 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:04:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:04:35 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 05:04:35 2011] Source does appear to be extended
[Fri Sep 23 05:04:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 05:05:34 2011] Not overwriting source region fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 23 05:05:34 2011] Extracting stamp from image fullrun_ccd5_acisf11779_pi14-548_cl_sm2.00.img.gz, (80, 0) - (762, 421)
[Fri Sep 23 05:05:34 2011] Writing fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3.gif
[Fri Sep 23 05:05:35 2011] ../../acisf11779/products/events/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_src.evt and ../../acisf11779/products/events/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 23 05:05:35 2011] Size of ../../acisf11779/products/events/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_src.evt.gz[events] = 781 counts
[Fri Sep 23 05:05:35 2011] Mean chipx,y = (982.15, 918.18)
[Fri Sep 23 05:05:35 2011] Mean tdetx,y = (2815.15, 2620.18)
[Fri Sep 23 05:05:35 2011] chipx,y range = (911.00-1023.00, 845.00-991.00)
[Fri Sep 23 05:05:35 2011] Size of ../../acisf11779/products/events/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3030 counts
[Fri Sep 23 05:05:35 2011] ../../acisf11779/products/images/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_src.img and ../../acisf11779/products/images/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 23 05:05:35 2011] ../../acisf11779/products/spectra/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_src.pi and ../../acisf11779/products/spectra/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 23 05:05:38 2011] ../../acisf11779/products/lightcurves/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_src.lc and ../../acisf11779/products/lightcurves/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 23 05:05:38 2011] Keeping rmf generated by specextract
[Fri Sep 23 05:05:38 2011] 151.886
[Fri Sep 23 05:08:22 2011] Updating aperture counts using extracted products
[Fri Sep 23 05:08:22 2011] Error reading totcts from fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 23 05:08:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 05:08:22 2011] Using photon index=1.80, rate=0.0093, arf fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3.arf
[Fri Sep 23 05:08:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 05:08:22 2011] Updating source flux to 1e-13
[Fri Sep 23 05:08:34 2011] Reading fit data from acisf11779/analysis//spectral/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_pl.csv
[Fri Sep 23 05:08:34 2011] Spectral fit parameter nH value = 4.44736e+14
[Fri Sep 23 05:08:34 2011] Spectral fit parameter PhoIndex value = 1.28944
[Fri Sep 23 05:08:34 2011] Failed to get F(0.3-8.0) from acisf11779/analysis//spectral/fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 05:08:34 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 05:08:34 2011] Using Nh = 4.4e+14, photon index=1.29, rate=0.0093, arf fullrun_ccd5_acisf11779_pi14-548_pass1_cl_src3.arf
[Fri Sep 23 05:08:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 05:08:34 2011] Updating source flux to 1.3e-13