[Wed Feb 29 01:24:41 2012] Detection parameters:
  Position = (681.3, 702.3) = 12 20 51.55 75 28 22.9
  Extent = 1.6" x 1.1", rotation angle = 143 degrees
  Source counts = 89.3 +/- 10.0
  Background counts = 10.7
  Rate = 0.003 +/- 0.0003

[Wed Feb 29 01:24:42 2012] Off-axis axis estimate = 6.23'
[Wed Feb 29 04:22:16 2012] Using EEF radius (= 1.75 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 04:22:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 04:22:16 2012] Initial guess for spatial extent in simple fitting = 1.75"
[Wed Feb 29 04:22:16 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.974
[Wed Feb 29 04:22:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.75"
[Wed Feb 29 04:26:40 2012] fullrun_ccd6_acisf11778_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 29 04:26:40 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11778_pi14-548_cl_pass0_src1.csv
[Wed Feb 29 04:26:40 2012] fullrun_ccd6_acisf11778_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 29 04:26:40 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11778_pi14-548_cl_pass0_src1.csv
[Wed Feb 29 04:26:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11778_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11778_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 04:26:40 2012] fullrun_ccd6_acisf11778_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 29 04:26:40 2012] fullrun_ccd6_acisf11778_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 29 04:26:40 2012] Fit fullrun_ccd6_acisf11778_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 29 04:55:49 2012] Spatial fit model total counts = 96.766400, observed total counts = 97.000000
[Wed Feb 29 04:55:49 2012] Offset between fit and detection position for source 4 = 0.475083 pixels
[Wed Feb 29 04:55:49 2012] 97.470100 total counts/ 18.146200 bgd. counts: snr = 18.621352
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.475083 pixels
  Position = (681.2, 702.7) = 12 20 51.62 75 28 22.9
  Extent = 2.4 (1.8-3.1)", rotation angle = 0
  Source counts = 79.3 +/- 9.9
  Background counts = 18.1
  Rate = 0.003 +/- 0.0003
[Wed Feb 29 04:55:49 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 04:55:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 04:55:49 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 04:55:49 2012] Source does appear to be extended
[Wed Feb 29 04:55:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 07:04:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 07:04:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 07:04:18 2012] Initial guess for spatial extent in simple fitting = 2.43"
[Wed Feb 29 07:04:18 2012] source mask rpix=4.9, npix_max = 118, mask sum = 121, frac = 1.025
[Wed Feb 29 07:04:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.43"
[Wed Feb 29 07:09:32 2012] fullrun_ccd6_acisf11778_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 29 07:09:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11778_pi14-548_cl_pass1_src1.csv
[Wed Feb 29 07:09:32 2012] fullrun_ccd6_acisf11778_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 29 07:09:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11778_pi14-548_cl_pass1_src1.csv
[Wed Feb 29 07:09:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11778_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11778_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 07:09:32 2012] fullrun_ccd6_acisf11778_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 29 07:09:32 2012] fullrun_ccd6_acisf11778_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 29 07:09:32 2012] Fit fullrun_ccd6_acisf11778_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 29 07:40:41 2012] Spatial fit model total counts = 105.765000, observed total counts = 106.000000
[Wed Feb 29 07:40:41 2012] Offset between fit and detection position for source 4 = 0.670469 pixels
[Wed Feb 29 07:40:41 2012] 105.495594 total counts/ 0.594594 bgd. counts: snr = 136.040859
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.670469 pixels
  Position = (681.8, 703.2) = 12 20 51.55 75 28 23.1
  Extent = 3.0 (2.5-3.4)", rotation angle = 0
  Source counts = 104.9 +/- 10.3
  Background counts = 0.6
  Rate = 0.004 +/- 0.0003
[Wed Feb 29 07:40:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 07:40:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 07:40:41 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 07:40:41 2012] Source does appear to be extended
[Wed Feb 29 07:40:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 07:49:02 2012] Writing source region out to fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4_src.reg
[Wed Feb 29 07:49:02 2012] Extracting stamp from image fullrun_ccd6_acisf11778_pi14-548_cl_sm2.00.img.gz, (543, 564) - (821, 842)
[Wed Feb 29 07:49:02 2012] Writing fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4.gif
[Wed Feb 29 07:49:03 2012] Size of ../../acisf11778/products/events/fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4_src.evt.gz[events] = 109 counts
[Wed Feb 29 07:49:03 2012] Mean chipx,y = (477.68, 484.32)
[Wed Feb 29 07:49:03 2012] Mean tdetx,y = (3352.68, 2186.32)
[Wed Feb 29 07:49:03 2012] chipx,y range = (452.00-507.00, 453.00-519.00)
[Wed Feb 29 07:49:03 2012] Size of ../../acisf11778/products/events/fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 221 counts
[Wed Feb 29 07:49:04 2012] rmf not found, will run specextract
[Wed Feb 29 07:49:04 2012] arf not found, will run specextract
[Wed Feb 29 07:49:38 2012] ../../acisf11778/products/spectra/fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4.warf not found
[Wed Feb 29 07:49:38 2012] ../../acisf11778/products/spectra/fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4.wrmf not found
[Wed Feb 29 07:49:38 2012] Removal of ../../acisf11778/products/spectra/fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4.soff failed
[Wed Feb 29 07:55:15 2012] Keeping rmf generated by specextract
[Wed Feb 29 07:55:15 2012] 185.846
[Wed Feb 29 08:06:09 2012] Updating aperture counts using extracted products
[Wed Feb 29 08:06:09 2012] Error reading totcts from fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Feb 29 08:06:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 08:06:09 2012] Using photon index=1.80, rate=0.00352, arf fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4.arf
[Wed Feb 29 08:06:09 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 08:06:09 2012] Updating source flux to 4.1e-14
[Wed Feb 29 08:06:23 2012] Reading fit data from acisf11778/analysis//spectral/fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4_pl.csv
[Wed Feb 29 08:06:23 2012] Spectral fit parameter nH value = 8.57276e+13
[Wed Feb 29 08:06:23 2012] Spectral fit parameter PhoIndex value = 1.85178
[Wed Feb 29 08:06:23 2012] Failed to get F(0.3-8.0) from acisf11778/analysis//spectral/fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Feb 29 08:06:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 08:06:23 2012] Using Nh = 8.6e+13, photon index=1.85, rate=0.00352, arf fullrun_ccd6_acisf11778_pi14-548_pass1_cl_src4.arf
[Wed Feb 29 08:06:23 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 08:06:23 2012] Updating source flux to 4.2e-14